Move all declarations and definitions in keyspan.h to keyspan.c, which
is the only place were they are used.
This specifically moves the driver device-id tables and usb-serial
driver definitions to the source file where they are expected to be
found.
While at it, fix up some multi-line comments and minor white-space
issues (spaces instead of tabs and superfluous white space).
Note that the information in the comment header of the removed header
file is also present in the source file.
Signed-off-by: Johan Hovold <jo...@kernel.org>
---
drivers/usb/serial/keyspan.c | 592 +++++++++++++++++++++++++++++++++++++++-
drivers/usb/serial/keyspan.h | 629 -------------------------------------------
2 files changed, 589 insertions(+), 632 deletions(-)
delete mode 100644 drivers/usb/serial/keyspan.h
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 1f9414bdd649..5662d324edd2 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -41,11 +41,508 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/usb/ezusb.h>
-#include "keyspan.h"
#define DRIVER_AUTHOR "Hugh Blemings <h...@misc.nu"
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
+/* Function prototypes for Keyspan serial converter */
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void keyspan_close(struct usb_serial_port *port);
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on);
+static int keyspan_startup(struct usb_serial *serial);
+static void keyspan_disconnect(struct usb_serial *serial);
+static void keyspan_release(struct usb_serial *serial);
+static int keyspan_port_probe(struct usb_serial_port *port);
+static int keyspan_port_remove(struct usb_serial_port *port);
+static int keyspan_write_room(struct tty_struct *tty);
+static int keyspan_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static void keyspan_send_setup(struct usb_serial_port *port, int reset_port);
+static void keyspan_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old);
+static void keyspan_break_ctl(struct tty_struct *tty, int break_state);
+static int keyspan_tiocmget(struct tty_struct *tty);
+static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set,
+ unsigned int clear);
+static int keyspan_fake_startup(struct usb_serial *serial);
+
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+
+static int keyspan_usa28_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa26_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa49_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa90_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+
+/* Values used for baud rate calculation - device specific */
+#define KEYSPAN_INVALID_BAUD_RATE (-1)
+#define KEYSPAN_BAUD_RATE_OK (0)
+#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */
+#define KEYSPAN_USA19_BAUDCLK (12000000L)
+#define KEYSPAN_USA19W_BAUDCLK (24000000L)
+#define KEYSPAN_USA19HS_BAUDCLK (14769231L)
+#define KEYSPAN_USA28_BAUDCLK (1843200L)
+#define KEYSPAN_USA28X_BAUDCLK (12000000L)
+#define KEYSPAN_USA49W_BAUDCLK (48000000L)
+
+/* Some constants used to characterise each device. */
+#define KEYSPAN_MAX_NUM_PORTS (4)
+#define KEYSPAN_MAX_FLIPS (2)
+
+/*
+ * Device info for the Keyspan serial converter, used by the overall
+ * usb-serial probe function.
+ */
+#define KEYSPAN_VENDOR_ID (0x06cd)
+
+/* Product IDs for the products supported, pre-renumeration */
+#define keyspan_usa18x_pre_product_id 0x0105
+#define keyspan_usa19_pre_product_id 0x0103
+#define keyspan_usa19qi_pre_product_id 0x010b
+#define keyspan_mpr_pre_product_id 0x011b
+#define keyspan_usa19qw_pre_product_id 0x0118
+#define keyspan_usa19w_pre_product_id 0x0106
+#define keyspan_usa28_pre_product_id 0x0101
+#define keyspan_usa28x_pre_product_id 0x0102
+#define keyspan_usa28xa_pre_product_id 0x0114
+#define keyspan_usa28xb_pre_product_id 0x0113
+#define keyspan_usa49w_pre_product_id 0x0109
+#define keyspan_usa49wlc_pre_product_id 0x011a
+
+/*
+ * Product IDs post-renumeration. Note that the 28x and 28xb have the same
+ * id's post-renumeration but behave identically so it's not an issue. As
+ * such, the 28xb is not listed in any of the device tables.
