early console in setup code
[    0.000000] Linux version 4.8.0-rc4-00003-gbea5b15 (kbuild@lkp-nex05) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #2 SMP Sun Feb 26 03:35:36 CST 2017
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000170d1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000170d2000-0x00000000170fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x170d2 max_arch_pfn = 0x100000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b50-0x000f6b5f] mapped at [c00f6b50]
[    0.000000]   mpc: f6b60-f6c7c
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x033fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0308e000, 0x0308efff] PGTABLE
[    0.000000] BRK [0x0308f000, 0x0308ffff] PGTABLE
[    0.000000] BRK [0x03090000, 0x03090fff] PGTABLE
[    0.000000] BRK [0x03091000, 0x03091fff] PGTABLE
[    0.000000] BRK [0x03092000, 0x03092fff] PGTABLE
[    0.000000] BRK [0x03093000, 0x03093fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1588b000-0x170cffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6930 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000170E1936 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000170E180A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000170E0040 0017CA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000170E0000 000040
[    0.000000] ACPI: APIC 0x00000000170E187E 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000170E18FE 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 368MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 170d2000
[    0.000000]   low ram: 0 - 170d2000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:170d1001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 404998831 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x00000000170d1fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000170d1fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000170d1fff]
[    0.000000] On node 0 totalpages: 94320
[    0.000000] free_area_init_node: node 0, pgdat c1cd6140, node_mem_map d54ce020
[    0.000000]   Normal zone: 738 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 94320 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x17100000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 336 pages/cpu @d522e000 s1354560 r0 d21696 u1376256
[    0.000000] pcpu-alloc: s1354560 r0 d21696 u1376256 alloc=336*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 15230c40
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 93582
[    0.000000] Kernel command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw link=/kbuild-tests/run-queue/quantal-ivb41/i386-randconfig-h1-02252243/linux-devel:devel-spot-201702252217:bea5b158ff0da9c7246ff391f754f5f38e34577a:bisect-linux-39/.vmlinuz-bea5b158ff0da9c7246ff391f754f5f38e34577a-20170226034040-53-ivb41 branch=linux-devel/devel-spot-201702252217 BOOT_IMAGE=/pkg/linux/i386-randconfig-h1-02252243/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15 drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1908820 bytes of page_ext
[    0.000000] Memory: 310740K/377280K available (7245K kernel code, 1118K rwdata, 4796K rodata, 1964K init, 18120K bss, 66540K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     vmalloc : 0xd78d2000 - 0xfff14000   ( 646 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd70d2000   ( 368 MB)
[    0.000000]       .init : 0xc1cde000 - 0xc1ec9000   (1964 kB)
[    0.000000]       .data : 0xc1713a48 - 0xc1cdcb00   (5924 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1713a48   (7246 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:56 16
[    0.000000] CPU 0 irqstacks, hard=c0094000 soft=c0096000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5151 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2693.770 MHz processor
[    0.181693] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360)
[    0.182963] pid_max: default: 32768 minimum: 301
[    0.183728] ACPI: Core revision 20160422
[    0.187487] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.188474] 
[    0.188760] Security Framework initialized
[    0.189418] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190472] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.192028] CPU: Physical Processor ID: 0
[    0.192691] mce: CPU supports 10 MCE banks
[    0.193410] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.194195] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.195897] debug: unmapping init [mem 0xc1ec9000-0xc1ecdfff]
[    0.200331] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.201313] smpboot: APIC(1) Converting physical 1 to logical package 1
[    0.202280] smpboot: Max logical packages: 2
[    0.202933] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.203804] enabled ExtINT on CPU#0
[    0.205316] ENABLING IO-APIC IRQs
[    0.205824] init IO_APIC IRQs
[    0.206283]  apic 0 pin 0 not connected
[    0.206924] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.208103] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.209281] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.210484] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.211649] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.212827] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.214030] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.215195] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.216381] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.217583] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.218778] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.220017] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.221204] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.222404] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.223656] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.224833]  apic 0 pin 16 not connected
[    0.225416]  apic 0 pin 17 not connected
[    0.226005]  apic 0 pin 18 not connected
[    0.226588]  apic 0 pin 19 not connected
[    0.227197]  apic 0 pin 20 not connected
[    0.227780]  apic 0 pin 21 not connected
[    0.228363]  apic 0 pin 22 not connected
[    0.228935]  apic 0 pin 23 not connected
[    0.229689] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.231057] Using local APIC timer interrupts.
[    0.231057] calibrating APIC timer ...
[    0.336700] ... lapic delta = 6250601
[    0.337534] ... PM-Timer delta = 357999
[    0.338389] ... PM-Timer result ok
[    0.339141] ..... delta 6250601
[    0.339863] ..... mult: 268461295
[    0.340637] ..... calibration result: 3333653
[    0.341597] ..... CPU clock speed is 2694.0397 MHz.
[    0.342690] ..... host bus clock speed is 1000.0653 MHz.
[    0.343968] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)
[    0.345957] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.349326] CPU 1 irqstacks, hard=c0122000 soft=c0124000
[    0.350536] x86: Booting SMP configuration:
[    0.351485] .... node  #0, CPUs:      #1
[1266874889.304552] Initializing CPU#1
[    0.389901] kvm-clock: cpu 1, msr 0:170d1041, secondary cpu clock
[    0.390761] masked ExtINT on CPU#1
[    0.461461] KVM setup async PF for cpu 1
[    0.462042] kvm-stealtime: cpu 1, msr 15380c40
[    0.462871] x86: Booted up 1 node, 2 CPUs
[    0.463472] smpboot: Total of 2 processors activated (10778.95 BogoMIPS)
[    0.487718] devtmpfs: initialized
[    0.492103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.510688] prandom: seed boundary self test passed
[    0.512200] prandom: 100 self tests passed
[    0.512823] pinctrl core: initialized pinctrl subsystem
[    0.514064] regulator-dummy: Failed to create debugfs directory
[    0.524232] NET: Registered protocol family 16
[    0.537336] cpuidle: using governor ladder
[    0.584011] cpuidle: using governor menu
[    0.586397] ACPI: bus type PCI registered
[    0.587423] PCI: PCI BIOS revision 2.10 entry at 0xfd3e3, last bus=0
[    0.588360] PCI: Using configuration type 1 for base access
[    0.657774] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.659174] gpio-f7188x: Not a Fintek device at 0x0000002e
[    0.660034] gpio-f7188x: Not a Fintek device at 0x0000004e
[    0.661019] ACPI: Added _OSI(Module Device)
[    0.661647] ACPI: Added _OSI(Processor Device)
[    0.662295] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.663035] ACPI: Added _OSI(Processor Aggregator Device)
[    0.672972] ACPI: Interpreter enabled
[    0.673583] ACPI: (supports S0 S3 S5)
[    0.674135] ACPI: Using IOAPIC for interrupt routing
[    0.674928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.687884] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.688838] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.689663] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.690639] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.692469] PCI host bridge to bus 0000:00
[    0.693088] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.694078] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.695090] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.696158] pci_bus 0000:00: root bus resource [mem 0x17100000-0xfebfffff window]
[    0.697244] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.698145] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.699785] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.701624] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.729664] pci 0000:00:01.1: reg 0x20: [io  0xc200-0xc20f]
[    0.740729] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.741809] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.742757] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.743793] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.745227] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.746630] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.747689] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.749255] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.760310] pci 0000:00:02.0: reg 0x10: [mem 0xfa000000-0xfaffffff pref]
[    0.782248] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.827743] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.829432] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.840989] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.851718] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.903593] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.905242] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.922066] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.937242] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.981028] pci 0000:00:04.0: reg 0x20: [mem 0xfb000000-0xfb7fffff 64bit pref]
[    0.998338] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    1.013589] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    1.028962] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    1.072914] pci 0000:00:05.0: reg 0x20: [mem 0xfb800000-0xfbffffff 64bit pref]
[    1.089422] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[    1.104810] pci 0000:00:06.0: reg 0x10: [io  0xc0c0-0xc0ff]
[    1.119840] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
[    1.163235] pci 0000:00:06.0: reg 0x20: [mem 0xfc000000-0xfc7fffff 64bit pref]
[    1.179538] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[    1.194729] pci 0000:00:07.0: reg 0x10: [io  0xc100-0xc13f]
[    1.209859] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
[    1.253240] pci 0000:00:07.0: reg 0x20: [mem 0xfc800000-0xfcffffff 64bit pref]
[    1.269622] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[    1.284906] pci 0000:00:08.0: reg 0x10: [io  0xc140-0xc17f]
[    1.300029] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
[    1.343567] pci 0000:00:08.0: reg 0x20: [mem 0xfd000000-0xfd7fffff 64bit pref]
[    1.359844] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[    1.375095] pci 0000:00:09.0: reg 0x10: [io  0xc180-0xc1bf]
[    1.390089] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
[    1.433719] pci 0000:00:09.0: reg 0x20: [mem 0xfd800000-0xfdffffff 64bit pref]
[    1.450185] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000
[    1.465476] pci 0000:00:0a.0: reg 0x10: [io  0xc1c0-0xc1ff]
[    1.480490] pci 0000:00:0a.0: reg 0x14: [mem 0xfebf7000-0xfebf7fff]
[    1.524488] pci 0000:00:0a.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    1.541136] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000
[    1.547238] pci 0000:00:0b.0: reg 0x10: [mem 0xfebf8000-0xfebf800f]
[    1.577667] pci_bus 0000:00: on NUMA node 0
[    1.580508] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.581731] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.582888] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.584046] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.585121] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.586463] ACPI: Enabled 3 GPEs in block 00 to 0F
[    1.609381] ACPI: bus type USB registered
[    1.610060] usbcore: registered new interface driver usbfs
[    1.610895] usbcore: registered new interface driver hub
[    1.611704] usbcore: registered new device driver usb
[    1.612633] Linux video capture interface: v2.00
[    1.613334] pps_core: LinuxPPS API ver. 1 registered
[    1.614050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.615634] FPGA manager framework
[    1.616203] Advanced Linux Sound Architecture Driver Initialized.
