On 19/01/17 22:49, John Youn wrote: > So it is valid to have say, DWC_USB3_NUM_EPS=8 and > DWC_USB3_NUM_IN_EPS=8. Even though it is not possible to use all 8 EPs > as IN since you need at least one of them to be a control OUT. So you > could have a configuration of EP0 IN and OUT plus 6 IN EPs (total 1 > OUT, 7 IN). Or EP0 IN and OUT plus any other combination of IN/OUT for > the remaining 6 EPs. > > With the above in mind, you can probably just redo the endpoint number > logic in dwc3 to handle all cases without any quirks at all.
I thought of that. > If it is disabled, it will fix the physical and logical EP number and > direction of the available EPs to meet timings for FPGA designs. This > shouldn't be used in final designs for ASICS but we don't know for > sure whether it has made it to any final designs or not. > > And unfortunately, whether this is set or not is not visible to the > software so it will require a quirk. but arrived at this conclusion because I couldn't think of a reasonable guess value for IN/OUT endpoint numbers that would work if DWC_USB3_NUM_EPS == DWC_USB3_NUM_IN_EPS thanks --- bod -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