+ */
+#define keyspan_usa18x_product_id 0x0112
+#define keyspan_usa19_product_id 0x0107
+#define keyspan_usa19qi_product_id 0x010c
+#define keyspan_usa19hs_product_id 0x0121
+#define keyspan_mpr_product_id 0x011c
+#define keyspan_usa19qw_product_id 0x0119
+#define keyspan_usa19w_product_id 0x0108
+#define keyspan_usa28_product_id 0x010f
+#define keyspan_usa28x_product_id 0x0110
+#define keyspan_usa28xa_product_id 0x0115
+#define keyspan_usa28xb_product_id 0x0110
+#define keyspan_usa28xg_product_id 0x0135
+#define keyspan_usa49w_product_id 0x010a
+#define keyspan_usa49wlc_product_id 0x012a
+#define keyspan_usa49wg_product_id 0x0131
+
+struct keyspan_device_details {
+ /* product ID value */
+ int product_id;
+
+ enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67}
msg_format;
+
+ /* Number of physical ports */
+ int num_ports;
+
+ /* 1 if endpoint flipping used on input, 0 if not */
+ int indat_endp_flip;
+
+ /* 1 if endpoint flipping used on output, 0 if not */
+ int outdat_endp_flip;
+
+ /*
+ * Table mapping input data endpoint IDs to physical port
+ * number and flip if used
+ */
+ int indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Same for output endpoints */
+ int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Input acknowledge endpoints */
+ int inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Output control endpoints */
+ int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Endpoint used for input status */
+ int instat_endpoint;
+
+ /* Endpoint used for input data 49WG only */
+ int indat_endpoint;
+
+ /* Endpoint used for global control functions */
+ int glocont_endpoint;
+
+ int (*calculate_baud_rate)(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low, u8 *prescaler,
+ int portnum);
+ u32 baudclk;
+};
+
+/*
+ * Now for each device type we setup the device detail structure with the
+ * appropriate information (provided in Keyspan's documentation)
+ */
+
+static const struct keyspan_device_details usa18x_device_details = {
+ .product_id = keyspan_usa18x_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x85},
+ .outcont_endpoints = {0x05},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA18X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19_device_details = {
+ .product_id = keyspan_usa19_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 1,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x83},
+ .outcont_endpoints = {0x03},
+ .instat_endpoint = 0x84,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa19_calc_baud,
+ .baudclk = KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qi_device_details = {
+ .product_id = keyspan_usa19qi_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 1,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x83},
+ .outcont_endpoints = {0x03},
+ .instat_endpoint = 0x84,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa28_calc_baud,
+ .baudclk = KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details mpr_device_details = {
+ .product_id = keyspan_mpr_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 1,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x83},
+ .outcont_endpoints = {0x03},
+ .instat_endpoint = 0x84,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa28_calc_baud,
+ .baudclk = KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qw_device_details = {
+ .product_id = keyspan_usa19qw_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x85},
+ .outcont_endpoints = {0x05},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19w_device_details = {
+ .product_id = keyspan_usa19w_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x85},
+ .outcont_endpoints = {0x05},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19hs_device_details = {
+ .product_id = keyspan_usa19hs_product_id,
+ .msg_format = msg_usa90,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {-1},
+ .outcont_endpoints = {0x02},
+ .instat_endpoint = 0x82,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa19hs_calc_baud,
+ .baudclk = KEYSPAN_USA19HS_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28_device_details = {
+ .product_id = keyspan_usa28_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 2,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81, 0x83},
+ .outdat_endpoints = {0x01, 0x03},
+ .inack_endpoints = {0x85, 0x86},
+ .outcont_endpoints = {0x05, 0x06},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa28_calc_baud,
+ .baudclk = KEYSPAN_USA28_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28x_device_details = {
+ .product_id = keyspan_usa28x_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81, 0x83},
+ .outdat_endpoints = {0x01, 0x03},
+ .inack_endpoints = {0x85, 0x86},
+ .outcont_endpoints = {0x05, 0x06},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xa_device_details = {
+ .product_id = keyspan_usa28xa_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81, 0x83},
+ .outdat_endpoints = {0x01, 0x03},
+ .inack_endpoints = {0x85, 0x86},
+ .outcont_endpoints = {0x05, 0x06},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xg_device_details = {
+ .product_id = keyspan_usa28xg_product_id,
+ .msg_format = msg_usa67,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x84, 0x88},
+ .outdat_endpoints = {0x02, 0x06},
+ .inack_endpoints = {-1, -1},
+ .outcont_endpoints = {-1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x01,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
+/*
+ * We don't need a separate entry for the usa28xb as it appears as a 28x
+ * anyway.
