On 1/23/2017 5:34 AM, Bryan O'Donoghue wrote:
> On 23/01/17 12:08, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Bryan O'Donoghue <pure.lo...@nexus-software.ie> writes:
>>> - DWC_USB3_NUM indicates the number of Device mode single directional
>>> endpoints, including OUT and IN endpoint 0.
>>>
>>> - DWC_USB3_NUM_IN_EPS indicates the maximum number of Device mode IN
>>> endpoints active at any time, including control endpoint 0.
>>>
>>> It's possible to configure RTL such that DWC_USB3_NUM_EPS is equal to
>>> DWC_USB3_NUM_IN_EPS.
>>>
>>> dwc3-core calculates the number of OUT endpoints as DWC_USB3_NUM minus
>>> DWC_USB3_NUM_IN_EPS. If RTL has been configured with DWC_USB3_NUM_IN_EPS
>>> equal to DWC_USB3_NUM then dwc3-core will calculate the number of OUT
>>> endpoints as zero.
>>>
>>> For example a from dwc3_core_num_eps() shows:
>>> [ 1.565000] /usb0@f01d0000: found 8 IN and 0 OUT endpoints
>>>
>>> This patch works around this case by detecting when DWC_USB3_NUM_EPS is
>>> equal to DWC3_USB3_NUM_IN_EPS and over-rides the calculation of the number
>>> of OUT and IN endpoints to make dwc->num_in_eps equal to half
>>> DWC_USB3_NUM_EPS.
>>>
>>> If DWC_USB3_NUM_EPS is equal to DWC3_USB3_NUM_IN_EPS and the endpoint count
>>> is an odd number then dwc->num_out_eps will be assigned the extra endpoint.
>>
>> sorry, now that I spent some more time with this. Isn't something like
>> below solving all problems?
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 369bab16a824..68c9c84b7216 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -397,8 +397,7 @@ static void dwc3_core_num_eps(struct dwc3 *dwc)
>> {
>> struct dwc3_hwparams *parms = &dwc->hwparams;
>>
>> - dwc->num_in_eps = DWC3_NUM_IN_EPS(parms);
>> - dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps;
>> + dwc->num_eps = DWC3_NUM_EPS(parms);
>> }
>>
>> static void dwc3_cache_hwparams(struct dwc3 *dwc)
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 0a664d8eba3f..8c187df0aa42 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -2001,23 +2002,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3
>> *dwc,
>>
>> static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
>> {
>> - int ret;
>> -
>> - INIT_LIST_HEAD(&dwc->gadget.ep_list);
>> -
>> - ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
>> - if (ret < 0) {
>> - dev_err(dwc->dev, "failed to initialize OUT endpoints\n");
>> - return ret;
>> - }
>> -
>> - ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
>> - if (ret < 0) {
>> - dev_err(dwc->dev, "failed to initialize IN endpoints\n");
>> - return ret;
>> - }
>> -
>> - return 0;
>> + return dwc3_gadget_init_hw_endpoints(dwc, dwc->num_eps);
>
> Well I hadn't considered that level of change myself but, it should work.
>
It should work for ASICS.
But it won't work for our FPGA platform. It needs to work the
existing, more limited, way. You can check this with the
GHWPARAMS6.EN_FPGA.
John
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
