On Wed, Jun 15, 2016 at 5:51 PM, Alan Stern <st...@rowland.harvard.edu> wrote: > On Wed, 15 Jun 2016, Sedat Dilek wrote: > >> Hi Alan, >> >> I updated my usb-ids on my Ubuntu 12.04 LTS (AMD64). >> Background was my ASMedia ASM-104x USB-3.0 controller/hub shows no >> human-readable vendor-string etc. >> >> While checking parallelelly a new usbutils release, I saw your >> "usbreset" example program in the corresponding GitHub repo [1]. >> >> Sometimes my Internet connection does not get established and I do not >> want to plug-off it from my hardware (usb-2 port). >> I hope your usbrest program can do the trick software-technically. >> >> So how do I reset my Internet stick? >> >> $ lsusb | grep -i huawei >> Bus 001 Device 005: ID 12d1:1436 Huawei Technologies Co., Ltd. Broadband >> stick >> >> [ Excerpts from my dmesg-outputs ] >> >> [ 22.352232] cdc_ether 1-1.2:1.1 wwan0: register 'cdc_ether' at >> usb-0000:00:1a.0-1.2, Mobile Broadband Network Device, >> 02:50:f3:00:00:00 >> [ 22.395891] option 1-1.2:1.0: GSM modem (1-port) converter detected >> [ 22.399676] usb 1-1.2: GSM modem (1-port) converter now attached to >> ttyUSB0 >> [ 22.399997] option 1-1.2:1.3: GSM modem (1-port) converter detected >> [ 22.400557] usb 1-1.2: GSM modem (1-port) converter now attached to >> ttyUSB1 >> [ 22.400639] option 1-1.2:1.4: GSM modem (1-port) converter detected >> [ 22.401041] usb 1-1.2: GSM modem (1-port) converter now attached to >> ttyUSB2 >> >> Not sure how to usbreset - all three /dev/ttyUSB[0-2] ? >> >> $ sudo ./usbreset $DEVFN >> Usage: usbreset device-filename >> >> If you need more informations if my attached linux-config, >> dmesg-output and 'lsusb -vvv' outputs don't help, please let me know. > > sudo ./usbreset /dev/bus/usb/001/005 > > 001 and 005 are the Bus and Device numbers from the lsusb output. >
Thanks, Alan. I will look and test this (or adapt your) line as soon as I get in front of my machine. I have seen that the corresponding "usb-port" provides a usb3-hub and a usb2-hub, so I think I have to reset both? Are those hubs independent? I will re-check my outputs which I had sent here. Can you add an example-line to the "help-text" when invoking usbreset with no (or wrong) device-filename argument? Thanks in advance. - Sedat Dilek - -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
