On 1/28/2017 6:21 PM, Bruno Herrera wrote:
> This patch introduces a new parameter to activate USB OTG HS/FS core embedded
> phy transceiver. The STM32F4x9 SoC uses the GGPIO register to enable the 
> transceiver.
> Also add the dwc2_core_params structure for stm32f4 otg fs.
>

Could you fix the "checkpatch --strict" issues?

Thanks,
John


> Signed-off-by: Bruno Herrera <[email protected]>
> ---
>  drivers/usb/dwc2/core.h   |  4 ++++
>  drivers/usb/dwc2/hcd.c    | 13 ++++++++++++-
>  drivers/usb/dwc2/hw.h     |  2 ++
>  drivers/usb/dwc2/params.c | 20 ++++++++++++++++++++
>  4 files changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index b9b62f1..ed8ce42 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -423,6 +423,9 @@ enum dwc2_ep0_state {
>   *                   needed.
>   *                   0 - No (default)
>   *                   1 - Yes
> + * @activate_transceiver: Activate internal transceiver using GGPIO register.
> + *                   0 - Deactivate the transceiver (default)
> + *                   1 - Activate the transceiver
>   * @g_dma:              Enables gadget dma usage (default: autodetect).
>   * @g_dma_desc:         Enables gadget descriptor DMA (default: autodetect).
>   * @g_rx_fifo_size:  The periodic rx fifo size for the device, in
> @@ -477,6 +480,7 @@ struct dwc2_core_params {
>       bool uframe_sched;
>       bool external_id_pin_ctl;
>       bool hibernation;
> +     bool activate_transceiver;
>       u16 max_packet_count;
>       u32 max_transfer_size;
>       u32 ahbcfg;
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index a73722e..190a441 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -121,7 +121,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg 
> *hsotg)
>
>  static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
>  {
> -     u32 usbcfg, i2cctl;
> +     u32 usbcfg, ggpio, i2cctl;
>       int retval = 0;
>
>       /*
> @@ -145,6 +145,17 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, 
> bool select_phy)
>                               return retval;
>                       }
>               }
> +
> +             ggpio = dwc2_readl(hsotg->regs + GGPIO);
> +             if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN) &&
> +                 (hsotg->params.activate_transceiver > 0)) {
> +                     dev_dbg(hsotg->dev, "Activating transceiver\n");
> +                     /* STM32F4x9 uses the GGPIO register as general core
> +                      * configuration register.
> +                      */
> +                     ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
> +                     dwc2_writel(ggpio, hsotg->regs + GGPIO);
> +             }
>       }
>
>       /*
> diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
> index bde7248..9b432c1 100644
> --- a/drivers/usb/dwc2/hw.h
> +++ b/drivers/usb/dwc2/hw.h
> @@ -225,6 +225,8 @@
>
>  #define GPVNDCTL                     HSOTG_REG(0x0034)
>  #define GGPIO                                HSOTG_REG(0x0038)
> +#define GGPIO_STM32_OTG_GCCFG_PWRDWN (1 << 16)
> +
>  #define GUID                         HSOTG_REG(0x003c)
>  #define GSNPSID                              HSOTG_REG(0x0040)
>  #define GHWCFG1                              HSOTG_REG(0x0044)
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 2990c34..a35abba 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -120,6 +120,23 @@ static void dwc2_set_amcc_params(struct dwc2_hsotg 
> *hsotg)
>       p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
>  }
>
> +static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
> +{
> +     struct dwc2_core_params *p = &hsotg->params;
> +
> +     p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> +     p->speed = DWC2_SPEED_PARAM_FULL;
> +     p->host_rx_fifo_size = 128;
> +     p->host_nperio_tx_fifo_size = 96;
> +     p->host_perio_tx_fifo_size = 96;
> +     p->max_packet_count = 256;
> +     p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
> +     p->i2c_enable = false;
> +     p->uframe_sched = false;
> +     p->activate_transceiver = true;
> +
> +}
> +
>  const struct of_device_id dwc2_of_match_table[] = {
>       { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
>       { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
> @@ -133,6 +150,9 @@ const struct of_device_id dwc2_of_match_table[] = {
>       { .compatible = "amlogic,meson-gxbb-usb",
>         .data = dwc2_set_amlogic_params },
>       { .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
> +     { .compatible = "st,stm32f4x9-fsotg",
> +       .data = dwc2_set_stm32f4x9_fsotg_params },
> +     { .compatible = "st,stm32f4x9-hsotg" },
>       {},
>  };
>  MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to