[    1.617141] PCI: Using ACPI for IRQ routing
[    1.617761] PCI: pci_cache_line_size set to 64 bytes
[    1.618797] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.619678] e820: reserve RAM buffer [mem 0x170d2000-0x17ffffff]
[    1.622734] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.623548] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.644468] clocksource: Switched to clocksource kvm-clock
[    1.645396] VFS: Disk quotas dquot_6.6.0
[    1.684492] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.751208] FS-Cache: Loaded
[    1.787942] pnp: PnP ACPI init
[    1.788711] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.789885] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.791049] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.792048] pnp 00:03: [dma 2]
[    1.792587] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.793723] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.794940] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.796044] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.797681] pnp: PnP ACPI: found 7 devices
[    1.834544] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.835911] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.836817] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.837791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.838881] pci_bus 0000:00: resource 7 [mem 0x17100000-0xfebfffff window]
[    1.840088] NET: Registered protocol family 1
[    1.840836] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.841727] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.842597] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.843560] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.844911] PCI: CLS 0 bytes, default 64
[    1.845661] Unpacking initramfs...
[    2.830463] debug: unmapping init [mem 0xd588b000-0xd70cffff]
[    2.835707] Machine check injector initialized
[    2.836928] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    2.838085] apm: disabled - APM is not SMP safe.
[    2.838943] Scanning for low memory corruption every 60 seconds
[    2.851658] cryptomgr_test (30) used greatest stack depth: 7348 bytes left
[    2.854196] PCLMULQDQ-NI instructions are not detected.
[    2.855314] NatSemi SCx200 Driver
[    2.856000] spin_lock-torture:--- Start of test [debug]: nwriters_stress=4 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    2.858923] spin_lock-torture: Creating torture_shuffle task
[    2.859987] spin_lock-torture: Creating torture_stutter task
[    2.861013] spin_lock-torture: torture_stutter task started
[    2.862006] spin_lock-torture: Creating lock_torture_writer task
[    2.863097] spin_lock-torture: torture_shuffle task started
[    2.864094] spin_lock-torture: lock_torture_writer task started
[    2.876375] spin_lock-torture: Creating lock_torture_writer task
[    2.877477] spin_lock-torture: Creating lock_torture_writer task
[    2.878554] spin_lock-torture: lock_torture_writer task started
[    2.914468] spin_lock-torture: Creating lock_torture_writer task
[    2.915611] spin_lock-torture: Creating lock_torture_stats task
[    2.916657] spin_lock-torture: lock_torture_writer task started
[    2.927403] spin_lock-torture: lock_torture_writer task started
[    2.928619] torture_init_begin: Refusing rcu init: spin_lock running.
[    2.929647] torture_init_begin: One torture test at a time!
[    2.949403] spin_lock-torture: lock_torture_stats task started
[    2.968393] futex hash table entries: 512 (order: 3, 32768 bytes)
[    2.970063] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    3.077850] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    3.097814] fuse init (API version 7.25)
[    3.148210] orangefs_init: called with debug mask: :none: :0:
[    3.221330] orangefs: module version upstream loaded
[    3.227791] cryptomgr_test (84) used greatest stack depth: 7204 bytes left
[    3.235529] test_string_helpers: Running tests...
[    3.238376] test_hexdump: all 1184 tests passed
[    3.249408] test_firmware: interface ready
[    3.250149] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    3.251214] Test 00:
[    3.253035]   Adding 50000 keys
[    3.447165]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.536145]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.537539]   Deleting 50000 keys
[    3.642082]   Duration of test: 388487089 ns
[    3.642853] Test 01:
[    3.644507]   Adding 50000 keys
[    3.748125] Info: encountered resize
[    3.749908]   Traversal complete: counted=51198, nelems=50000, entries=50000, table-jumps=1
[    3.751117] Test failed: Total count mismatch ^^^
[    3.844540] tsc: Refined TSC clocksource calibration: 2693.504 MHz
[    3.845509] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d345dbcd4, max_idle_ns: 440795302414 ns
[    3.856290]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.857500]   Deleting 50000 keys
[    3.918739]   Duration of test: 273772134 ns
[    3.919510] Test 02:
[    3.921287]   Adding 50000 keys
[    4.041683]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.120059]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.121304]   Deleting 50000 keys
[    4.183115]   Duration of test: 261338276 ns
[    4.184196] Test 03:
[    4.185873]   Adding 50000 keys
[    4.352615]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.429709]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.430935]   Deleting 50000 keys
[    4.495747]   Duration of test: 309388507 ns
[    4.496514] Average test time: 308246501
[    4.497081] Testing concurrent rhashtable access from 10 threads
[    6.477246] rhashtable_thra (115) used greatest stack depth: 7180 bytes left
[    6.517719] rhashtable_thra (119) used greatest stack depth: 7056 bytes left
[    6.520376] Started 10 threads, 0 failed
[    6.522306] test_printf: all 260 tests passed
[    6.581456] test_bitmap: all 460506 tests passed
[    6.582208] test_uuid: all 18 tests passed
[    6.583201] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    6.583932] crc32: self tests passed, processed 225944 bytes in 176193 nsec
[    6.585109] crc32c: CRC_LE_BITS = 64
[    6.585632] crc32c: self tests passed, processed 225944 bytes in 88290 nsec
[    6.604518] crc32_combine: 8373 self tests passed
[    6.623147] crc32c_combine: 8373 self tests passed
[    6.624149] xz_dec_test: module loaded
[    6.624723] xz_dec_test: Create a device node with 'mknod xz_dec_test c 249 0' and write .xz files to it.
[    6.626145] rbtree testing -> 13705 cycles
[    7.176252] augmented rbtree testing -> 17269 cycles
[    7.873612] gpio_it87: no device
[    7.894869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.895699] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    7.896727] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
[    7.897691] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    7.898857] cpcihp_generic: not configured, disabling.
[    7.899661] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.900981] rivafb_setup START
[    7.901637] vmlfb: initializing
[    7.902140] Could not find Carillo Ranch MCH device.
[    7.902929] no IO addresses supplied
[    7.903644] hgafb: HGA card not detected.
[    7.904234] hgafb: probe of hgafb.0 failed with error -22
[    7.905188] usbcore: registered new interface driver smscufx
[    7.906086] hv_vmbus: registering driver hyperv_fb
[    7.906828] ipmi message handler version 39.2
[    7.907510] ipmi device interface
[    7.908096] IPMI System Interface driver.
[    7.908781] ipmi_si: Unable to find any System Interface(s)
[    7.909606] IPMI SSIF Interface driver
[    7.910171] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    7.911566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    7.912672] ACPI: Power Button [PWRF]
[    7.913728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    7.927408] ACPI: Power Button [PWRF]
[    7.928867] EINJ: EINJ table not found.
[    7.929462] ERST DBG: ERST support is disabled.
[    7.930297] isapnp: Scanning for PnP cards...
[    8.296773] isapnp: No Plug & Play device found
[    8.337559] HDLC line discipline maxframe=4096
[    8.351381] N_HDLC line discipline registered.
