>From: Felipe Balbi [mailto:felipe.ba...@linux.intel.com]
>
>
>Hi,
Hello Felipe,
>
>Sriram Dash <sriram.d...@nxp.com> writes:
>> From: Arnd Bergmann <a...@arndb.de>
>>
>> The dma ops for dwc3 devices are not set properly. So, use a physical
>> device sysdev, which will be inherited from parent, to set the
>> hardware / firmware parameters like dma.
>>
>> Signed-off-by: Arnd Bergmann <a...@arndb.de>
>> Signed-off-by: Sriram Dash <sriram.d...@nxp.com>
>> ---
>> Changes in v3:
>> - No update
>>
>> Changes in v2:
>> - integrate dwc3 driver changes together
>>
>> drivers/usb/dwc3/core.c | 28 +++++++++++++++-------------
>> drivers/usb/dwc3/core.h | 1 +
>> drivers/usb/dwc3/ep0.c | 8 ++++----
>> drivers/usb/dwc3/gadget.c | 37 +++++++++++++++++++------------------
>> drivers/usb/dwc3/host.c | 12 ++++--------
>> 5 files changed, 43 insertions(+), 43 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
>> 7287a76..0af0dc0 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -25,6 +25,7 @@
>> #include <linux/slab.h>
>> #include <linux/spinlock.h>
>> #include <linux/platform_device.h>
>> +#include <linux/pci.h>
>
>I'd prefer to add a device property instead of checking for PCI bus type.
>
>> @@ -943,6 +944,13 @@ static int dwc3_probe(struct platform_device *pdev)
>> dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
>> dwc->mem = mem;
>> dwc->dev = dev;
>> +#ifdef CONFIG_PCI
>> + /* TODO: or some other way of detecting this? */
>> + if (dwc->dev->parent && dwc->dev->parent->bus == &pci_bus_type)
>> + dwc->sysdev = dwc->dev->parent;
>> + else
>> +#endif
>
>IOW:
>
> dwc->sysdev_is_parent = device_property_read_bool(dev,
> "linux,sysdev_is_parent");
>
>[...]
>
> if (dwc->sysdev_is_parent)
> dwc->sysdev = dwc->dev->parent;
> else
> dwc->sysdev = dwc->dev;
>
I am with you in the fact that the core should not worry about pci.
This change you proposed is also appealing. But, if we are going with
this solution, all the clients which are using dwc3 pci have to
mention the dts property "linux,sysdev_is_parent". This will be requiring
a lot of testing and proper changes from the dts, or it might break the
functionality for dwc3 pci clients. So, IMO, we could postpone this change
and try it out in future.
>> @@ -112,9 +108,9 @@ int dwc3_host_init(struct dwc3 *dwc)
>> return 0;
>> err2:
>> phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
>> - dev_name(&xhci->dev));
>> + dev_name(dwc->dev));
>> phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> - dev_name(&xhci->dev));
>> + dev_name(dwc->dev));
>> err1:
>> platform_device_put(xhci);
>> return ret;
>> @@ -123,8 +119,8 @@ int dwc3_host_init(struct dwc3 *dwc) void
>> dwc3_host_exit(struct dwc3 *dwc) {
>> phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
>> - dev_name(&dwc->xhci->dev));
>> + dev_name(dwc->dev));
>> phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> - dev_name(&dwc->xhci->dev));
>> + dev_name(dwc->dev));
>
>this looks unrelated to $subject. Care to explain?
>
Apologies. Will remove unrelated changes in next version.
>--
>balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
