Remove the event ring related checks in inc_enq() Host hardware is the producer of events on the event ring, driver will not queue anything, or call inc_enq() for the event ring.
Signed-off-by: Mathias Nyman <[email protected]> --- drivers/usb/host/xhci-ring.c | 64 +++++++++++++++++++------------------------- 1 file changed, 28 insertions(+), 36 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 142e53e..c13b842 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -199,50 +199,42 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN; /* If this is not event ring, there is one less usable TRB */ - if (ring->type != TYPE_EVENT && - !last_trb(xhci, ring, ring->enq_seg, ring->enqueue)) + if (!last_trb(xhci, ring, ring->enq_seg, ring->enqueue)) ring->num_trbs_free--; next = ++(ring->enqueue); ring->enq_updates++; - /* Update the dequeue pointer further if that was a link TRB or we're at - * the end of an event ring segment (which doesn't have link TRBS) - */ + /* Update the dequeue pointer further if that was a link TRB */ while (last_trb(xhci, ring, ring->enq_seg, next)) { - if (ring->type != TYPE_EVENT) { - /* - * If the caller doesn't plan on enqueueing more - * TDs before ringing the doorbell, then we - * don't want to give the link TRB to the - * hardware just yet. We'll give the link TRB - * back in prepare_ring() just before we enqueue - * the TD at the top of the ring. - */ - if (!chain && !more_trbs_coming) - break; - /* If we're not dealing with 0.95 hardware or - * isoc rings on AMD 0.96 host, - * carry over the chain bit of the previous TRB - * (which may mean the chain bit is cleared). - */ - if (!(ring->type == TYPE_ISOC && - (xhci->quirks & XHCI_AMD_0x96_HOST)) - && !xhci_link_trb_quirk(xhci)) { - next->link.control &= - cpu_to_le32(~TRB_CHAIN); - next->link.control |= - cpu_to_le32(chain); - } - /* Give this link TRB to the hardware */ - wmb(); - next->link.control ^= cpu_to_le32(TRB_CYCLE); + /* + * If the caller doesn't plan on enqueueing more TDs before + * ringing the doorbell, then we don't want to give the link TRB + * to the hardware just yet. We'll give the link TRB back in + * prepare_ring() just before we enqueue the TD at the top of + * the ring. + */ + if (!chain && !more_trbs_coming) + break; - /* Toggle the cycle bit after the last ring segment. */ - if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { - ring->cycle_state ^= 1; - } + /* If we're not dealing with 0.95 hardware or isoc rings on + * AMD 0.96 host, carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!(ring->type == TYPE_ISOC && + (xhci->quirks & XHCI_AMD_0x96_HOST)) && + !xhci_link_trb_quirk(xhci)) { + next->link.control &= cpu_to_le32(~TRB_CHAIN); + next->link.control |= cpu_to_le32(chain); } + /* Give this link TRB to the hardware */ + wmb(); + next->link.control ^= cpu_to_le32(TRB_CYCLE); + + /* Toggle the cycle bit after the last ring segment. */ + if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) + ring->cycle_state ^= 1; + ring->enq_seg = ring->enq_seg->next; ring->enqueue = ring->enq_seg->trbs; next = ring->enqueue; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