[    8.352120] r3964: Philips r3964 Driver $Revision: 1.10 $
[    8.353034] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    8.354235] serial 00:05: GPIO lookup for consumer cts
[    8.355155] serial 00:05: using ACPI for GPIO lookup
[    8.356002] acpi PNP0501:00: GPIO: looking up cts-gpios
[    8.356885] acpi PNP0501:00: GPIO: looking up cts-gpio
[    8.357793] acpi PNP0501:00: GPIO: looking up 0 in _CRS
[    8.358677] serial 00:05: using lookup tables for GPIO lookup
[    8.359600] serial 00:05: lookup for GPIO cts failed
[    8.360437] serial 00:05: GPIO lookup for consumer dsr
[    8.361350] serial 00:05: using ACPI for GPIO lookup
[    8.362190] acpi PNP0501:00: GPIO: looking up dsr-gpios
[    8.363071] acpi PNP0501:00: GPIO: looking up dsr-gpio
[    8.363936] serial 00:05: using lookup tables for GPIO lookup
[    8.364915] serial 00:05: lookup for GPIO dsr failed
[    8.365754] serial 00:05: GPIO lookup for consumer dcd
[    8.366618] serial 00:05: using ACPI for GPIO lookup
[    8.367450] acpi PNP0501:00: GPIO: looking up dcd-gpios
[    8.368362] acpi PNP0501:00: GPIO: looking up dcd-gpio
[    8.369214] serial 00:05: using lookup tables for GPIO lookup
[    8.370167] serial 00:05: lookup for GPIO dcd failed
[    8.370999] serial 00:05: GPIO lookup for consumer rng
[    8.371864] serial 00:05: using ACPI for GPIO lookup
[    8.372699] acpi PNP0501:00: GPIO: looking up rng-gpios
[    8.373573] acpi PNP0501:00: GPIO: looking up rng-gpio
[    8.374410] serial 00:05: using lookup tables for GPIO lookup
[    8.375334] serial 00:05: lookup for GPIO rng failed
[    8.376173] serial 00:05: GPIO lookup for consumer rts
[    8.377034] serial 00:05: using ACPI for GPIO lookup
[    8.377904] acpi PNP0501:00: GPIO: looking up rts-gpios
[    8.378787] acpi PNP0501:00: GPIO: looking up rts-gpio
[    8.379650] serial 00:05: using lookup tables for GPIO lookup
[    8.380615] serial 00:05: lookup for GPIO rts failed
[    8.381496] serial 00:05: GPIO lookup for consumer dtr
[    8.382322] serial 00:05: using ACPI for GPIO lookup
[    8.383106] acpi PNP0501:00: GPIO: looking up dtr-gpios
[    8.383969] acpi PNP0501:00: GPIO: looking up dtr-gpio
[    8.384846] serial 00:05: using lookup tables for GPIO lookup
[    8.385808] serial 00:05: lookup for GPIO dtr failed
[    8.414890] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.417162] console [ttyS0] disabled
[    0.000000] Linux version 4.8.0-rc4-00003-gbea5b15 (kbuild@lkp-nex05) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #2 SMP Sun Feb 26 03:35:36 CST 2017
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000170d1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000170d2000-0x00000000170fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x170d2 max_arch_pfn = 0x100000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b50-0x000f6b5f] mapped at [c00f6b50]
[    0.000000]   mpc: f6b60-f6c7c
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x033fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0308e000, 0x0308efff] PGTABLE
[    0.000000] BRK [0x0308f000, 0x0308ffff] PGTABLE
[    0.000000] BRK [0x03090000, 0x03090fff] PGTABLE
[    0.000000] BRK [0x03091000, 0x03091fff] PGTABLE
[    0.000000] BRK [0x03092000, 0x03092fff] PGTABLE
[    0.000000] BRK [0x03093000, 0x03093fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1588b000-0x170cffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6930 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000170E1936 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000170E180A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000170E0040 0017CA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000170E0000 000040
[    0.000000] ACPI: APIC 0x00000000170E187E 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000170E18FE 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 368MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 170d2000
[    0.000000]   low ram: 0 - 170d2000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:170d1001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 404998831 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x00000000170d1fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000170d1fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000170d1fff]
[    0.000000] On node 0 totalpages: 94320
[    0.000000] free_area_init_node: node 0, pgdat c1cd6140, node_mem_map d54ce020
[    0.000000]   Normal zone: 738 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 94320 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x17100000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 336 pages/cpu @d522e000 s1354560 r0 d21696 u1376256
[    0.000000] pcpu-alloc: s1354560 r0 d21696 u1376256 alloc=336*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 15230c40
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 93582
[    0.000000] Kernel command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw link=/kbuild-tests/run-queue/quantal-ivb41/i386-randconfig-h1-02252243/linux-devel:devel-spot-201702252217:bea5b158ff0da9c7246ff391f754f5f38e34577a:bisect-linux-39/.vmlinuz-bea5b158ff0da9c7246ff391f754f5f38e34577a-20170226034040-53-ivb41 branch=linux-devel/devel-spot-201702252217 BOOT_IMAGE=/pkg/linux/i386-randconfig-h1-02252243/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15 drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1908820 bytes of page_ext
[    0.000000] Memory: 310740K/377280K available (7245K kernel code, 1118K rwdata, 4796K rodata, 1964K init, 18120K bss, 66540K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     vmalloc : 0xd78d2000 - 0xfff14000   ( 646 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd70d2000   ( 368 MB)
[    0.000000]       .init : 0xc1cde000 - 0xc1ec9000   (1964 kB)
[    0.000000]       .data : 0xc1713a48 - 0xc1cdcb00   (5924 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1713a48   (7246 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:56 16
[    0.000000] CPU 0 irqstacks, hard=c0094000 soft=c0096000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5151 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2693.770 MHz processor
[    0.181693] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360)
[    0.182963] pid_max: default: 32768 minimum: 301
[    0.183728] ACPI: Core revision 20160422
[    0.187487] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.188474] 
[    0.188760] Security Framework initialized
[    0.189418] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190472] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.192028] CPU: Physical Processor ID: 0
[    0.192691] mce: CPU supports 10 MCE banks
[    0.193410] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.194195] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.195897] debug: unmapping init [mem 0xc1ec9000-0xc1ecdfff]
[    0.200331] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.201313] smpboot: APIC(1) Converting physical 1 to logical package 1
[    0.202280] smpboot: Max logical packages: 2
[    0.202933] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.203804] enabled ExtINT on CPU#0
[    0.205316] ENABLING IO-APIC IRQs
[    0.205824] init IO_APIC IRQs
[    0.206283]  apic 0 pin 0 not connected
[    0.206924] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.208103] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.209281] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.210484] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.211649] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.212827] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.214030] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.215195] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.216381] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.217583] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.218778] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.220017] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.221204] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.222404] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.223656] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.224833]  apic 0 pin 16 not connected
[    0.225416]  apic 0 pin 17 not connected
[    0.226005]  apic 0 pin 18 not connected
[    0.226588]  apic 0 pin 19 not connected
[    0.227197]  apic 0 pin 20 not connected
[    0.227780]  apic 0 pin 21 not connected
[    0.228363]  apic 0 pin 22 not connected
[    0.228935]  apic 0 pin 23 not connected
[    0.229689] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.231057] Using local APIC timer interrupts.
[    0.231057] calibrating APIC timer ...
[    0.336700] ... lapic delta = 6250601
[    0.337534] ... PM-Timer delta = 357999
[    0.338389] ... PM-Timer result ok
[    0.339141] ..... delta 6250601
[    0.339863] ..... mult: 268461295
[    0.340637] ..... calibration result: 3333653
[    0.341597] ..... CPU clock speed is 2694.0397 MHz.
[    0.342690] ..... host bus clock speed is 1000.0653 MHz.
[    0.343968] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)
[    0.345957] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.349326] CPU 1 irqstacks, hard=c0122000 soft=c0124000
[    0.350536] x86: Booting SMP configuration:
[    0.351485] .... node  #0, CPUs:      #1
[1266874889.304552] Initializing CPU#1
[    0.389901] kvm-clock: cpu 1, msr 0:170d1041, secondary cpu clock
[    0.390761] masked ExtINT on CPU#1
[    0.461461] KVM setup async PF for cpu 1
[    0.462042] kvm-stealtime: cpu 1, msr 15380c40
[    0.462871] x86: Booted up 1 node, 2 CPUs
[    0.463472] smpboot: Total of 2 processors activated (10778.95 BogoMIPS)
[    0.487718] devtmpfs: initialized
[    0.492103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.510688] prandom: seed boundary self test passed
[    0.512200] prandom: 100 self tests passed
[    0.512823] pinctrl core: initialized pinctrl subsystem
[    0.514064] regulator-dummy: Failed to create debugfs directory
[    0.524232] NET: Registered protocol family 16
[    0.537336] cpuidle: using governor ladder
[    0.584011] cpuidle: using governor menu
[    0.586397] ACPI: bus type PCI registered
[    0.587423] PCI: PCI BIOS revision 2.10 entry at 0xfd3e3, last bus=0
[    0.588360] PCI: Using configuration type 1 for base access
[    0.657774] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.659174] gpio-f7188x: Not a Fintek device at 0x0000002e
[    0.660034] gpio-f7188x: Not a Fintek device at 0x0000004e
[    0.661019] ACPI: Added _OSI(Module Device)
[    0.661647] ACPI: Added _OSI(Processor Device)
[    0.662295] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.663035] ACPI: Added _OSI(Processor Aggregator Device)
[    0.672972] ACPI: Interpreter enabled
[    0.673583] ACPI: (supports S0 S3 S5)
[    0.674135] ACPI: Using IOAPIC for interrupt routing
[    0.674928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.687884] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.688838] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.689663] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.690639] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.692469] PCI host bridge to bus 0000:00
[    0.693088] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.694078] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.695090] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.696158] pci_bus 0000:00: root bus resource [mem 0x17100000-0xfebfffff window]
[    0.697244] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.698145] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.699785] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.701624] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.729664] pci 0000:00:01.1: reg 0x20: [io  0xc200-0xc20f]
[    0.740729] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.741809] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.742757] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.743793] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.745227] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.746630] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.747689] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.749255] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.760310] pci 0000:00:02.0: reg 0x10: [mem 0xfa000000-0xfaffffff pref]
[    0.782248] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.827743] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.829432] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.840989] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.851718] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.903593] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.905242] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.922066] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.937242] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.981028] pci 0000:00:04.0: reg 0x20: [mem 0xfb000000-0xfb7fffff 64bit pref]
[    0.998338] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    1.013589] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    1.028962] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    1.072914] pci 0000:00:05.0: reg 0x20: [mem 0xfb800000-0xfbffffff 64bit pref]
[    1.089422] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[    1.104810] pci 0000:00:06.0: reg 0x10: [io  0xc0c0-0xc0ff]
[    1.119840] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
[    1.163235] pci 0000:00:06.0: reg 0x20: [mem 0xfc000000-0xfc7fffff 64bit pref]
[    1.179538] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[    1.194729] pci 0000:00:07.0: reg 0x10: [io  0xc100-0xc13f]
[    1.209859] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
[    1.253240] pci 0000:00:07.0: reg 0x20: [mem 0xfc800000-0xfcffffff 64bit pref]
[    1.269622] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[    1.284906] pci 0000:00:08.0: reg 0x10: [io  0xc140-0xc17f]
[    1.300029] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
[    1.343567] pci 0000:00:08.0: reg 0x20: [mem 0xfd000000-0xfd7fffff 64bit pref]
[    1.359844] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[    1.375095] pci 0000:00:09.0: reg 0x10: [io  0xc180-0xc1bf]
[    1.390089] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
[    1.433719] pci 0000:00:09.0: reg 0x20: [mem 0xfd800000-0xfdffffff 64bit pref]
[    1.450185] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000
[    1.465476] pci 0000:00:0a.0: reg 0x10: [io  0xc1c0-0xc1ff]
[    1.480490] pci 0000:00:0a.0: reg 0x14: [mem 0xfebf7000-0xfebf7fff]
[    1.524488] pci 0000:00:0a.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    1.541136] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000
[    1.547238] pci 0000:00:0b.0: reg 0x10: [mem 0xfebf8000-0xfebf800f]
[    1.577667] pci_bus 0000:00: on NUMA node 0
[    1.580508] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.581731] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.582888] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.584046] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.585121] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.586463] ACPI: Enabled 3 GPEs in block 00 to 0F
[    1.609381] ACPI: bus type USB registered
[    1.610060] usbcore: registered new interface driver usbfs
[    1.610895] usbcore: registered new interface driver hub
[    1.611704] usbcore: registered new device driver usb
[    1.612633] Linux video capture interface: v2.00
[    1.613334] pps_core: LinuxPPS API ver. 1 registered
[    1.614050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.615634] FPGA manager framework
[    1.616203] Advanced Linux Sound Architecture Driver Initialized.
