Hi Roger,
在 2017年01月13日 19:02, Roger Quadros 写道:
Hi,
On 13/01/17 05:18, William Wu wrote:
From: William wu <william...@rock-chips.com>
The commit 4ac53087d6d4 ("usb: xhci: plat: Create both
HCDs before adding them") move add hcd to the end of
probe, this cause hcc_params uninitiated, because xHCI
driver sets hcc_params in xhci_gen_setup() called from
usb_add_hcd().
This patch checks the Maximum Primary Stream Array Size
in the hcc_params register after add hcd.
Signed-off-by: William wu <william...@rock-chips.com>
---
drivers/usb/host/xhci-plat.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ddfab30..52ce697 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -232,9 +232,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;
- if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
- xhci->shared_hcd->can_do_streams = 1;
-
hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
@@ -255,6 +252,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (ret)
goto dealloc_usb2_hcd;
+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ xhci->shared_hcd->can_do_streams = 1;
+
xhci->hcc_params is initialized after the first usb_add_hcd().
Should this bit come before the usb_add_hcd(xhci->shared_hcd,..)?
Yes, good idea！I will move it behind the first usb_add_hcd().
You will also need to copy to v4.2+ <sta...@vger.kernel.org>. Thanks.
OK, thank you for reminding me!
return 0;
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