+ */
+
+static const struct keyspan_device_details usa49w_device_details = {
+ .product_id = keyspan_usa49w_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
+ .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA49W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wlc_device_details = {
+ .product_id = keyspan_usa49wlc_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
+ .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wg_device_details = {
+ .product_id = keyspan_usa49wg_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data
in EP */
+ .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = 0x88,
+ .glocont_endpoint = 0x00, /* uses control EP */
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details *keyspan_devices[] = {
+ &usa18x_device_details,
+ &usa19_device_details,
+ &usa19qi_device_details,
+ &mpr_device_details,
+ &usa19qw_device_details,
+ &usa19w_device_details,
+ &usa19hs_device_details,
+ &usa28_device_details,
+ &usa28x_device_details,
+ &usa28xa_device_details,
+ &usa28xg_device_details,
+ /* 28xb not required as it renumerates as a 28x */
+ &usa49w_device_details,
+ &usa49wlc_device_details,
+ &usa49wg_device_details,
+ NULL,
+};
+
+static const struct usb_device_id keyspan_ids_combined[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
+
+/* usb_device_id table for the pre-firmware download keyspan devices */
+static const struct usb_device_id keyspan_pre_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_1port_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_2port_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_4port_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+ { } /* Terminating entry */
+};
+
#define INSTAT_BUFLEN 32
#define GLOCONT_BUFLEN 64
#define INDAT49W_BUFLEN 512
@@ -126,8 +623,6 @@ struct keyspan_port_private {
#include "keyspan_usa67msg.h"
-module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
-
static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2523,6 +3018,97 @@ static int keyspan_port_remove(struct usb_serial_port
*port)
return 0;
}
+/* Structs for the devices, pre and post renumeration. */
+static struct usb_serial_driver keyspan_pre_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_no_firm",
+ },
+ .description = "Keyspan - (without firmware)",
+ .id_table = keyspan_pre_ids,
+ .num_ports = 1,
+ .attach = keyspan_fake_startup,
+};
+
+static struct usb_serial_driver keyspan_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_1",
+ },
+ .description = "Keyspan 1 port adapter",
+ .id_table = keyspan_1port_ids,
+ .num_ports = 1,
+ .open = keyspan_open,
+ .close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
+ .write = keyspan_write,
+ .write_room = keyspan_write_room,
+ .set_termios = keyspan_set_termios,
+ .break_ctl = keyspan_break_ctl,
+ .tiocmget = keyspan_tiocmget,
+ .tiocmset = keyspan_tiocmset,
+ .attach = keyspan_startup,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_2",
+ },
+ .description = "Keyspan 2 port adapter",
+ .id_table = keyspan_2port_ids,
+ .num_ports = 2,
+ .open = keyspan_open,
+ .close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
+ .write = keyspan_write,
+ .write_room = keyspan_write_room,
+ .set_termios = keyspan_set_termios,
+ .break_ctl = keyspan_break_ctl,
+ .tiocmget = keyspan_tiocmget,
+ .tiocmset = keyspan_tiocmset,
+ .attach = keyspan_startup,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_4",
+ },
+ .description = "Keyspan 4 port adapter",
+ .id_table = keyspan_4port_ids,
+ .num_ports = 4,
+ .open = keyspan_open,
+ .close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
+ .write = keyspan_write,
+ .write_room = keyspan_write_room,
+ .set_termios = keyspan_set_termios,
+ .break_ctl = keyspan_break_ctl,
+ .tiocmget = keyspan_tiocmget,
+ .tiocmset = keyspan_tiocmset,
+ .attach = keyspan_startup,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &keyspan_pre_device, &keyspan_1port_device,
+ &keyspan_2port_device, &keyspan_4port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
+
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
deleted file mode 100644
index 0273dda303a4..000000000000
--- a/drivers/usb/serial/keyspan.h
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
- Keyspan USB to Serial Converter driver
-
- (C) Copyright (C) 2000-2001
- Hugh Blemings <h...@blemings.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- See http://blemings.org/hugh/keyspan.html for more information.
-
- Code in this driver inspired by and in a number of places taken
- from Brian Warner's original Keyspan-PDA driver.
-
- This driver has been put together with the support of Innosys, Inc.
