On Jun 17 2016 or thereabouts, Heiner Kallweit wrote:
> The USB LED driver exposes a undocumented sysfs interface and doesn't
> use the standard kernel LED subsystem. It supports three devices:
>
> Delcom Visual Signal Indicator
> The driver supports generation 1 of the device only which was
> manufactured until 2008. Remove support for this device completely.
>
> Riso Kagaku RGB LED + Dream Cheeky Webmail Notifier
> These devices are HID compliant and are supported by a new USB LED
> driver under drivers/hid utilizing the kernel LED subsystem.
>
> So let's remove the old USB LED driver.
>
> Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
> Acked-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
Acked-by: Benjamin Tissoires <benjamin.tissoi...@redhat.com>
Cheers,
Benjamin
> ---
> drivers/usb/misc/Kconfig | 9 --
> drivers/usb/misc/Makefile | 1 -
> drivers/usb/misc/usbled.c | 273
> ----------------------------------------------
> 3 files changed, 283 deletions(-)
> delete mode 100644 drivers/usb/misc/usbled.c
>
> diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> index f7a7fc2..e9c5458 100644
> --- a/drivers/usb/misc/Kconfig
> +++ b/drivers/usb/misc/Kconfig
> @@ -79,15 +79,6 @@ config USB_LCD
> To compile this driver as a module, choose M here: the
> module will be called usblcd.
>
> -config USB_LED
> - tristate "USB LED driver support"
> - help
> - Say Y here if you want to connect an USBLED device to your
> - computer's USB port.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called usbled.
> -
> config USB_CYPRESS_CY7C63
> tristate "Cypress CY7C63xxx USB driver support"
> help
> diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
> index 45fd4ac..4bc755b 100644
> --- a/drivers/usb/misc/Makefile
> +++ b/drivers/usb/misc/Makefile
> @@ -15,7 +15,6 @@ obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
> obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
> obj-$(CONFIG_USB_LCD) += usblcd.o
> obj-$(CONFIG_USB_LD) += ldusb.o
> -obj-$(CONFIG_USB_LED) += usbled.o
> obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
> obj-$(CONFIG_USB_RIO500) += rio500.o
> obj-$(CONFIG_USB_TEST) += usbtest.o
> diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
> deleted file mode 100644
> index bdef0d6..0000000
> --- a/drivers/usb/misc/usbled.c
> +++ /dev/null
> @@ -1,273 +0,0 @@
> -/*
> - * USB LED driver
> - *
> - * Copyright (C) 2004 Greg Kroah-Hartman (g...@kroah.com)
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation, version 2.
> - *
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/slab.h>
> -#include <linux/module.h>
> -#include <linux/usb.h>
> -
> -
> -#define DRIVER_AUTHOR "Greg Kroah-Hartman, g...@kroah.com"
> -#define DRIVER_DESC "USB LED Driver"
> -
> -enum led_type {
> - DELCOM_VISUAL_SIGNAL_INDICATOR,
> - DREAM_CHEEKY_WEBMAIL_NOTIFIER,
> - RISO_KAGAKU_LED
> -};
> -
> -/* the Webmail LED made by RISO KAGAKU CORP. decodes a color index
> - internally, we want to keep the red+green+blue sysfs api, so we decode
> - from 1-bit RGB to the riso kagaku color index according to this table...
> */
> -
> -static unsigned const char riso_kagaku_tbl[] = {
> -/* R+2G+4B -> riso kagaku color index */
> - [0] = 0, /* black */
> - [1] = 2, /* red */
> - [2] = 1, /* green */
> - [3] = 5, /* yellow */
> - [4] = 3, /* blue */
> - [5] = 6, /* magenta */
> - [6] = 4, /* cyan */
> - [7] = 7 /* white */
> -};
> -
> -#define RISO_KAGAKU_IX(r,g,b) riso_kagaku_tbl[((r)?1:0)+((g)?2:0)+((b)?4:0)]
> -
> -/* table of devices that work with this driver */
> -static const struct usb_device_id id_table[] = {
> - { USB_DEVICE(0x0fc5, 0x1223),
> - .driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
> - { USB_DEVICE(0x1d34, 0x0004),
> - .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
> - { USB_DEVICE(0x1d34, 0x000a),
> - .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
> - { USB_DEVICE(0x1294, 0x1320),
> - .driver_info = RISO_KAGAKU_LED },
> - { },
> -};
> -MODULE_DEVICE_TABLE(usb, id_table);
> -
> -struct usb_led {
> - struct usb_device *udev;
> - unsigned char blue;
> - unsigned char red;
> - unsigned char green;
> - enum led_type type;
> -};
> -
> -static void change_color(struct usb_led *led)
> -{
> - int retval = 0;
> - unsigned char *buffer;
> - int actlength;
> -
> - buffer = kmalloc(8, GFP_KERNEL);
> - if (!buffer) {
> - dev_err(&led->udev->dev, "out of memory\n");
> - return;
> - }
> -
> - switch (led->type) {
> - case DELCOM_VISUAL_SIGNAL_INDICATOR: {
> - unsigned char color = 0x07;
> -
> - if (led->blue)
> - color &= ~0x04;
> - if (led->red)
> - color &= ~0x02;
> - if (led->green)
> - color &= ~0x01;
> - dev_dbg(&led->udev->dev,
