Since R-Car Gen3 SoC has the USB-DMAC, this driver should set
dparam->has_usb_dmac to 1. Otherwise, behavior of this driver and
the usb-dmac driver will be mismatch, then sometimes receiving data will
be corrupt.
Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control")
Cc: <[email protected]> # v4.5+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
---
drivers/usb/renesas_usbhs/common.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/renesas_usbhs/common.c
b/drivers/usb/renesas_usbhs/common.c
index 8fbbc2d..ac67bab 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -514,7 +514,8 @@ static struct renesas_usbhs_platform_info
*usbhs_parse_dt(struct device *dev)
if (gpio > 0)
dparam->enable_gpio = gpio;
- if (dparam->type == USBHS_TYPE_RCAR_GEN2)
+ if (dparam->type == USBHS_TYPE_RCAR_GEN2 ||
+ dparam->type == USBHS_TYPE_RCAR_GEN3)
dparam->has_usb_dmac = 1;
return info;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