- and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
- Thanks Guys :)
-
- Thanks to Paulus for miscellaneous tidy ups, some largish chunks
- of much nicer and/or completely new code and (perhaps most uniquely)
- having the patience to sit down and explain why and where he'd changed
- stuff.
-
- Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
- staff in their work on open source projects.
-
- See keyspan.c for update history.
-
-*/
-
-#ifndef __LINUX_USB_SERIAL_KEYSPAN_H
-#define __LINUX_USB_SERIAL_KEYSPAN_H
-
-
-/* Function prototypes for Keyspan serial converter */
-static int keyspan_open (struct tty_struct *tty,
- struct usb_serial_port *port);
-static void keyspan_close (struct usb_serial_port *port);
-static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
-static int keyspan_startup (struct usb_serial *serial);
-static void keyspan_disconnect (struct usb_serial *serial);
-static void keyspan_release (struct usb_serial *serial);
-static int keyspan_port_probe(struct usb_serial_port *port);
-static int keyspan_port_remove(struct usb_serial_port *port);
-static int keyspan_write_room (struct tty_struct *tty);
-
-static int keyspan_write (struct tty_struct *tty,
- struct usb_serial_port *port,
- const unsigned char *buf,
- int count);
-
-static void keyspan_send_setup (struct usb_serial_port *port,
- int reset_port);
-
-
-static void keyspan_set_termios (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old);
-static void keyspan_break_ctl (struct tty_struct *tty,
- int break_state);
-static int keyspan_tiocmget (struct tty_struct *tty);
-static int keyspan_tiocmset (struct tty_struct *tty,
- unsigned int set,
- unsigned int clear);
-static int keyspan_fake_startup (struct usb_serial *serial);
-
-static int keyspan_usa19_calc_baud (struct usb_serial_port *port,
- u32 baud_rate, u32 baudclk,
- u8 *rate_hi, u8 *rate_low,
- u8 *prescaler, int portnum);
-
-static int keyspan_usa19w_calc_baud (struct usb_serial_port *port,
- u32 baud_rate, u32 baudclk,
- u8 *rate_hi, u8 *rate_low,
- u8 *prescaler, int portnum);
-
-static int keyspan_usa28_calc_baud (struct usb_serial_port *port,
- u32 baud_rate, u32 baudclk,
- u8 *rate_hi, u8 *rate_low,
- u8 *prescaler, int portnum);
-
-static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port,
- u32 baud_rate, u32 baudclk,
- u8 *rate_hi, u8 *rate_low,
- u8 *prescaler, int portnum);
-
-static int keyspan_usa28_send_setup (struct usb_serial *serial,
- struct usb_serial_port *port,
- int reset_port);
-static int keyspan_usa26_send_setup (struct usb_serial *serial,
- struct usb_serial_port *port,
- int reset_port);
-static int keyspan_usa49_send_setup (struct usb_serial *serial,
- struct usb_serial_port *port,
- int reset_port);
-
-static int keyspan_usa90_send_setup (struct usb_serial *serial,
- struct usb_serial_port *port,
- int reset_port);
-
-static int keyspan_usa67_send_setup (struct usb_serial *serial,
- struct usb_serial_port *port,
- int reset_port);
-
-/* Values used for baud rate calculation - device specific */
-#define KEYSPAN_INVALID_BAUD_RATE (-1)
-#define KEYSPAN_BAUD_RATE_OK (0)
-#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a
guess */
-#define KEYSPAN_USA19_BAUDCLK (12000000L)
-#define KEYSPAN_USA19W_BAUDCLK (24000000L)
-#define KEYSPAN_USA19HS_BAUDCLK (14769231L)
-#define KEYSPAN_USA28_BAUDCLK (1843200L)
-#define KEYSPAN_USA28X_BAUDCLK (12000000L)
-#define KEYSPAN_USA49W_BAUDCLK (48000000L)
-
-/* Some constants used to characterise each device. */
-#define KEYSPAN_MAX_NUM_PORTS (4)
-#define KEYSPAN_MAX_FLIPS (2)
-
-/* Device info for the Keyspan serial converter, used
- by the overall usb-serial probe function */
-#define KEYSPAN_VENDOR_ID (0x06cd)
-
-/* Product IDs for the products supported, pre-renumeration */
-#define keyspan_usa18x_pre_product_id 0x0105
-#define keyspan_usa19_pre_product_id 0x0103
-#define keyspan_usa19qi_pre_product_id 0x010b
-#define keyspan_mpr_pre_product_id 0x011b
-#define keyspan_usa19qw_pre_product_id 0x0118
-#define keyspan_usa19w_pre_product_id 0x0106
-#define keyspan_usa28_pre_product_id 0x0101