[    1.617141] PCI: Using ACPI for IRQ routing
[    1.617761] PCI: pci_cache_line_size set to 64 bytes
[    1.618797] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.619678] e820: reserve RAM buffer [mem 0x170d2000-0x17ffffff]
[    1.622734] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.623548] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.644468] clocksource: Switched to clocksource kvm-clock
[    1.645396] VFS: Disk quotas dquot_6.6.0
[    1.684492] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.751208] FS-Cache: Loaded
[    1.787942] pnp: PnP ACPI init
[    1.788711] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.789885] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.791049] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.792048] pnp 00:03: [dma 2]
[    1.792587] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.793723] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.794940] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.796044] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.797681] pnp: PnP ACPI: found 7 devices
[    1.834544] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.835911] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.836817] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.837791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.838881] pci_bus 0000:00: resource 7 [mem 0x17100000-0xfebfffff window]
[    1.840088] NET: Registered protocol family 1
[    1.840836] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.841727] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.842597] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.843560] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.844911] PCI: CLS 0 bytes, default 64
[    1.845661] Unpacking initramfs...
[    2.830463] debug: unmapping init [mem 0xd588b000-0xd70cffff]
[    2.835707] Machine check injector initialized
[    2.836928] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    2.838085] apm: disabled - APM is not SMP safe.
[    2.838943] Scanning for low memory corruption every 60 seconds
[    2.851658] cryptomgr_test (30) used greatest stack depth: 7348 bytes left
[    2.854196] PCLMULQDQ-NI instructions are not detected.
[    2.855314] NatSemi SCx200 Driver
[    2.856000] spin_lock-torture:--- Start of test [debug]: nwriters_stress=4 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    2.858923] spin_lock-torture: Creating torture_shuffle task
[    2.859987] spin_lock-torture: Creating torture_stutter task
[    2.861013] spin_lock-torture: torture_stutter task started
[    2.862006] spin_lock-torture: Creating lock_torture_writer task
[    2.863097] spin_lock-torture: torture_shuffle task started
[    2.864094] spin_lock-torture: lock_torture_writer task started
[    2.876375] spin_lock-torture: Creating lock_torture_writer task
[    2.877477] spin_lock-torture: Creating lock_torture_writer task
[    2.878554] spin_lock-torture: lock_torture_writer task started
[    2.914468] spin_lock-torture: Creating lock_torture_writer task
[    2.915611] spin_lock-torture: Creating lock_torture_stats task
[    2.916657] spin_lock-torture: lock_torture_writer task started
[    2.927403] spin_lock-torture: lock_torture_writer task started
[    2.928619] torture_init_begin: Refusing rcu init: spin_lock running.
[    2.929647] torture_init_begin: One torture test at a time!
[    2.949403] spin_lock-torture: lock_torture_stats task started
[    2.968393] futex hash table entries: 512 (order: 3, 32768 bytes)
[    2.970063] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    3.077850] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    3.097814] fuse init (API version 7.25)
[    3.148210] orangefs_init: called with debug mask: :none: :0:
[    3.221330] orangefs: module version upstream loaded
[    3.227791] cryptomgr_test (84) used greatest stack depth: 7204 bytes left
[    3.235529] test_string_helpers: Running tests...
[    3.238376] test_hexdump: all 1184 tests passed
[    3.249408] test_firmware: interface ready
[    3.250149] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    3.251214] Test 00:
[    3.253035]   Adding 50000 keys
[    3.447165]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.536145]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.537539]   Deleting 50000 keys
[    3.642082]   Duration of test: 388487089 ns
[    3.642853] Test 01:
[    3.644507]   Adding 50000 keys
[    3.748125] Info: encountered resize
[    3.749908]   Traversal complete: counted=51198, nelems=50000, entries=50000, table-jumps=1
[    3.751117] Test failed: Total count mismatch ^^^
[    3.844540] tsc: Refined TSC clocksource calibration: 2693.504 MHz
[    3.845509] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d345dbcd4, max_idle_ns: 440795302414 ns
[    3.856290]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.857500]   Deleting 50000 keys
[    3.918739]   Duration of test: 273772134 ns
[    3.919510] Test 02:
[    3.921287]   Adding 50000 keys
[    4.041683]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.120059]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.121304]   Deleting 50000 keys
[    4.183115]   Duration of test: 261338276 ns
[    4.184196] Test 03:
[    4.185873]   Adding 50000 keys
[    4.352615]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.429709]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.430935]   Deleting 50000 keys
[    4.495747]   Duration of test: 309388507 ns
[    4.496514] Average test time: 308246501
[    4.497081] Testing concurrent rhashtable access from 10 threads
[    6.477246] rhashtable_thra (115) used greatest stack depth: 7180 bytes left
[    6.517719] rhashtable_thra (119) used greatest stack depth: 7056 bytes left
[    6.520376] Started 10 threads, 0 failed
[    6.522306] test_printf: all 260 tests passed
[    6.581456] test_bitmap: all 460506 tests passed
[    6.582208] test_uuid: all 18 tests passed
[    6.583201] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    6.583932] crc32: self tests passed, processed 225944 bytes in 176193 nsec
[    6.585109] crc32c: CRC_LE_BITS = 64
[    6.585632] crc32c: self tests passed, processed 225944 bytes in 88290 nsec
[    6.604518] crc32_combine: 8373 self tests passed
[    6.623147] crc32c_combine: 8373 self tests passed
[    6.624149] xz_dec_test: module loaded
[    6.624723] xz_dec_test: Create a device node with 'mknod xz_dec_test c 249 0' and write .xz files to it.
[    6.626145] rbtree testing -> 13705 cycles
[    7.176252] augmented rbtree testing -> 17269 cycles
[    7.873612] gpio_it87: no device
[    7.894869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.895699] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    7.896727] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
[    7.897691] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    7.898857] cpcihp_generic: not configured, disabling.
[    7.899661] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.900981] rivafb_setup START
[    7.901637] vmlfb: initializing
[    7.902140] Could not find Carillo Ranch MCH device.
[    7.902929] no IO addresses supplied
[    7.903644] hgafb: HGA card not detected.
[    7.904234] hgafb: probe of hgafb.0 failed with error -22
[    7.905188] usbcore: registered new interface driver smscufx
[    7.906086] hv_vmbus: registering driver hyperv_fb
[    7.906828] ipmi message handler version 39.2
[    7.907510] ipmi device interface
[    7.908096] IPMI System Interface driver.
[    7.908781] ipmi_si: Unable to find any System Interface(s)
[    7.909606] IPMI SSIF Interface driver
[    7.910171] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    7.911566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    7.912672] ACPI: Power Button [PWRF]
[    7.913728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    7.927408] ACPI: Power Button [PWRF]
[    7.928867] EINJ: EINJ table not found.
[    7.929462] ERST DBG: ERST support is disabled.
[    7.930297] isapnp: Scanning for PnP cards...
[    8.296773] isapnp: No Plug & Play device found
[    8.337559] HDLC line discipline maxframe=4096
[    8.351381] N_HDLC line discipline registered.
