On Mon, 17 Oct 2016, Ulf Hansson wrote: > On 13 October 2016 at 13:37, Ulf Hansson <ulf.hans...@linaro.org> wrote: > > The rtsx_usb_sdmmc (mmc/sd) and rtsx_usb_ms (memstick) devices are > > interfacing > > an rtsx_usb device (managed by an mfd driver) while communicating with the > > cards. The mmc/sd and memstick devices are children of the usb device. > > > > Issues has been reported  for rtsx, which have been investigated, > > discussed, > > fixed, tested, etc, particularly when using mmc/sd cards. During the > > investigation, some changes was proposed and tested successfully. In this > > series I have picked up these changes and created some proper patches with > > change-logs. > > > > It turned out that most of the problems was related to the runtime PM > > deployment in the memstick and the mmc/sd driver, which are fixed in this > > series. > > > > A couple of more issues were also discussed , which needs to be fixed as > > well. Although they are out of scope for this series, so we will have to > > look > > into those at a later point. Here's a brief summary of these leftovers: > > > > *) > > It seems reasonable to turn off autosuspend for usb devices and instead > > rely on > > the usb device's children to deal with autosuspend. The reason is simply > > that > > the children has better knowledge of when using autosuspend makes sense. > > > > **) > > Polling card detect mode is used both for mmc/sd and memstick. Because of > > the > > lack of synchronization between the polling attempts for these subsystems, > > the > > usb device may be powered on for unnecessary long intervals, thus we are > > wasting power. > > > > Besides the above changes, I folded in a change in the mmc core which > > improves > > the behaviour for mmc hosts using MMC_CAP2_NO_PRESCAN_POWERUP, which is the > > case for the rtsx_usb_sdmmc driver. This change should improve the boot > > time > > with ~100ms per rtsx_usb_sdmmc device. > > > > Finally, as I couldn't find an active maintainer for the memstick > > subsystem/driver and because the author of the drivers can be reached, I > > volunteer to take this all through my mmc tree. Please tell me if that is > > problem to any of you. > > > >  > > https://www.spinics.net/lists/linux-usb/msg146998.html > >  > > https://www.spinics.net/lists/linux-mmc/msg39235.html > > > > > > Alan Stern (1): > > memstick: rtsx_usb_ms: Runtime resume the device when polling for > > cards > > > > Ulf Hansson (5): > > mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when > > unused > > mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led > > memstick: rtsx_usb_ms: Manage runtime PM when accessing the device > > mmc: rtsx_usb_sdmmc: Enable runtime PM autosuspend > > mmc: core: Don't power off the card when starting the host > > > > drivers/memstick/host/rtsx_usb_ms.c | 6 ++++++ > > drivers/mmc/core/core.c | 9 ++++----- > > drivers/mmc/host/rtsx_usb_sdmmc.c | 10 +++++----- > > 3 files changed, 15 insertions(+), 10 deletions(-) > > > > -- > > 1.9.1 > > > > Patch 1->4 applied for fixes. Holding patch 5->6 for a while, as they > are intended for next!
Thanks for taking care of all these updates. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html