Make sure to detect and return an error on zero-length control-message
transfers when reading from the device.

This addresses a potential failure to detect an empty transmit buffer
during close.

Also remove a redundant check for short transfer when sending a command.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <[email protected]>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c 
b/drivers/usb/serial/ti_usb_3410_5052.c
index 64b85b8dedf3..3107bf5d1c96 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1553,13 +1553,10 @@ static int ti_command_out_sync(struct ti_device *tdev, 
__u8 command,
                (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
                value, moduleid, data, size, 1000);
 
-       if (status == size)
-               status = 0;
-
-       if (status > 0)
-               status = -ECOMM;
+       if (status < 0)
+               return status;
 
-       return status;
+       return 0;
 }
 
 
@@ -1575,8 +1572,7 @@ static int ti_command_in_sync(struct ti_device *tdev, 
__u8 command,
 
        if (status == size)
                status = 0;
-
-       if (status > 0)
+       else if (status >= 0)
                status = -ECOMM;
 
        return status;
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to