[    8.352120] r3964: Philips r3964 Driver $Revision: 1.10 $
[    8.353034] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    8.354235] serial 00:05: GPIO lookup for consumer cts
[    8.355155] serial 00:05: using ACPI for GPIO lookup
[    8.356002] acpi PNP0501:00: GPIO: looking up cts-gpios
[    8.356885] acpi PNP0501:00: GPIO: looking up cts-gpio
[    8.357793] acpi PNP0501:00: GPIO: looking up 0 in _CRS
[    8.358677] serial 00:05: using lookup tables for GPIO lookup
[    8.359600] serial 00:05: lookup for GPIO cts failed
[    8.360437] serial 00:05: GPIO lookup for consumer dsr
[    8.361350] serial 00:05: using ACPI for GPIO lookup
[    8.362190] acpi PNP0501:00: GPIO: looking up dsr-gpios
[    8.363071] acpi PNP0501:00: GPIO: looking up dsr-gpio
[    8.363936] serial 00:05: using lookup tables for GPIO lookup
[    8.364915] serial 00:05: lookup for GPIO dsr failed
[    8.365754] serial 00:05: GPIO lookup for consumer dcd
[    8.366618] serial 00:05: using ACPI for GPIO lookup
[    8.367450] acpi PNP0501:00: GPIO: looking up dcd-gpios
[    8.368362] acpi PNP0501:00: GPIO: looking up dcd-gpio
[    8.369214] serial 00:05: using lookup tables for GPIO lookup
[    8.370167] serial 00:05: lookup for GPIO dcd failed
[    8.370999] serial 00:05: GPIO lookup for consumer rng
[    8.371864] serial 00:05: using ACPI for GPIO lookup
[    8.372699] acpi PNP0501:00: GPIO: looking up rng-gpios
[    8.373573] acpi PNP0501:00: GPIO: looking up rng-gpio
[    8.374410] serial 00:05: using lookup tables for GPIO lookup
[    8.375334] serial 00:05: lookup for GPIO rng failed
[    8.376173] serial 00:05: GPIO lookup for consumer rts
[    8.377034] serial 00:05: using ACPI for GPIO lookup
[    8.377904] acpi PNP0501:00: GPIO: looking up rts-gpios
[    8.378787] acpi PNP0501:00: GPIO: looking up rts-gpio
[    8.379650] serial 00:05: using lookup tables for GPIO lookup
[    8.380615] serial 00:05: lookup for GPIO rts failed
[    8.381496] serial 00:05: GPIO lookup for consumer dtr
[    8.382322] serial 00:05: using ACPI for GPIO lookup
[    8.383106] acpi PNP0501:00: GPIO: looking up dtr-gpios
[    8.383969] acpi PNP0501:00: GPIO: looking up dtr-gpio
[    8.384846] serial 00:05: using lookup tables for GPIO lookup
[    8.385808] serial 00:05: lookup for GPIO dtr failed
[    8.414890] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.417162] console [ttyS0] disabled
[    8.417884] serial 00:05: GPIO lookup for consumer cts
[    8.417915] serial 00:05: using ACPI for GPIO lookup
[    8.417919] acpi PNP0501:00: GPIO: looking up cts-gpios
[    8.417922] acpi PNP0501:00: GPIO: looking up cts-gpio
[    8.417926] acpi PNP0501:00: GPIO: looking up 0 in _CRS
[    8.417952] serial 00:05: using lookup tables for GPIO lookup
[    8.417956] serial 00:05: lookup for GPIO cts failed
[    8.417958] serial 00:05: GPIO lookup for consumer dsr
[    8.417960] serial 00:05: using ACPI for GPIO lookup
[    8.417963] acpi PNP0501:00: GPIO: looking up dsr-gpios
[    8.417965] acpi PNP0501:00: GPIO: looking up dsr-gpio
[    8.417968] serial 00:05: using lookup tables for GPIO lookup
[    8.417971] serial 00:05: lookup for GPIO dsr failed
[    8.417973] serial 00:05: GPIO lookup for consumer dcd
[    8.417975] serial 00:05: using ACPI for GPIO lookup
[    8.417978] acpi PNP0501:00: GPIO: looking up dcd-gpios
[    8.417980] acpi PNP0501:00: GPIO: looking up dcd-gpio
[    8.417983] serial 00:05: using lookup tables for GPIO lookup
[    8.417985] serial 00:05: lookup for GPIO dcd failed
[    8.417987] serial 00:05: GPIO lookup for consumer rng
[    8.417990] serial 00:05: using ACPI for GPIO lookup
[    8.417992] acpi PNP0501:00: GPIO: looking up rng-gpios
[    8.417994] acpi PNP0501:00: GPIO: looking up rng-gpio
[    8.417997] serial 00:05: using lookup tables for GPIO lookup
[    8.417999] serial 00:05: lookup for GPIO rng failed
[    8.418002] serial 00:05: GPIO lookup for consumer rts
[    8.418003] serial 00:05: using ACPI for GPIO lookup
[    8.418006] acpi PNP0501:00: GPIO: looking up rts-gpios
[    8.418008] acpi PNP0501:00: GPIO: looking up rts-gpio
[    8.418011] serial 00:05: using lookup tables for GPIO lookup
[    8.418014] serial 00:05: lookup for GPIO rts failed
[    8.418016] serial 00:05: GPIO lookup for consumer dtr
[    8.418018] serial 00:05: using ACPI for GPIO lookup
[    8.418020] acpi PNP0501:00: GPIO: looking up dtr-gpios
[    8.418023] acpi PNP0501:00: GPIO: looking up dtr-gpio
[    8.418025] serial 00:05: using lookup tables for GPIO lookup
[    8.418028] serial 00:05: lookup for GPIO dtr failed
[    8.446263] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.903286] console [ttyS0] enabled
[    8.904098] serial 00:06: GPIO lookup for consumer cts
[    8.904864] serial 00:06: using ACPI for GPIO lookup
[    8.905541] acpi PNP0501:01: GPIO: looking up cts-gpios
[    8.906236] acpi PNP0501:01: GPIO: looking up cts-gpio
[    8.906927] acpi PNP0501:01: GPIO: looking up 0 in _CRS
[    8.907661] serial 00:06: using lookup tables for GPIO lookup
[    8.908441] serial 00:06: lookup for GPIO cts failed
[    8.909141] serial 00:06: GPIO lookup for consumer dsr
[    8.909835] serial 00:06: using ACPI for GPIO lookup
[    8.910503] acpi PNP0501:01: GPIO: looking up dsr-gpios
[    8.911210] acpi PNP0501:01: GPIO: looking up dsr-gpio
[    8.911918] serial 00:06: using lookup tables for GPIO lookup
[    8.912736] serial 00:06: lookup for GPIO dsr failed
[    8.913405] serial 00:06: GPIO lookup for consumer dcd
[    8.914082] serial 00:06: using ACPI for GPIO lookup
[    8.914775] acpi PNP0501:01: GPIO: looking up dcd-gpios
[    8.915484] acpi PNP0501:01: GPIO: looking up dcd-gpio
[    8.916166] serial 00:06: using lookup tables for GPIO lookup
[    8.916969] serial 00:06: lookup for GPIO dcd failed
[    8.917639] serial 00:06: GPIO lookup for consumer rng
[    8.918328] serial 00:06: using ACPI for GPIO lookup
[    8.918993] acpi PNP0501:01: GPIO: looking up rng-gpios
[    8.919691] acpi PNP0501:01: GPIO: looking up rng-gpio
[    8.920376] serial 00:06: using lookup tables for GPIO lookup
[    8.921186] serial 00:06: lookup for GPIO rng failed
[    8.921866] serial 00:06: GPIO lookup for consumer rts
[    8.922559] serial 00:06: using ACPI for GPIO lookup
[    8.923225] acpi PNP0501:01: GPIO: looking up rts-gpios
[    8.923936] acpi PNP0501:01: GPIO: looking up rts-gpio
[    8.924668] serial 00:06: using lookup tables for GPIO lookup
[    8.925438] serial 00:06: lookup for GPIO rts failed
[    8.926098] serial 00:06: GPIO lookup for consumer dtr
[    8.926787] serial 00:06: using ACPI for GPIO lookup
[    8.927470] acpi PNP0501:01: GPIO: looking up dtr-gpios
[    8.928226] acpi PNP0501:01: GPIO: looking up dtr-gpio
[    8.928821] serial 00:06: using lookup tables for GPIO lookup
[    8.929366] serial 00:06: lookup for GPIO dtr failed
[    8.958892] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    8.961034] serial 00:06: GPIO lookup for consumer cts
[    8.962002] serial 00:06: using ACPI for GPIO lookup
[    8.962822] acpi PNP0501:01: GPIO: looking up cts-gpios
[    8.963673] acpi PNP0501:01: GPIO: looking up cts-gpio
[    8.964610] acpi PNP0501:01: GPIO: looking up 0 in _CRS
[    8.965591] serial 00:06: using lookup tables for GPIO lookup
[    8.966559] serial 00:06: lookup for GPIO cts failed
[    8.967295] serial 00:06: GPIO lookup for consumer dsr
[    8.968202] serial 00:06: using ACPI for GPIO lookup
[    8.969108] acpi PNP0501:01: GPIO: looking up dsr-gpios
[    8.970049] acpi PNP0501:01: GPIO: looking up dsr-gpio
[    8.970899] serial 00:06: using lookup tables for GPIO lookup
[    8.971868] serial 00:06: lookup for GPIO dsr failed
[    8.972714] serial 00:06: GPIO lookup for consumer dcd
[    8.973485] serial 00:06: using ACPI for GPIO lookup
[    8.974252] acpi PNP0501:01: GPIO: looking up dcd-gpios
[    8.975152] acpi PNP0501:01: GPIO: looking up dcd-gpio
[    8.976119] serial 00:06: using lookup tables for GPIO lookup
[    8.976984] serial 00:06: lookup for GPIO dcd failed
[    8.977784] serial 00:06: GPIO lookup for consumer rng
[    8.978570] serial 00:06: using ACPI for GPIO lookup
[    8.979360] acpi PNP0501:01: GPIO: looking up rng-gpios
[    8.980180] acpi PNP0501:01: GPIO: looking up rng-gpio
[    8.980957] serial 00:06: using lookup tables for GPIO lookup
[    8.981998] serial 00:06: lookup for GPIO rng failed
[    8.982917] serial 00:06: GPIO lookup for consumer rts
[    8.983713] serial 00:06: using ACPI for GPIO lookup
[    8.984615] acpi PNP0501:01: GPIO: looking up rts-gpios
[    8.985561] acpi PNP0501:01: GPIO: looking up rts-gpio
[    8.986486] serial 00:06: using lookup tables for GPIO lookup
[    8.987514] serial 00:06: lookup for GPIO rts failed
[    8.988411] serial 00:06: GPIO lookup for consumer dtr
[    8.989304] serial 00:06: using ACPI for GPIO lookup
[    8.990056] acpi PNP0501:01: GPIO: looking up dtr-gpios
[    8.990894] acpi PNP0501:01: GPIO: looking up dtr-gpio
[    8.991712] serial 00:06: using lookup tables for GPIO lookup
[    8.992717] serial 00:06: lookup for GPIO dtr failed
[    9.020624] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    9.024357] Cyclades driver 2.6
[    9.045199] MOXA Intellio family driver version 6.0k
[    9.046129] MOXA Smartio/Industio family driver version 2.0.5
[    9.047149] SyncLink MultiPort driver $Revision: 4.38 $
[    9.061292] SyncLink MultiPort driver $Revision: 4.38 $, tty major#243
[    9.062418] SyncLink serial driver $Revision: 4.38 $
[    9.076239] SyncLink serial driver $Revision: 4.38 $, tty major#242
[    9.077466] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    9.078696] ac.o: No PCI boards found.
