* Bin Liu <b-...@ti.com> [170111 05:42]:
> On Tue, Jan 10, 2017 at 01:53:53PM -0600, Bin Liu wrote:
> > On Thu, Jan 05, 2017 at 11:12:59AM -0800, Tony Lindgren wrote:
> > > We can now configure the PMIC interrupt to provide us VBUS
> > > events. In that case we don't need to constantly poll the
> > > status and can make it optional. This is only wired up
> > > for the mini-B interface on beaglebone.
> >
> > Is it possible someone designed a board which hooks up the vbus of a
> > dual-role/otg port to PMIC? The port wouldn't be able to detect the
> > attach since no polling anymore.
>
> I haven't seen any am335xx design other than the Beaglebone, that routes
> VBUS to PMIC, and I guess the reason that Beaglebone did this way is
> only for supporting bus-powered.
Yeah I guess that remains to be seen. I guess it could also be configured
to use any 5V GPIO in the dts and ideally and work the same way.
> > > +static int dsps_setup_optional_vbus_irq(struct platform_device *pdev,
> > > + struct dsps_glue *glue)
> > > +{
> > > + int error;
> > > +
>
> How about check dr_mode at here, and simply return if dr_mode is not
> "peripheral". So this ensures this VBUS irq is only used for device
> mode, it clear my concern above.
Yeah OK I like your idea of limiting it to peripheral only for now.
Will repost with your other comments addressed also.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
