From: Tony Lindgren <[email protected]>
Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for
musb-core") started implementing musb generic runtime PM support by
introducing devctl register session bit based state control.
This caused a regression where if a USB mass storage device is connected
to a USB hub, we can get:
usb 1-1: reset high-speed USB device number 2 using musb-hdrc
usb 1-1: device descriptor read/64, error -71
usb 1-1.1: new high-speed USB device number 4 using musb-hdrc
This is because before the USB storage device is connected, musb is
in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume
in musb_stage0_irq() and the related code calling finish_resume_work
in musb_resume() and musb_runtime_resume() never gets called.
To fix the issue, we can call schedule_delayed_work() directly in
musb_stage0_irq() to have finish_resume_work run.
And we should no longer never get interrupts when when suspended.
We have changed musb to no longer need pm_runtime_irqsafe().
The need_finish_resume flag was added in commit 9298b4aad37e ("usb:
musb: fix device hotplug behind hub") and no longer applies as far
as I can tell. So let's just remove the earlier code that no longer
is needed.
Fixes: 467d5c980709 ("usb: musb: Implement session bit based
runtime PM for musb-core")
Reported-by: Bin Liu <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
---
drivers/usb/musb/musb_core.c | 15 ++-------------
drivers/usb/musb/musb_core.h | 1 -
2 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index fca288bbc800..cd40467be3c5 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -594,11 +594,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8
int_usb,
| MUSB_PORT_STAT_RESUME;
musb->rh_timer = jiffies
+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
- musb->need_finish_resume = 1;
-
musb->xceiv->otg->state = OTG_STATE_A_HOST;
musb->is_active = 1;
musb_host_resume_root_hub(musb);
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(USB_RESUME_TIMEOUT));
break;
case OTG_STATE_B_WAIT_ACON:
musb->xceiv->otg->state =
OTG_STATE_B_PERIPHERAL;
@@ -2710,11 +2710,6 @@ static int musb_resume(struct device *dev)
mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV;
if ((devctl & mask) != (musb->context.devctl & mask))
musb->port1_status = 0;
- if (musb->need_finish_resume) {
- musb->need_finish_resume = 0;
- schedule_delayed_work(&musb->finish_resume_work,
- msecs_to_jiffies(USB_RESUME_TIMEOUT));
- }
/*
* The USB HUB code expects the device to be in RPM_ACTIVE once it came
@@ -2766,12 +2761,6 @@ static int musb_runtime_resume(struct device *dev)
musb_restore_context(musb);
- if (musb->need_finish_resume) {
- musb->need_finish_resume = 0;
- schedule_delayed_work(&musb->finish_resume_work,
- msecs_to_jiffies(USB_RESUME_TIMEOUT));
- }
-
spin_lock_irqsave(&musb->lock, flags);
error = musb_run_resume_work(musb);
if (error)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index ade902ea1221..ce5a18c98c6d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -410,7 +410,6 @@ struct musb {
/* is_suspended means USB B_PERIPHERAL suspend */
unsigned is_suspended:1;
- unsigned need_finish_resume :1;
/* may_wakeup means remote wakeup is enabled */
unsigned may_wakeup:1;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