[    9.079337] ac.o: For an ISA board you must supply memory and irq parameters.
[    9.081001] Non-volatile memory driver v1.3
[    9.081905] scx200_gpio: no SCx200 gpio present
[    9.082799] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    9.084022] platform pc8736x_gpio.0: no device found
[    9.085019] nsc_gpio initializing
[    9.085629] smapi::smapi_init, ERROR invalid usSmapiID
[    9.086513] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    9.088098] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    9.089298] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    9.090351] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    9.091908] Failed to find cpu0 device node
[    9.092664] Unable to detect cache hierarchy from DT for CPU 0
[    9.093774] Phantom Linux Driver, version n0.9.8, init OK
[    9.095108] Guest personality initialized and is inactive
[    9.096167] VMCI host device registered (name=vmci, major=10, minor=62)
[    9.097307] Initialized host personality
[    9.098794] usbcore: registered new interface driver viperboard
[    9.099916] usbcore: registered new interface driver dln2
[    9.101141] mtdoops: mtd device (mtddev=name/number) must be supplied
[    9.102193] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    9.103481] device id = 2440
[    9.103990] device id = 2480
[    9.104553] device id = 24c0
[    9.105059] device id = 24d0
[    9.105571] device id = 25a1
[    9.106073] device id = 2670
[    9.106583] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver
[    9.107757] slram: not enough parameters.
[    9.108458] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    9.109689] pmc551: not detected
[    9.144969] No valid DiskOnChip devices found
[    9.148284] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.149841] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.151385] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.152948] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.154561] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.156117] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.157617] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[    9.158688] nand: Toshiba NAND 128MiB 1,8V 8-bit
[    9.159475] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    9.160771] flash size: 128 MiB
[    9.161328] page size: 512 bytes
[    9.161893] OOB area size: 16 bytes
[    9.162496] sector size: 16 KiB
[    9.163032] pages number: 262144
[    9.163560] pages per sector: 32
[    9.164080] bus width: 8
[    9.164508] bits in sector size: 14
[    9.165103] bits in page size: 9
[    9.165658] bits in OOB size: 4
[    9.166190] flash size with OOB: 135168 KiB
[    9.166896] page address bytes: 4
[    9.167496] sector address bytes: 3
[    9.168099] options: 0x42
[    9.181144] Scanning device for bad blocks
[    9.211699] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[    9.212693] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[    9.222732] HSI/SSI char device loaded
[    9.223842] usbcore: registered new interface driver hwa-rc
[    9.224778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.225716] ehci-pci: EHCI PCI platform driver
[    9.226349] ehci-platform: EHCI generic platform driver
[    9.227080] uhci_hcd: USB Universal Host Controller Interface driver
[    9.228086] usbcore: registered new interface driver hwa-hc
[    9.229044] usbcore: registered new interface driver wusb-cbaf
[    9.229927] usbcore: registered new interface driver cdc_acm
[    9.230690] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.231783] usbcore: registered new interface driver mdc800
[    9.232639] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    9.233670] usbcore: registered new interface driver adutux
[    9.234549] usbcore: registered new interface driver appledisplay
[    9.235421] usbcore: registered new interface driver cypress_cy7c63
[    9.236318] usbcore: registered new interface driver idmouse
[    9.236890] usbcore: registered new interface driver iowarrior
[    9.237460] usbcore: registered new interface driver legousbtower
[    9.238055] usbcore: registered new interface driver usbsevseg
[    9.238630] usbcore: registered new interface driver yurex
[    9.239197] usbcore: registered new interface driver chaoskey
[    9.239779] usbcore: registered new interface driver sisusb
[    9.240503] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    9.241247] dummy_hcd dummy_hcd.0: Dummy host controller
[    9.241780] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    9.242658] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.243300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.243979] usb usb1: Product: Dummy host controller
[    9.244493] usb usb1: Manufacturer: Linux 4.8.0-rc4-00003-gbea5b15 dummy_hcd
[    9.245150] usb usb1: SerialNumber: dummy_hcd.0
[    9.245963] hub 1-0:1.0: USB hub found
[    9.246372] hub 1-0:1.0: 1 port detected
[    9.247020] hub 1-0:1.0: USB hub found
[    9.247421] hub 1-0:1.0: 1 port detected
[    9.248363] hub 1-0:1.0: USB hub found
[    9.248754] hub 1-0:1.0: 1 port detected
[    9.249265] hub 1-0:1.0: USB hub found
[    9.249665] hub 1-0:1.0: 1 port detected
[    9.250207] dummy_hcd dummy_hcd.0: remove, state 1
[    9.250710] usb usb1: USB disconnect, device number 1
[    9.251847] dummy_hcd dummy_hcd.0: stopped
[    9.252280] dummy_hcd dummy_hcd.0: USB bus 1 deregistered
[    9.252845] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    9.253539] dummy_hcd dummy_hcd.0: Dummy host controller
[    9.254042] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    9.254862] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.255515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.256216] usb usb1: Product: Dummy host controller
[    9.256701] usb usb1: Manufacturer: Linux 4.8.0-rc4-00003-gbea5b15 dummy_hcd
[    9.257365] usb usb1: SerialNumber: dummy_hcd.0
[    9.258106] hub 1-0:1.0: USB hub found
[    9.258497] hub 1-0:1.0: 1 port detected
[    9.259013] hub 1-0:1.0: USB hub found
[    9.259405] hub 1-0:1.0: 1 port detected
[    9.260111] hub 1-0:1.0: USB hub found
[    9.260542] hub 1-0:1.0: 1 port detected
[    9.261049] hub 1-0:1.0: USB hub found
[    9.261458] hub 1-0:1.0: 1 port detected
[    9.262388] kobject (cf9188bc): tried to init an initialized object, something is seriously wrong.
[    9.263589] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc4-00003-gbea5b15 #2
[    9.264595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    9.265922]  00000000 00000000 c0047db4 c11aec39 cf9188bc c1c1ba9c c0047dcc c11b0616
[    9.267073]  c1ab0c68 cf9188bc cf9188b4 cf918868 c0047dd8 c13090ec cf9188b4 c0047de4
[    9.268230]  c130a49e ce6a8000 c0047e04 c1402216 ce69300c 00200246 cf9188b4 cf918000
[    9.269388] Call Trace:
[    9.269720]  [<c11aec39>] dump_stack+0x58/0x72
[    9.270312]  [<c11b0616>] kobject_init+0x27/0x71
[    9.270929]  [<c13090ec>] device_initialize+0x1b/0xbd
[    9.271599]  [<c130a49e>] device_register+0xb/0x15
[    9.272236]  [<c1402216>] usb_add_gadget_udc_release+0x85/0x215
[    9.273036]  [<c1402403>] usb_add_gadget_udc+0xa/0xc
[    9.273700]  [<c1403f37>] dummy_udc_probe+0x130/0x168
[    9.274377]  [<c130cf05>] platform_drv_probe+0x44/0x80
[    9.275047]  [<c130bef3>] driver_probe_device+0xfe/0x297
[    9.275748]  [<c130c17a>] __device_attach_driver+0x65/0x71
[    9.276481]  [<c130add0>] bus_for_each_drv+0x3a/0x67
[    9.277130]  [<c130bd02>] __device_attach+0x86/0xdb
[    9.277778]  [<c130c115>] ? driver_allows_async_probing+0xc/0xc
[    9.278561]  [<c130c28a>] device_initial_probe+0xd/0xf
[    9.279235]  [<c130af4f>] bus_probe_device+0x25/0x67
[    9.279895]  [<c130a33d>] device_add+0x341/0x497
[    9.280517]  [<c130930f>] ? dev_set_name+0x14/0x16
[    9.281154]  [<c130d4c5>] platform_device_add+0x117/0x161
[    9.281879]  [<c1d18945>] init+0x20d/0x2f4
[    9.282431]  [<c1d18738>] ? usb_udc_init+0x3f/0x3f
[    9.283075]  [<c1cdeba3>] do_one_initcall+0x7e/0xfc
[    9.283725]  [<c1056209>] ? parse_args+0x19b/0x26f
[    9.284362]  [<c1cded68>] ? kernel_init_freeable+0x147/0x1eb
[    9.285100]  [<c1cded84>] kernel_init_freeable+0x163/0x1eb
[    9.285826]  [<c170d049>] kernel_init+0x8/0xd0
[    9.286417]  [<c17122e2>] ret_from_kernel_thread+0xe/0x24
[    9.287118]  [<c170d041>] ? rest_init+0xa5/0xa5
[    9.288532] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    9.290663] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.291372] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.293351] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.294031] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.294915] hv_vmbus: registering driver hyperv_keyboard
[    9.353464] mousedev: PS/2 mouse device common for all mice
[    9.354154] usbcore: registered new interface driver iforce
[    9.355124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio2/input/input2
[    9.356453] usbcore: registered new interface driver xpad
[    9.357021] usbcore: registered new interface driver gtco
[    9.357560] usbcore: registered new interface driver hanwang
[    9.358167] usbcore: registered new interface driver kbtab
[    9.358729] usbcore: registered new interface driver pegasus_notetaker
[    9.359439] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[    9.360098] cm109: Keymap for Komunikate KIP1000 phone loaded
[    9.360672] usbcore: registered new interface driver cm109
[    9.361231] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    9.362116] usbcore: registered new interface driver ims_pcu
[    9.362716] usbcore: registered new interface driver keyspan_remote
[    9.363352] usbcore: registered new interface driver powermate
[    9.364084] wistron_btns: System unknown
