Hi John,
Am Mittwoch, 24. August 2016, 16:20:01 schrieb John Youn:
> When a force mode bit is set and the IDDIG debounce filter is enabled,
> there is a delay for the forced mode to take effect. This delay is due
> to the IDDIG debounce filter and is variable depending on the platform's
> PHY clock speed. To account for this delay we can poll for the expected
> mode.
>
> On a clear force mode, since we don't know what mode to poll for, delay
> for a fixed 50 ms. This is the maximum delay based on the slowest PHY
> clock speed.
>
> Signed-off-by: John Youn <[email protected]>
starting with this patch, I see debounce-failed messages:
[ 7.934100] usb usb2-port1: connect-debounce failed
on my rk3188. Port is in host-mode and I'll try to investigate further.
One more thing below.
> ---
> drivers/usb/dwc2/core.c | 32 ++++++++++++++------------------
> 1 file changed, 14 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index bb903e2..caad6121 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -397,9 +397,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg)
> * Checks are done in this function to determine whether doing a force
> * would be valid or not.
> *
> - * If a force is done, it requires a 25ms delay to take effect.
> - *
> - * Returns true if the mode was forced.
> + * If a force is done, it requires a IDDIG debounce filter delay if
> + * the filter is configured and enabled. We poll the current mode of
> + * the controller to account for this delay.
> */
> static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
> {
> @@ -434,12 +434,17 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg,
> bool host) gusbcfg |= set;
> dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
>
> - msleep(25);
> - return true;
> + dwc2_wait_for_mode(hsotg, host, 50);
missing a return value and thus resulting in
../drivers/usb/dwc2/core.c: In function ‘dwc2_force_mode’:
../drivers/usb/dwc2/core.c:438:1: warning: control reaches end of non-void
function [-Wreturn-type]
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
