From: Vardan Mikayelyan <[email protected]>

Calculate the interval according to the USB 2.0 specification section
9.6.6.

Tested-by: John Keeping <[email protected]>
Signed-off-by: Vardan Mikayelyan <[email protected]>
Signed-off-by: John Youn <[email protected]>
---
 drivers/usb/dwc2/core.h   | 2 +-
 drivers/usb/dwc2/gadget.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 22fa1f5..f2e7de7 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -139,7 +139,7 @@ struct dwc2_hsotg_req;
  *          means that it is sending data to the Host.
  * @index: The index for the endpoint registers.
  * @mc: Multi Count - number of transactions per microframe
- * @interval - Interval for periodic endpoints
+ * @interval - Interval for periodic endpoints, in frames or microframes.
  * @name: The name array passed to the USB core.
  * @halted: Set if the endpoint has been halted.
  * @periodic: Set if this is a periodic ep, such as Interrupt
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7f15bc0..2e98241 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2693,16 +2693,13 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
        hs_ep->periodic = 0;
        hs_ep->halted = 0;
        hs_ep->interval = desc->bInterval;
-       hs_ep->has_correct_parity = 0;
-
-       if (hs_ep->interval > 1 && hs_ep->mc > 1)
-               dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
 
        switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
        case USB_ENDPOINT_XFER_ISOC:
                epctrl |= DXEPCTL_EPTYPE_ISO;
                epctrl |= DXEPCTL_SETEVENFR;
                hs_ep->isochronous = 1;
+               hs_ep->interval = 1 << (desc->bInterval - 1);
                if (dir_in)
                        hs_ep->periodic = 1;
                break;
@@ -2715,6 +2712,9 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
                if (dir_in)
                        hs_ep->periodic = 1;
 
+               if (hsotg->gadget.speed == USB_SPEED_HIGH)
+                       hs_ep->interval = 1 << (desc->bInterval - 1);
+
                epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
                break;
 
-- 
2.8.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to