Move calling set_speed() from open() to rtl_hw_phy_work_func_t().
Then, we would set the default speed only for first initialization
or after resuming.
Besides, the set_speed() could handle the flag of PHY_RESET which
would be set in rtl_ops.hw_phy_cfg().
Signed-off-by: Hayes Wang <hayesw...@realtek.com>
---
drivers/net/usb/r8152.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 46fe9a7..dcdc4fa 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3051,6 +3051,10 @@ static void rtl_hw_phy_work_func_t(struct work_struct
*work)
tp->rtl_ops.hw_phy_cfg(tp);
+ rtl8152_set_speed(tp, AUTONEG_ENABLE,
+ tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
+ DUPLEX_FULL);
+
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
@@ -3104,9 +3108,6 @@ static int rtl8152_open(struct net_device *netdev)
tp->rtl_ops.up(tp);
- rtl8152_set_speed(tp, AUTONEG_ENABLE,
- tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
- DUPLEX_FULL);
netif_carrier_off(netdev);
netif_start_queue(netdev);
set_bit(WORK_ENABLE, &tp->flags);
@@ -3549,10 +3550,6 @@ static int rtl8152_resume(struct usb_interface *intf)
napi_enable(&tp->napi);
} else {
tp->rtl_ops.up(tp);
- rtl8152_set_speed(tp, AUTONEG_ENABLE,
- tp->mii.supports_gmii ?
- SPEED_1000 : SPEED_100,
- DUPLEX_FULL);
netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
}
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
