On 13 October 2016 at 19:22, Felipe Balbi <ba...@kernel.org> wrote:
> Hi,
> Janusz Dziedzic <janusz.dzied...@tieto.com> writes:
>>>> Baolin Wang <baolin.w...@linaro.org> writes:
>>>>>>>>>>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>>>>>>>>>>> index 1783406..ca2ae5b 100644
>>>>>>>>>>> --- a/drivers/usb/dwc3/gadget.c
>>>>>>>>>>> +++ b/drivers/usb/dwc3/gadget.c
>>>>>>>>>>> @@ -241,6 +241,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep 
>>>>>>>>>>> *dep, unsigned cmd,
>>>>>>>>>>>       int                     susphy = false;
>>>>>>>>>>>       int                     ret = -EINVAL;
>>>>>>>>>>> +     if (!dwc->pullups_connected)
>>>>>>>>>>> +             return -ESHUTDOWN;
>>>>>>>>>>> +
>>>>>>>> you skip trace_dwc3_gadget_ep_cmd()
>>>>>>> Yes, we did not need trace here since we did not send out the command.
>>>>>> What in such case: enumeration will not work and this will be because
>>>>>> this ESHUTDOWN or wrong pullups_connected usage. Without a trace you
>>>>>> will not know where the problem is.
>>>>>> In my opinion this trace could be useful.
>>>>> We have returned the '-ESHUTDOWN' error number for user to know what
>>>>> happened.
>>>> No, this is actually not good and Janusz has a very valid point
>>>> here. When we're debugging something in dwc3, we want to rely on
>>>> tracepoints to tell us what's going on. I don't want to have to add more
>>>> debugging messages to print out that ESHUTDOWN error just so I can
>>>> figure out what's going on. You should be patching this in a way that
>>>> the tracepoint is still printed out properly.
>>> Fine. Will fix this in next version.
>> BTW, did you test this patch with device mode?
>> Seems in my setup this fail - DWC3_DEPCMD_SETEPCONFIG for ep0out and
>> gadget_start() failed (enumeration fail).
>> Don't we need to queue ep0 cmds before pullup?
> Baolin, it's clear to me that you're not testing any of the patches
> you're sending me. I just reviewed this part of the code and we _do_
> indeed enable the control pipe before connecting pullups and that *must*
> be done this way, otherwise we won't be able to receive first Setup
> packet from host.

I am very sorry for this mistake. Since the original patch is adding
some 'pullups_connected' check in other places to avoid queuing
requests, but you suggested me this only affected the endpoint command
transfer, so I just follow your advice without one clear testing. I
really sorry for that. Please ignore this patch and I promise I will
test it enough before sending out any patches. Sorry again for

> How have you tested this? Against which tree?
> --
> balbi

Best Regards
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to