From: Aleksandr Makarov <[email protected]> USB: serial: option: add WeTelecom WM-D200
Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Aleksandr Makarov <[email protected]> --- --- drivers/usb/serial/option.c.orig 2016-08-19 15:15:17.173146316 +0300 +++ drivers/usb/serial/option.c 2016-08-19 15:16:04.241147738 +0300 @@ -519,6 +519,10 @@ static void option_instat_callback(struc #define VIATELECOM_VENDOR_ID 0x15eb #define VIATELECOM_PRODUCT_CDS7 0x0001 +/* WeTelecom products */ +#define WETELECOM_VENDOR_ID 0x22de +#define WETELECOM_PRODUCT_WMD200 0x6801 + struct option_blacklist_info { /* bitmask of interface numbers blacklisted for send_setup */ const unsigned long sendsetup; @@ -1969,6 +1973,7 @@ static const struct usb_device_id option { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); 20.08.2016 13:05, Greg KH пишет: > On Sat, Aug 20, 2016 at 11:19:37AM +0300, Aleksandr Makarov wrote: >> From: Aleksandr Makarov <[email protected]> >> >> USB: serial: option: add WeTelecom WM-D200 >> >> Add support for WeTelecom WM-D200. >> >> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 >> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 >> P: Vendor=22de ProdID=6801 Rev=00.00 >> S: Manufacturer=WeTelecom Incorporated >> S: Product=WeTelecom Mobile Products >> C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA >> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >> I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage >> >> Signed-off-by: Aleksandr Makarov <[email protected]> >> --- >> --- linux/drivers/usb/serial/option.c.orig 2016-08-19 15:15:17.173146316 >> +0300 >> +++ linux/drivers/usb/serial/option.c 2016-08-19 15:16:04.241147738 >> +0300 >> @@ -519,6 +519,10 @@ static void option_instat_callback(struc >> #define VIATELECOM_VENDOR_ID 0x15eb >> #define VIATELECOM_PRODUCT_CDS7 0x0001 >> >> +/* WeTelecom products */ >> +#define WETELECOM_VENDOR_ID 0x22de >> +#define WETELECOM_PRODUCT_WMD200 0x6801 >> + >> struct option_blacklist_info { >> /* bitmask of interface numbers blacklisted for send_setup */ >> const unsigned long sendsetup; >> @@ -1969,6 +1973,7 @@ static const struct usb_device_id option >> { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, >> /* OLICARD300 - MT6225 */ >> { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, >> { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, >> + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, >> WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, >> { } /* Terminating entry */ >> }; >> MODULE_DEVICE_TABLE(usb, option_ids); > > The patch is line-wrapped and can't be applied :( > > Can you fix that up and resend please? > > thanks, > > greg k-h > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
