On 2016년 10월 01일 00:49, Kevin Hilman wrote:
> Brian Kim <[email protected]> writes:
>
>> Enable both gxbb USB controller and add a 5V regulator for the OTG port
>> VBUS
>>
>> Signed-off-by: Brian Kim <[email protected]>
> Thanks for the patch.
>
> In the future, please state what branch the patch should apply to when
> not using mainline. Because of the sd_emmc nodes in your patch, I could
> tell that it was based on my integ branch so was able to figure it out,
> but it's very helpful to maintainers if you state the branch and/or any
> dependencies explicity.
Okay, I will do next time.
I guessed the branch is your latest working branch by the commit logs.
>
>> ---
>> .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 29
>> ++++++++++++++++++++++
>> 1 file changed, 29 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> index 8d89edc..997c671 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> @@ -64,6 +64,18 @@
>> reg = <0x0 0x0 0x0 0x80000000>;
>> };
>>
>> + usb_pwr: regulator-usb-pwrs {
> minor nit: since this is specific to the OTG part, can you call this
> usb_otg_pwr? ...
Sure.
>
>> + compatible = "regulator-fixed";
>> +
>> + regulator-name = "USB_PWR";
> ... and rename this also?
Yes, I will change the name to "USB_OTG_PWR".
>
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> +
>> + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + };
>> +
> Thanks
>
> Kevin
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