-#define keyspan_usa28x_pre_product_id 0x0102
-#define keyspan_usa28xa_pre_product_id 0x0114
-#define keyspan_usa28xb_pre_product_id 0x0113
-#define keyspan_usa49w_pre_product_id 0x0109
-#define keyspan_usa49wlc_pre_product_id 0x011a
-
-/* Product IDs post-renumeration. Note that the 28x and 28xb
- have the same id's post-renumeration but behave identically
- so it's not an issue. As such, the 28xb is not listed in any
- of the device tables. */
-#define keyspan_usa18x_product_id 0x0112
-#define keyspan_usa19_product_id 0x0107
-#define keyspan_usa19qi_product_id 0x010c
-#define keyspan_usa19hs_product_id 0x0121
-#define keyspan_mpr_product_id 0x011c
-#define keyspan_usa19qw_product_id 0x0119
-#define keyspan_usa19w_product_id 0x0108
-#define keyspan_usa28_product_id 0x010f
-#define keyspan_usa28x_product_id 0x0110
-#define keyspan_usa28xa_product_id 0x0115
-#define keyspan_usa28xb_product_id 0x0110
-#define keyspan_usa28xg_product_id 0x0135
-#define keyspan_usa49w_product_id 0x010a
-#define keyspan_usa49wlc_product_id 0x012a
-#define keyspan_usa49wg_product_id 0x0131
-
-struct keyspan_device_details {
- /* product ID value */
- int product_id;
-
- enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67}
msg_format;
-
- /* Number of physical ports */
- int num_ports;
-
- /* 1 if endpoint flipping used on input, 0 if not */
- int indat_endp_flip;
-
- /* 1 if endpoint flipping used on output, 0 if not */
- int outdat_endp_flip;
-
- /* Table mapping input data endpoint IDs to physical
- port number and flip if used */
- int indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
- /* Same for output endpoints */
- int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
- /* Input acknowledge endpoints */
- int inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
- /* Output control endpoints */
- int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
- /* Endpoint used for input status */
- int instat_endpoint;
-
- /* Endpoint used for input data 49WG only */
- int indat_endpoint;
-
- /* Endpoint used for global control functions */
- int glocont_endpoint;
-
- int (*calculate_baud_rate) (struct usb_serial_port *port,
- u32 baud_rate, u32 baudclk,
- u8 *rate_hi, u8 *rate_low, u8
*prescaler, int portnum);
- u32 baudclk;
-};
-
-/* Now for each device type we setup the device detail
- structure with the appropriate information (provided
- in Keyspan's documentation) */
-
-static const struct keyspan_device_details usa18x_device_details = {
- .product_id = keyspan_usa18x_product_id,
- .msg_format = msg_usa26,
- .num_ports = 1,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {0x85},
- .outcont_endpoints = {0x05},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA18X_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19_device_details = {
- .product_id = keyspan_usa19_product_id,
- .msg_format = msg_usa28,
- .num_ports = 1,
- .indat_endp_flip = 1,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {0x83},
- .outcont_endpoints = {0x03},
- .instat_endpoint = 0x84,
- .indat_endpoint = -1,
- .glocont_endpoint = -1,
- .calculate_baud_rate = keyspan_usa19_calc_baud,
- .baudclk = KEYSPAN_USA19_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19qi_device_details = {
- .product_id = keyspan_usa19qi_product_id,
- .msg_format = msg_usa28,
- .num_ports = 1,
- .indat_endp_flip = 1,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {0x83},
- .outcont_endpoints = {0x03},
- .instat_endpoint = 0x84,
- .indat_endpoint = -1,
- .glocont_endpoint = -1,
- .calculate_baud_rate = keyspan_usa28_calc_baud,
- .baudclk = KEYSPAN_USA19_BAUDCLK,
-};
-
-static const struct keyspan_device_details mpr_device_details = {
- .product_id = keyspan_mpr_product_id,
- .msg_format = msg_usa28,
- .num_ports = 1,
- .indat_endp_flip = 1,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {0x83},
- .outcont_endpoints = {0x03},
- .instat_endpoint = 0x84,
- .indat_endpoint = -1,
- .glocont_endpoint = -1,
- .calculate_baud_rate = keyspan_usa28_calc_baud,
- .baudclk = KEYSPAN_USA19_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19qw_device_details = {