[    9.366583] usbcore: registered new interface driver yealink
[    9.367722] rtc_cmos 00:00: RTC can wake from S4
[    9.369044] rtc rtc0: alarm rollover: day
[    9.369753] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    9.370941] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    9.372022] rtc_cmos 00:00: RTC can wake from S4
[    9.381872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio2/input/input3
[    9.417862] rtc_cmos: probe of 00:00 failed with error -16
[    9.419403] rtc rtc1: alarm rollover: day
[    9.420018] rtc-test rtc-test.0: rtc core: registered test as rtc1
[    9.421070] rtc rtc1: alarm rollover: day
[    9.421701] rtc-test rtc-test.0: rtc core: registered test as rtc1
[    9.422672] rtc rtc2: alarm rollover: day
[    9.423277] rtc-test rtc-test.1: rtc core: registered test as rtc2
[    9.424219] rtc rtc2: alarm rollover: day
[    9.424864] rtc-test rtc-test.1: rtc core: registered test as rtc2
[    9.425812] i2c /dev entries driver
[    9.426889] i2c-parport-light: adapter type unspecified
[    9.427620] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    9.428803] usbcore: registered new interface driver i2c-tiny-usb
[    9.429698] isa i2c-pca-isa.0: Please specify I/O base
[    9.431213] saa7146: register extension 'Multimedia eXtension Board'
[    9.432135] saa7146: register extension 'hexium gemini'
[    9.432915] cx25821: driver version 0.0.106 loaded
[    9.433596] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
[    9.434569] usbcore: registered new interface driver hdpvr
[    9.435428] usbcore: registered new interface driver pvrusb2
[    9.436216] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
[    9.437247] pvrusb2: Debug mask is 31 (0x1f)
[    9.437859] usbcore: registered new interface driver usbvision
[    9.438631] USBVision USB Video Device Driver for Linux : 0.9.11
[    9.440073] radio-aztech.0: Initialized radio card Aztech Radio on port 0x350
[    9.443070] : Removed radio card Aztech Radio
[    9.444381] radio-aztech.0: Initialized radio card Aztech Radio on port 0x350
[    9.445478] radio-sf16fmi: no cards found
[    9.467810] ------------[ cut here ]------------
[    9.468499] WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb+0x62/0x3be
[    9.469853] URB ce695900 submitted while active
[    9.470474] CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 4.8.0-rc4-00003-gbea5b15 #2
[    9.471503] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    9.472919] Workqueue: pm pm_runtime_work
[    9.473479]  c1080351 00000000 c01c5d08 c11aec39 c01c5d34 c13b1208 c01c5d20 c1042123
[    9.474678]  00000152 ce695900 ce6a6c00 00000002 c01c5d3c c1042162 00000009 00000000
[    9.475870]  c01c5d34 c1b12352 c01c5d50 c01c5d78 c13b1208 c1b12371 00000152 c1b12352
[    9.477065] Call Trace:
[    9.477409]  [<c1080351>] ? console_unlock+0x426/0x503
[    9.478127]  [<c11aec39>] dump_stack+0x58/0x72
[    9.478728]  [<c13b1208>] ? usb_submit_urb+0x62/0x3be
[    9.479405]  [<c1042123>] __warn+0xad/0xc4
[    9.479951]  [<c1042162>] warn_slowpath_fmt+0x28/0x2d
[    9.480660]  [<c13b1208>] usb_submit_urb+0x62/0x3be
[    9.481347]  [<c13aa33c>] ? usb_clear_port_feature+0x2e/0x33
[    9.482100]  [<c13ab0c6>] hub_activate+0x428/0x492
[    9.482742]  [<c13ab1ab>] hub_resume+0x13/0x17
[    9.483332]  [<c13b3a9b>] usb_resume_interface+0x92/0xb6
[    9.484116]  [<c13b3bbc>] usb_suspend_both+0xfd/0x15c
[    9.484855]  [<c13b4bde>] ? usb_autopm_get_interface_no_resume+0x22/0x22
[    9.485745]  [<c13b4bff>] usb_runtime_suspend+0x21/0x52
[    9.486445]  [<c1312e8b>] __rpm_callback+0x2b/0x4b
[    9.487078]  [<c13b4bde>] ? usb_autopm_get_interface_no_resume+0x22/0x22
[    9.487991]  [<c1312ef1>] rpm_callback+0x46/0x64
[    9.488669]  [<c13b4bde>] ? usb_autopm_get_interface_no_resume+0x22/0x22
[    9.489557]  [<c13137e7>] rpm_suspend+0x204/0x342
[    9.490185]  [<c1711c1c>] ? _raw_spin_lock_irqsave+0x5d/0x67
[    9.490942]  [<c1313c32>] __pm_runtime_suspend+0x4b/0x6c
[    9.491683]  [<c13b4c42>] ? usb_runtime_resume+0x12/0x12
[    9.492419]  [<c13b4c60>] usb_runtime_idle+0x1e/0x26
[    9.493071]  [<c1312e8b>] __rpm_callback+0x2b/0x4b
[    9.493711]  [<c13139ee>] rpm_idle+0xc9/0x107
[    9.494288]  [<c1313bbd>] pm_runtime_work+0x54/0x7e
[    9.494970]  [<c10520ce>] process_one_work+0x1c7/0x351
[    9.495661]  [<c1052076>] ? process_one_work+0x16f/0x351
[    9.496402]  [<c10524b0>] worker_thread+0x234/0x31c
[    9.497047]  [<c105227c>] ? process_scheduled_works+0x24/0x24
[    9.497841]  [<c1056594>] kthread+0xa9/0xae
[    9.498404]  [<c17122e2>] ret_from_kernel_thread+0xe/0x24
[    9.499119]  [<c10564eb>] ? __kthread_unpark+0x4f/0x4f
[    9.499832] ---[ end trace f70d4e126f7ee0ff ]---
[    9.500496] hub 1-0:1.0: activate --> -16
[    9.614479] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[    9.784471] usb 1-1: unable to read config index 0 descriptor/start: -32
[    9.785410] usb 1-1: chopping to 0 config(s)
[    9.785992] usb 1-1: New USB device found, idVendor=0525, idProduct=c0de
[    9.786903] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.788138] usb 1-1: no configuration chosen from 0 choices
[    9.788931] usb 1-1: no configuration chosen from 0 choices
[   12.862370] radio-typhoon.0: Initialized radio card Typhoon Radio on port 0x316
[   12.863600] : Removed radio card Typhoon Radio
[   12.864505] radio-typhoon.0: Initialized radio card Typhoon Radio on port 0x316
[   12.865992] radio-terratec.0: Initialized radio card TerraTec ActiveRadio on port 0x590
[   12.867275] : Removed radio card TerraTec ActiveRadio
[   12.868416] radio-terratec.0: Initialized radio card TerraTec ActiveRadio on port 0x590
[   12.869523] usbcore: registered new interface driver radioshark2
[   12.899514] radio-zoltrix.0: Initialized radio card Zoltrix Radio Plus on port 0x20c
[   12.900713] : Removed radio card Zoltrix Radio Plus
[   12.940789] radio-zoltrix.0: Initialized radio card Zoltrix Radio Plus on port 0x20c
[   12.943687] radio-gemtek.0: Initialized radio card GemTek Radio on port 0x34c
[   12.946803] : Removed radio card GemTek Radio
[   12.948499] radio-gemtek.0: Initialized radio card GemTek Radio on port 0x34c
[   12.950302] : you must load the snd-miro driver first!
[   12.951319] usbcore: registered new interface driver radio-si470x
[   12.952392] usbcore: registered new interface driver radio-keene
[   12.953535] usbcore: registered new interface driver radio-ma901
[   12.955661] usbcore: registered new interface driver radio-raremono
[   12.957041] pps pps0: new PPS source ktimer
[   12.957795] pps pps0: ktimer PPS source registered
[   12.958610] Driver for 1-wire Dallas network protocol.
[   12.959756] usbcore: registered new interface driver DS9490R
[   12.960691] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[   12.962701] w83781d: Detection failed at step 2
[   12.964126] f71882fg: Not a Fintek device
[   12.964892] f71882fg: Not a Fintek device
[   12.967137] pc87360: PC8736x not detected, module not inserted
[   12.968362] sch56xx_common: Unsupported device id: 0xff
[   12.969271] sch56xx_common: Unsupported device id: 0xff
[   12.970760] pcwd: Port 0x0350 unavailable
[   12.971844] mixcomwd: No card detected, or port not available
[   12.972958] usbcore: registered new interface driver pcwd_usb
[   12.973993] acquirewdt: WDT driver for Acquire single board computer initialising
[   12.975520] acquirewdt: I/O address 0x0043 already in use
[   12.976483] acquirewdt: probe of acquirewdt failed with error -5
[   12.977564] advantechwdt: WDT driver for Advantech single board computer initialising
[   12.979209] advantechwdt: initialized. timeout=60 sec (nowayout=0)
[   12.980677] advantechwdt: initialized. timeout=60 sec (nowayout=0)
[   12.983339] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[   12.984736] wafer5823wdt: I/O address 0x0443 already in use
[   12.985679] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.986891] sc1200wdt: build 20020303
[   12.987554] sc1200wdt: io parameter must be specified
[   12.988438] pc87413_wdt: Version 1.1 at io 0x2E
[   12.989200] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[   12.990415] sbc60xxwdt: I/O address 0x0443 already in use
[   12.991351] sbc8360: failed to register misc device
[   12.992173] sbc7240_wdt: I/O address 0x0443 already in use
[   12.993067] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[   12.995575] smsc37b787_wdt: Unable to register miscdev on minor 130
[   12.996715] w83877f_wdt: I/O address 0x0443 already in use
[   12.997647] w83977f_wdt: driver v1.00
[   12.998319] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[   12.999478] machzwd: MachZ ZF-Logic Watchdog driver initializing
[   13.000570] machzwd: no ZF-Logic found
[   13.001448] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[   13.002806] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[   13.004406] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[   13.005904] cpufreq_nforce2: No nForce2 chipset
[   13.006904] sdhci: Secure Digital Host Controller Interface driver
[   13.007962] sdhci: Copyright(c) Pierre Ossman
[   13.008748] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   13.009679] wbsd: Copyright(c) Pierre Ossman
[   13.010623] usbcore: registered new interface driver ushc
[   13.011654] sdhci-pltfm: SDHCI platform and OF driver helper
[   13.013793] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   13.015305] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   13.061252] fw_cfg: probe of QEMU0002:00 failed with error -16
[   13.062298] cs5535-clockevt: Could not allocate MFGPT timer
[   13.070541] usbcore: registered new interface driver usbhid
[   13.071572] usbhid: USB HID core driver
[   13.072405] no options.
