From: Felipe Balbi <felipe.ba...@linux.intel.com>
By extracting xhci_td_cleanup() from finish_td(), code before clearer
and easier to follow.
There are no functional changes with this patch. It's merely a cleanup.
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.ny...@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 92 ++++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 42 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 627518d..31518dd 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1822,6 +1822,55 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci,
unsigned int trb_comp_code)
return 0;
}
+static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
+ struct xhci_ring *ep_ring, int *status)
+{
+ struct urb_priv *urb_priv;
+ struct urb *urb = NULL;
+
+ /* Clean up the endpoint's TD list */
+ urb = td->urb;
+ urb_priv = urb->hcpriv;
+
+ /* if a bounce buffer was used to align this td then unmap it */
+ if (td->bounce_seg)
+ xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
+
+ /* Do one last check of the actual transfer length.
+ * If the host controller said we transferred more data than the buffer
+ * length, urb->actual_length will be a very big number (since it's
+ * unsigned). Play it safe and say we didn't transfer anything.
+ */
+ if (urb->actual_length > urb->transfer_buffer_length) {
+ xhci_warn(xhci, "URB req %u and actual %u transfer length
mismatch\n",
+ urb->transfer_buffer_length, urb->actual_length);
+ urb->actual_length = 0;
+ *status = 0;
+ }
+ list_del_init(&td->td_list);
+ /* Was this TD slated to be cancelled but completed anyway? */
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+
+ inc_td_cnt(urb);
+ /* Giveback the urb when all the tds are completed */
+ if (last_td_in_urb(td)) {
+ if ((urb->actual_length != urb->transfer_buffer_length &&
+ (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
+ (*status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, expected =
%d, status = %d\n",
+ urb, urb->actual_length,
+ urb->transfer_buffer_length, *status);
+
+ /* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ *status = 0;
+ xhci_giveback_urb_in_irq(xhci, td, *status);
+ }
+
+ return 0;
+}
+
static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status, bool skip)
@@ -1829,8 +1878,6 @@ static int finish_td(struct xhci_hcd *xhci, struct
xhci_td *td,
struct xhci_virt_device *xdev;
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
- struct urb_priv *urb_priv;
- struct urb *urb = NULL;
unsigned int slot_id;
u32 trb_comp_code;
int ep_index;
@@ -1873,46 +1920,7 @@ static int finish_td(struct xhci_hcd *xhci, struct
xhci_td *td,
}
td_cleanup:
- /* Clean up the endpoint's TD list */
- urb = td->urb;
- urb_priv = urb->hcpriv;
-
- /* if a bounce buffer was used to align this td then unmap it */
- if (td->bounce_seg)
- xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
-
- /* Do one last check of the actual transfer length.
- * If the host controller said we transferred more data than the buffer
- * length, urb->actual_length will be a very big number (since it's
- * unsigned). Play it safe and say we didn't transfer anything.
- */
- if (urb->actual_length > urb->transfer_buffer_length) {
- xhci_warn(xhci, "URB req %u and actual %u transfer length
mismatch\n",
- urb->transfer_buffer_length, urb->actual_length);
- urb->actual_length = 0;
- *status = 0;
- }
- list_del_init(&td->td_list);
- /* Was this TD slated to be cancelled but completed anyway? */
- if (!list_empty(&td->cancelled_td_list))
- list_del_init(&td->cancelled_td_list);
-
- inc_td_cnt(urb);
- /* Giveback the urb when all the tds are completed */
- if (last_td_in_urb(td)) {
- if ((urb->actual_length != urb->transfer_buffer_length &&
- (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
- (*status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
- xhci_dbg(xhci, "Giveback URB %p, len = %d, expected =
%d, status = %d\n",
- urb, urb->actual_length,
- urb->transfer_buffer_length, *status);
-
- /* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
- *status = 0;
- xhci_giveback_urb_in_irq(xhci, td, *status);
- }
- return 0;
+ return xhci_td_cleanup(xhci, td, ep_ring, status);
}
/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
