On Tue, Aug 16, 2016 at 04:40:43PM +0300, Binyamin Sharet wrote: > Hi, > > We are using Umap2 to scan USB hosts for vendor-specific device support. > e.g. whether appropriate drivers are loaded when a device with a specific > VID/PID is inserted. > > In our configuration, we connect multiple times to the host, each time > providing different VID/PID in the device descriptor, and then we provide > a single configuration with a single interface that has multiple (10) > endpoints of different types. > > Umap2 can be downloaded from https://github.com/nccgroup/umap2, > and requires either a Facedancer board or a beaglebone black with a > modified gadgetfs module (source and instructions in umap2 repository) to > be used. > > During this scan we have found multiple issues in the kernel. > Some issues cause the the USB stack to hang, while others cause an oops. > Some of the issues seem similar and might originate from the same source, > however, due to my lack of knowledge in the Linux USB subsystem, I did not > perform an in-depth analysis of the root causes. > > In total, there are 11 issues: 2 hangs, 8 NULL pointer dereference and > 1 oops caused by kernel unable to handle paging address. > > To keep some order, I will send a separate mail for each issue, titled > '[Umap2][x/11][$VID:$PID] $result'.
Another minor nit, try a leading 0 on your 1-9 emails so they sort properly :) greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