> - "blue = %d, red = %d, green = %d, color = %.2x\n",
> - led->blue, led->red, led->green, color);
> -
> - retval = usb_control_msg(led->udev,
> - usb_sndctrlpipe(led->udev, 0),
> - 0x12,
> - 0xc8,
> - (0x02 * 0x100) + 0x0a,
> - (0x00 * 0x100) + color,
> - buffer,
> - 8,
> - 2000);
> - break;
> - }
> -
> - case DREAM_CHEEKY_WEBMAIL_NOTIFIER:
> - dev_dbg(&led->udev->dev,
> - "red = %d, green = %d, blue = %d\n",
> - led->red, led->green, led->blue);
> -
> - buffer[0] = led->red;
> - buffer[1] = led->green;
> - buffer[2] = led->blue;
> - buffer[3] = buffer[4] = buffer[5] = 0;
> - buffer[6] = 0x1a;
> - buffer[7] = 0x05;
> -
> - retval = usb_control_msg(led->udev,
> - usb_sndctrlpipe(led->udev, 0),
> - 0x09,
> - 0x21,
> - 0x200,
> - 0,
> - buffer,
> - 8,
> - 2000);
> - break;
> -
> - case RISO_KAGAKU_LED:
> - buffer[0] = RISO_KAGAKU_IX(led->red, led->green, led->blue);
> - buffer[1] = 0;
> - buffer[2] = 0;
> - buffer[3] = 0;
> - buffer[4] = 0;
> -
> - retval = usb_interrupt_msg(led->udev,
> - usb_sndctrlpipe(led->udev, 2),
> - buffer, 5, &actlength, 1000 /*ms timeout*/);
> - break;
> -
> - default:
> - dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
> - }
> -
> - if (retval)
> - dev_dbg(&led->udev->dev, "retval = %d\n", retval);
> - kfree(buffer);
> -}
> -
> -#define show_set(value) \
> -static ssize_t show_##value(struct device *dev, struct device_attribute
> *attr,\
> - char *buf) \
> -{ \
> - struct usb_interface *intf = to_usb_interface(dev); \
> - struct usb_led *led = usb_get_intfdata(intf); \
> - \
> - return sprintf(buf, "%d\n", led->value); \
> -} \
> -static ssize_t set_##value(struct device *dev, struct device_attribute
> *attr,\
> - const char *buf, size_t count) \
> -{ \
> - struct usb_interface *intf = to_usb_interface(dev); \
> - struct usb_led *led = usb_get_intfdata(intf); \
> - int temp = simple_strtoul(buf, NULL, 10); \
> - \
> - led->value = temp; \
> - change_color(led); \
> - return count; \
> -} \
> -static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
> -show_set(blue);
> -show_set(red);
> -show_set(green);
> -
> -static int led_probe(struct usb_interface *interface,
> - const struct usb_device_id *id)
> -{
> - struct usb_device *udev = interface_to_usbdev(interface);
> - struct usb_led *dev = NULL;
> - int retval = -ENOMEM;
> -
> - dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
> - if (dev == NULL) {
> - dev_err(&interface->dev, "out of memory\n");
> - goto error_mem;
> - }
> -
> - dev->udev = usb_get_dev(udev);
> - dev->type = id->driver_info;
> -
> - usb_set_intfdata(interface, dev);
> -
> - retval = device_create_file(&interface->dev, &dev_attr_blue);
> - if (retval)
> - goto error;
> - retval = device_create_file(&interface->dev, &dev_attr_red);
> - if (retval)
> - goto error;
> - retval = device_create_file(&interface->dev, &dev_attr_green);
> - if (retval)
> - goto error;
> -
> - if (dev->type == DREAM_CHEEKY_WEBMAIL_NOTIFIER) {
> - unsigned char *enable;
> -
> - enable = kmemdup("\x1f\x02\0\x5f\0\0\x1a\x03", 8, GFP_KERNEL);
> - if (!enable) {
> - dev_err(&interface->dev, "out of memory\n");
> - retval = -ENOMEM;
> - goto error;
> - }
> -
> - retval = usb_control_msg(udev,
> - usb_sndctrlpipe(udev, 0),
> - 0x09,
> - 0x21,
> - 0x200,
> - 0,
> - enable,
> - 8,
> - 2000);
> -
> - kfree(enable);
> - if (retval != 8)
> - goto error;
> - }
> -
> - dev_info(&interface->dev, "USB LED device now attached\n");
> - return 0;
> -
> -error:
> - device_remove_file(&interface->dev, &dev_attr_blue);
> - device_remove_file(&interface->dev, &dev_attr_red);
> - device_remove_file(&interface->dev, &dev_attr_green);
> - usb_set_intfdata(interface, NULL);
> - usb_put_dev(dev->udev);
> - kfree(dev);
> -error_mem:
> - return retval;
> -}
> -
> -static void led_disconnect(struct usb_interface *interface)
> -{
> - struct usb_led *dev;
> -
> - dev = usb_get_intfdata(interface);
> -
> - device_remove_file(&interface->dev, &dev_attr_blue);
> - device_remove_file(&interface->dev, &dev_attr_red);
> - device_remove_file(&interface->dev, &dev_attr_green);
> -
> - /* first remove the files, then set the pointer to NULL */
> - usb_set_intfdata(interface, NULL);
> -
> - usb_put_dev(dev->udev);
> -
> - kfree(dev);
> -
> - dev_info(&interface->dev, "USB LED now disconnected\n");
> -}
> -
> -static struct usb_driver led_driver = {
> - .name = "usbled",
> - .probe = led_probe,
> - .disconnect = led_disconnect,
> - .id_table = id_table,
> -};
> -
> -module_usb_driver(led_driver);
> -
> -MODULE_AUTHOR(DRIVER_AUTHOR);
> -MODULE_DESCRIPTION(DRIVER_DESC);
> -MODULE_LICENSE("GPL");
> --
> 2.8.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