- .product_id = keyspan_usa19qw_product_id,
- .msg_format = msg_usa26,
- .num_ports = 1,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {0x85},
- .outcont_endpoints = {0x05},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19w_device_details = {
- .product_id = keyspan_usa19w_product_id,
- .msg_format = msg_usa26,
- .num_ports = 1,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {0x85},
- .outcont_endpoints = {0x05},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19hs_device_details = {
- .product_id = keyspan_usa19hs_product_id,
- .msg_format = msg_usa90,
- .num_ports = 1,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 0,
- .indat_endpoints = {0x81},
- .outdat_endpoints = {0x01},
- .inack_endpoints = {-1},
- .outcont_endpoints = {0x02},
- .instat_endpoint = 0x82,
- .indat_endpoint = -1,
- .glocont_endpoint = -1,
- .calculate_baud_rate = keyspan_usa19hs_calc_baud,
- .baudclk = KEYSPAN_USA19HS_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28_device_details = {
- .product_id = keyspan_usa28_product_id,
- .msg_format = msg_usa28,
- .num_ports = 2,
- .indat_endp_flip = 1,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81, 0x83},
- .outdat_endpoints = {0x01, 0x03},
- .inack_endpoints = {0x85, 0x86},
- .outcont_endpoints = {0x05, 0x06},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa28_calc_baud,
- .baudclk = KEYSPAN_USA28_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28x_device_details = {
- .product_id = keyspan_usa28x_product_id,
- .msg_format = msg_usa26,
- .num_ports = 2,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81, 0x83},
- .outdat_endpoints = {0x01, 0x03},
- .inack_endpoints = {0x85, 0x86},
- .outcont_endpoints = {0x05, 0x06},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA28X_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28xa_device_details = {
- .product_id = keyspan_usa28xa_product_id,
- .msg_format = msg_usa26,
- .num_ports = 2,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 1,
- .indat_endpoints = {0x81, 0x83},
- .outdat_endpoints = {0x01, 0x03},
- .inack_endpoints = {0x85, 0x86},
- .outcont_endpoints = {0x05, 0x06},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA28X_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28xg_device_details = {
- .product_id = keyspan_usa28xg_product_id,
- .msg_format = msg_usa67,
- .num_ports = 2,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 0,
- .indat_endpoints = {0x84, 0x88},
- .outdat_endpoints = {0x02, 0x06},
- .inack_endpoints = {-1, -1},
- .outcont_endpoints = {-1, -1},
- .instat_endpoint = 0x81,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x01,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA28X_BAUDCLK,
-};
-/* We don't need a separate entry for the usa28xb as it appears as a 28x
anyway */
-
-static const struct keyspan_device_details usa49w_device_details = {
- .product_id = keyspan_usa49w_product_id,
- .msg_format = msg_usa49,
- .num_ports = 4,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 0,
- .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
- .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
- .inack_endpoints = {-1, -1, -1, -1},
- .outcont_endpoints = {-1, -1, -1, -1},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA49W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa49wlc_device_details = {
- .product_id = keyspan_usa49wlc_product_id,
- .msg_format = msg_usa49,
- .num_ports = 4,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 0,
- .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
- .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
- .inack_endpoints = {-1, -1, -1, -1},
- .outcont_endpoints = {-1, -1, -1, -1},
- .instat_endpoint = 0x87,
- .indat_endpoint = -1,
- .glocont_endpoint = 0x07,
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa49wg_device_details = {
- .product_id = keyspan_usa49wg_product_id,
- .msg_format = msg_usa49,
- .num_ports = 4,
- .indat_endp_flip = 0,
- .outdat_endp_flip = 0,
- .indat_endpoints = {-1, -1, -1, -1}, /* single
'global' data in EP */
- .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
