On Tue, 20 Sep 2016, Carsten Mattner wrote:
> On Tue, Sep 20, 2016 at 2:36 PM, Oliver Neukum <[email protected]> wrote:
> > On Tue, 2016-09-20 at 14:11 +0200, Carsten Mattner wrote:
> >> 4.8-rc5 was fine, but 4.8-rc6 and 4.8-rc7 on a Lenovo Thinkpad x220 report
> >> this
> >> warning or error (cannot tell) anytime a USB mass storage device is
> >> inserted
> >> into a usb port (2.0 or 3.0):
> >>
> >> runtime PM trying to activate child device host6 but parent
> >> (2-1.2:1.0) is not active
> >
> > I see no obvious culprit. Could you bisect?
>
> I need the machine for so cannot do too many compile and reboot
> cycles, but I've confirmed that the error message is triggered back
> in 4.8-rc2.
>
> No such thing in 4.7.4 and I'm now back in lts-4.7.4 to get work done.
I suspect the problem has been there all along, but it simply wasn't
reported until commit 71723f95463d ("PM / runtime: print error when
activating a child to unactive parent") was merged in 4.8-rc1.
Does this patch get rid of the error message?
Alan Stern
Index: usb-4.x/drivers/usb/storage/usb.c
===================================================================
--- usb-4.x.orig/drivers/usb/storage/usb.c
+++ usb-4.x/drivers/usb/storage/usb.c
@@ -1070,17 +1070,18 @@ int usb_stor_probe2(struct us_data *us)
result = usb_stor_acquire_resources(us);
if (result)
goto BadDevice;
+
+ usb_autopm_get_interface_no_resume(us->pusb_intf);
snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
dev_name(&us->pusb_intf->dev));
result = scsi_add_host(us_to_host(us), dev);
if (result) {
dev_warn(dev,
"Unable to add the scsi host\n");
- goto BadDevice;
+ goto AddHostFailed;
}
/* Submit the delayed_work for SCSI-device scanning */
- usb_autopm_get_interface_no_resume(us->pusb_intf);
set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
if (delay_use > 0)
@@ -1090,7 +1091,9 @@ int usb_stor_probe2(struct us_data *us)
return 0;
/* We come here if there are any problems */
-BadDevice:
+ AddHostFailed:
+ usb_autopm_put_interface_no_suspend(us->pusb_intf);
+ BadDevice:
usb_stor_dbg(us, "storage_probe() failed\n");
release_everything(us);
return result;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
