is_int_ep is used only in acm_probe, no need to store it in device data.
Signed-off-by: Ladislav Michl <la...@linux-mips.org>
---
Changes:
- v3: new patch in the serie
drivers/usb/class/cdc-acm.c | 5 ++---
drivers/usb/class/cdc-acm.h | 1 -
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 670fa19..ad9f868a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1348,8 +1348,7 @@ static int acm_probe(struct usb_interface *intf,
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
- acm->is_int_ep = usb_endpoint_xfer_int(epread);
- if (acm->is_int_ep) {
+ if (usb_endpoint_xfer_int(epread)) {
acm->bInterval = epread->bInterval;
acm->in = usb_rcvintpipe(usb_dev, epread->bEndpointAddress);
} else {
@@ -1393,7 +1392,7 @@ static int acm_probe(struct usb_interface *intf,
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
urb->transfer_dma = rb->dma;
- if (acm->is_int_ep)
+ if (usb_endpoint_xfer_int(epread))
usb_fill_int_urb(urb, acm->dev, acm->in, rb->base,
acm->readsize,
acm_read_bulk_callback, rb,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 58ddd25..eca5a5f 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -117,7 +117,6 @@ struct acm {
unsigned int ctrl_caps; /* control capabilities
from the class specific header */
unsigned int susp_count; /* number of suspended
interfaces */
unsigned int combined_interfaces:1; /* control and data
collapsed */
- unsigned int is_int_ep:1; /* interrupt endpoints
contrary to spec used */
unsigned int throttled:1; /* actually throttled */
unsigned int throttle_req:1; /* throttle requested */
u8 bInterval;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