- .inack_endpoints = {-1, -1, -1, -1},
- .outcont_endpoints = {-1, -1, -1, -1},
- .instat_endpoint = 0x81,
- .indat_endpoint = 0x88,
- .glocont_endpoint = 0x00, /* uses control
EP */
- .calculate_baud_rate = keyspan_usa19w_calc_baud,
- .baudclk = KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details *keyspan_devices[] = {
- &usa18x_device_details,
- &usa19_device_details,
- &usa19qi_device_details,
- &mpr_device_details,
- &usa19qw_device_details,
- &usa19w_device_details,
- &usa19hs_device_details,
- &usa28_device_details,
- &usa28x_device_details,
- &usa28xa_device_details,
- &usa28xg_device_details,
- /* 28xb not required as it renumerates as a 28x */
- &usa49w_device_details,
- &usa49wlc_device_details,
- &usa49wg_device_details,
- NULL,
-};
-
-static const struct usb_device_id keyspan_ids_combined[] = {
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
-
-/* usb_device_id table for the pre-firmware download keyspan devices */
-static const struct usb_device_id keyspan_pre_ids[] = {
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
- { } /* Terminating entry */
-};
-
-static const struct usb_device_id keyspan_1port_ids[] = {
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
- { } /* Terminating entry */
-};
-
-static const struct usb_device_id keyspan_2port_ids[] = {
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
- { } /* Terminating entry */
-};
-
-static const struct usb_device_id keyspan_4port_ids[] = {
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
- { } /* Terminating entry */
-};
-
-/* Structs for the devices, pre and post renumeration. */
-static struct usb_serial_driver keyspan_pre_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "keyspan_no_firm",
- },
- .description = "Keyspan - (without firmware)",
- .id_table = keyspan_pre_ids,
- .num_ports = 1,
- .attach = keyspan_fake_startup,
-};
-
-static struct usb_serial_driver keyspan_1port_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "keyspan_1",
- },
- .description = "Keyspan 1 port adapter",
- .id_table = keyspan_1port_ids,
- .num_ports = 1,
- .open = keyspan_open,
- .close = keyspan_close,
- .dtr_rts = keyspan_dtr_rts,
- .write = keyspan_write,
- .write_room = keyspan_write_room,
- .set_termios = keyspan_set_termios,
- .break_ctl = keyspan_break_ctl,
- .tiocmget = keyspan_tiocmget,
- .tiocmset = keyspan_tiocmset,
- .attach = keyspan_startup,
- .disconnect = keyspan_disconnect,
- .release = keyspan_release,
- .port_probe = keyspan_port_probe,
- .port_remove = keyspan_port_remove,
-};
-
-static struct usb_serial_driver keyspan_2port_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "keyspan_2",
- },
- .description = "Keyspan 2 port adapter",
- .id_table = keyspan_2port_ids,
- .num_ports = 2,
- .open = keyspan_open,
- .close = keyspan_close,
- .dtr_rts = keyspan_dtr_rts,
- .write = keyspan_write,
- .write_room = keyspan_write_room,
- .set_termios = keyspan_set_termios,
- .break_ctl = keyspan_break_ctl,
- .tiocmget = keyspan_tiocmget,
- .tiocmset = keyspan_tiocmset,
- .attach = keyspan_startup,
- .disconnect = keyspan_disconnect,
- .release = keyspan_release,
- .port_probe = keyspan_port_probe,
- .port_remove = keyspan_port_remove,
-};
-
-static struct usb_serial_driver keyspan_4port_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "keyspan_4",
- },
- .description = "Keyspan 4 port adapter",
- .id_table = keyspan_4port_ids,
- .num_ports = 4,
- .open = keyspan_open,
- .close = keyspan_close,
- .dtr_rts = keyspan_dtr_rts,
- .write = keyspan_write,
- .write_room = keyspan_write_room,
- .set_termios = keyspan_set_termios,
- .break_ctl = keyspan_break_ctl,
- .tiocmget = keyspan_tiocmget,
- .tiocmset = keyspan_tiocmset,
- .attach = keyspan_startup,
- .disconnect = keyspan_disconnect,
- .release = keyspan_release,
- .port_probe = keyspan_port_probe,
- .port_remove = keyspan_port_remove,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &keyspan_pre_device, &keyspan_1port_device,
- &keyspan_2port_device, &keyspan_4port_device, NULL
-};
-
-#endif
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
