Hi, 在 2016/9/27 18:01, Felipe Balbi 写道: > > Hi, > > Chen Yu <cheny...@huawei.com> writes: >> Hi All, >> >> I'm working on Hikey board based around the HiSilicon Kirin 620, with >> linaro kernel version 4.8.rc1 and I get below BUG error while >> extracting USB cable from PC. > > which peripheral controller does this one have? Is it dwc3? > > I'm very interested in knowing about throughtput of adb push with dwc3 + f_fs. >
Sorry for a delay, the peripheral controller on HiSilicon Kirin 620 is dwc2. > Also, do you know if adb can run outside of android environment? I've > been looking for a proper functionfs user for quite some time now :-( > I'm not sure if adb can run outside of android environment, there are some requirements: 1.adbd can run outside of android environment. 2.Do initialization for configfs and f_fs as android. There is an example on Hikey: https://github.com/96boards-hikey/android_device_linaro_hikey/blob/android-5.0/init.hikey.rc line 46-65 and line 161-163. Hope this can help to you! >> The funtion using f_fs is adb and usb_gadget_unregister_driver will be >> called after extracting USB cable from PC. >> >> [ 89.456512s][pid:1,cpu1,init]BUG: scheduling while atomic: >> init/1/0x00000002 >> [ 89.456573s]Modules linked in: >> [ 89.456604s]Preemption disabled at:[<ffffffc0006a6dc0>] >> composite_disconnect+0x30/0xac >> [ 89.456665s][pid:1,cpu1,init]TGID: 1 Comm: init >> [ 89.456695s][pid:1,cpu1,init]Call trace: >> [ 89.456726s][pid:1,cpu1,init][<ffffffc00008a5e0>] dump_backtrace+0x0/0x15c >> [ 89.456756s][pid:1,cpu1,init][<ffffffc00008a75c>] show_stack+0x20/0x28 >> [ 89.456756s][pid:1,cpu1,init][<ffffffc001153714>] dump_stack+0x84/0xa8 >> [ 89.456787s][pid:1,cpu1,init][<ffffffc0000cfc5c>] __schedule_bug+0x88/0xdc >> [ 89.456817s][pid:1,cpu1,init][<ffffffc00115c4f0>] __schedule+0x714/0x854 >> [ 89.456817s][pid:1,cpu1,init][<ffffffc00115c678>] schedule+0x48/0xa4 >> [ 89.456817s][pid:1,cpu1,init][<ffffffc00115cbf0>] >> schedule_preempt_disabled+0x4c/0xf4 >> [ 89.456848s][pid:1,cpu1,init][<ffffffc00115ea90>] >> __mutex_lock_slowpath+0xbc/0x1a4 >> [ 89.456878s][pid:1,cpu1,init][<ffffffc00115ebd8>] mutex_lock+0x60/0x64 >> [ 89.456878s][pid:1,cpu1,init][<ffffffc0006beb00>] >> ffs_func_eps_disable.isra.17+0x54/0x114 >> [ 89.456909s][pid:1,cpu1,init][<ffffffc0006c05a4>] >> ffs_func_disable+0x30/0xa0 >> [ 89.456909s][pid:1,cpu1,init][<ffffffc0006a6c4c>] >> reset_config.isra.8+0x44/0x78 >> [ 89.456939s][pid:1,cpu1,init][<ffffffc0006a6dd8>] >> composite_disconnect+0x48/0xac >> [ 89.456939s][pid:1,cpu1,init][<ffffffc0006aafd4>] >> android_disconnect+0x48/0x54 >> [ 89.456970s][pid:1,cpu1,init][<ffffffc0006ad9d0>] >> usb_gadget_remove_driver+0x58/0xa0 >> [ 89.456970s][pid:1,cpu1,init][<ffffffc0006ada90>] >> usb_gadget_unregister_driver+0x78/0xc4 >> >> I checked the codes of composite_disconnect and found >> spin_lock_irqsave called before reset_config in which >> ffs_func_eps_disable is called. >> >> void composite_disconnect(struct usb_gadget *gadget) >> { >> struct usb_composite_dev *cdev = get_gadget_data(gadget); >> unsigned long flags; >> >> /* REVISIT: should we have config and device level >> * disconnect callbacks? >> */ >> spin_lock_irqsave(&cdev->lock, flags); >> if (cdev->config) >> reset_config(cdev); >> if (cdev->driver->disconnect) >> cdev->driver->disconnect(cdev); >> spin_unlock_irqrestore(&cdev->lock, flags); >> } >> >> static void ffs_func_eps_disable(struct ffs_function *func) >> { >> struct ffs_ep *ep = func->eps; >> struct ffs_epfile *epfile = func->ffs->epfiles; >> unsigned count = func->ffs->eps_count; >> unsigned long flags; >> >> do { >> if (epfile) >> mutex_lock(&epfile->mutex); >> spin_lock_irqsave(&func->ffs->eps_lock, flags); >> /* pending requests get nuked */ >> if (likely(ep->ep)) >> usb_ep_disable(ep->ep); >> ++ep; >> spin_unlock_irqrestore(&func->ffs->eps_lock, flags); >> >> if (epfile) { >> epfile->ep = NULL; >> kfree(epfile->read_buffer); >> epfile->read_buffer = NULL; >> mutex_unlock(&epfile->mutex); >> ++epfile; >> } >> } while (--count); >> } >> >> Should the epfile->read_buffer be cleared another place and the >> mutex_lock can be removed in ffs_func_eps_disable? > > You are correct. There's a bug there. Can you try to propose a fix for > it? > > thanks > I will try to fix it, but I'm engaged in other tasks and can not spend much time on it. Do you have any suggestions about how to fix it? thanks -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