[   13.088003] ashmem: initialized
[   13.088599] mostcore: init()
[   13.089165] aim_sound: init()
[   13.089602] mostcore: registered new application interfacing module sound
[   13.090552] mostcore: registered new application interfacing module v4l
[   13.091865] cros_ec_lpc: unsupported system.
[   13.094582] Software Queue-Pair Transport over NTB, version 4
[   13.095706] CHRDEV "dummy_stm.0" major number 233 goes below the dynamic allocation range
[   13.097206] CHRDEV "dummy_stm.1" major number 232 goes below the dynamic allocation range
[   13.098749] CHRDEV "dummy_stm.2" major number 231 goes below the dynamic allocation range
[   13.100180] CHRDEV "dummy_stm.3" major number 230 goes below the dynamic allocation range
[   13.110007] Motu MidiTimePiece on parallel port irq: 7 ioport: 0x378
[   13.113846] Motu MidiTimePiece on parallel port irq: 7 ioport: 0x378
[   13.115269] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   13.117147] PCSP: CONFIG_DEBUG_PAGEALLOC is enabled, which may make the sound noisy.
[   13.119383] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   13.121311] PCSP: CONFIG_DEBUG_PAGEALLOC is enabled, which may make the sound noisy.
[   13.122758] isa adlib.0: please specify port
[   13.126654] ALSA wss_lib.c:1824 wss: can't grab port 0x608
[   13.127634] cmi8328: probe of cmi8328.3 failed with error -16
[   13.136667] sc6000: specify IO port
[   13.139944] isa ad1848.0: please specify port
[   13.145967] isa azt2316.0: please specify port
[   13.149634] ALSA gusclassic.c:133 [0x220] check 1 failed - 0xff
[   13.215614] ALSA gusmax.c:91 [0x220] check 1 failed - 0xff
[   13.282451] ALSA es1688_lib.c:113 ess_reset at 0x220: failed!!!
[   13.283523] ALSA es1688_lib.c:145 ESS: [0x220] reset failed... 0xff
[   13.341369] snd_es1688_dsp_command: timeout (0xc0)
[   13.398949] snd_es1688_dsp_command: timeout (0xc0)
[   13.456292] snd_es1688_dsp_command: timeout (0xb1)
[   13.515276] snd_es1688_dsp_command: timeout (0xb2)
[   13.572801] snd_es1688_dsp_command: timeout (0xc0)
[   13.630179] snd_es1688_dsp_command: timeout (0xc0)
[   13.631100] ALSA es1688_lib.c:113 ess_reset at 0x220: failed!!!
[   13.632509] ALSA es1688_lib.c:113 ess_reset at 0x240: failed!!!
[   13.633536] ALSA es1688_lib.c:145 ESS: [0x240] reset failed... 0xff
[   13.691453] snd_es1688_dsp_command: timeout (0xc0)
[   13.748911] snd_es1688_dsp_command: timeout (0xc0)
[   13.806771] snd_es1688_dsp_command: timeout (0xb1)
[   13.857458] snd_es1688_dsp_command: timeout (0xb2)
[   13.912781] snd_es1688_dsp_command: timeout (0xc0)
[   13.967893] snd_es1688_dsp_command: timeout (0xc0)
[   13.968765] ALSA es1688_lib.c:113 ess_reset at 0x240: failed!!!
[   13.970083] ALSA es1688_lib.c:113 ess_reset at 0x260: failed!!!
[   13.971084] ALSA es1688_lib.c:145 ESS: [0x260] reset failed... 0xff
[   14.026524] snd_es1688_dsp_command: timeout (0xc0)
[   14.083200] snd_es1688_dsp_command: timeout (0xc0)
[   14.138795] snd_es1688_dsp_command: timeout (0xb1)
[   14.194098] snd_es1688_dsp_command: timeout (0xb2)
[   14.245320] snd_es1688_dsp_command: timeout (0xc0)
[   14.302898] snd_es1688_dsp_command: timeout (0xc0)
[   14.303809] ALSA es1688_lib.c:113 ess_reset at 0x260: failed!!!
[   14.311000] isa sb8.0: please specify irq
[   14.331523] ALSA jazz16.c:191 please specify port
[   14.342729] ... APIC ID:      00000000 (0)
[   14.343374] ... APIC VERSION: 01050014
[   14.343937] 0000000000000000000000000000000000000000000000000000000000000000
[   14.345126] 0000000000000000000000000000000000000000000000000000000000000000
[   14.346325] 0000000000000000000000000000000000000000000000000000000000008000
[   14.347523] 
[   14.347787] number of MP IRQ sources: 15.
[   14.348396] number of IO-APIC #0 registers: 24.
[   14.349069] testing the IO APIC.......................
[   14.349868] IO APIC #0......
[   14.350303] .... register #00: 00000000
[   14.350886] .......    : physical APIC id: 00
[   14.351666] .......    : Delivery Type: 0
[   14.352255] .......    : LTS          : 0
[   14.352839] .... register #01: 00170011
[   14.353410] .......     : max redirection entries: 17
[   14.354132] .......     : PRQ implemented: 0
[   14.354764] .......     : IO APIC version: 11
[   14.355398] .... register #02: 00000000
[   14.355948] .......     : arbitration: 00
[   14.356542] .... IRQ redirection table:
[   14.357095] IOAPIC 0:
[   14.357451]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.358662]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1)
[   14.359804]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(03), M(1)
[   14.360931]  pin03, disabled, edge , high, V(33), IRR(0), S(0), logical , D(03), M(1)
[   14.362061]  pin04, enabled , edge , high, V(34), IRR(0), S(0), logical , D(03), M(1)
[   14.363201]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.364327]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(03), M(1)
[   14.365605]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(03), M(1)
[   14.366760]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(03), M(1)
[   14.367943]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(03), M(1)
[   14.369075]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.370217]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(03), M(1)
[   14.371447]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1)
[   14.372589]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(03), M(1)
[   14.373734]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(03), M(1)
[   14.374869]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(03), M(1)
[   14.375999]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.377143]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.390402]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.391557]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.392689]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.393829]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.394965]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.396101]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   14.397232] IRQ to pin mappings:
[   14.397709] IRQ0 -> 0:2
[   14.398132] IRQ1 -> 0:1
[   14.398537] IRQ3 -> 0:3
[   14.398934] IRQ4 -> 0:4
[   14.399332] IRQ5 -> 0:5
[   14.399750] IRQ6 -> 0:6
[   14.400147] IRQ7 -> 0:7
[   14.400551] IRQ8 -> 0:8
[   14.400947] IRQ9 -> 0:9
[   14.401367] IRQ10 -> 0:10
[   14.401789] IRQ11 -> 0:11
[   14.402211] IRQ12 -> 0:12
[   14.402638] IRQ13 -> 0:13
[   14.403071] IRQ14 -> 0:14
[   14.403503] IRQ15 -> 0:15
[   14.403925] .................................... done.
[   14.404682] Using IPI No-Shortcut mode
[   14.405849] page_owner is disabled
[   14.409583] pnp 00:00: setting system clock to 2017-02-26 03:48:52 UTC (1488080932)
[   14.411296] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.412288] EDD information not available.
[   14.413866] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[   14.419938] ### dt-test ### start of unittest - you will see error messages
[   14.421390] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   14.423410] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   14.425447] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[   14.426611] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[   14.427795] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   14.429129] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   14.430775] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[   14.446053] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[   14.447582] OF: overlay: overlay #5 is not topmost
[   14.455730] i2c i2c-0: Added multiplexed i2c bus 1
[   14.456628] BUG: unable to handle kernel NULL pointer dereference at   (null)
[   14.457700] IP: [<c1462877>] i2c_do_del_adapter+0xe/0x6c
[   14.460078] *pde = 00000000 
[   14.460528] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[   14.461179] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W       4.8.0-rc4-00003-gbea5b15 #2
[   14.462423] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   14.463872] task: c0044080 task.stack: c0046000
[   14.464525] EIP: 0060:[<c1462877>] EFLAGS: 00210282 CPU: 1
[   14.465308] EIP is at i2c_do_del_adapter+0xe/0x6c
[   14.465990] EAX: c1c8a320 EBX: 00000000 ECX: c4061515 EDX: 00000000
[   14.466902] ESI: c1c8a388 EDI: cf637000 EBP: c0047d8c ESP: c0047d80
[   14.467800]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[   14.468576] CR0: 80050033 CR2: 00000000 CR3: 01ed1000 CR4: 000006d0
[   14.469468] Stack:
[   14.469779]  00000000 cf637000 cf637000 c0047d94 c14628e0 c0047dac c130add0 c016c2f4
[   14.471034]  cf638d5c cf637000 cf637000 c0047dc8 c1462ce0 c14628d5 c1be9f2c cf634d14
[   14.472279]  c0047de4 cf637000 c0047e04 c14651f2 c0047de4 00000014 c1b2e799 00000000
[   14.473548] Call Trace:
[   14.473909]  [<c14628e0>] __process_removed_adapter+0xb/0xf
[   14.474704]  [<c130add0>] bus_for_each_drv+0x3a/0x67
[   14.475417]  [<c1462ce0>] i2c_del_adapter+0x74/0x1b0
[   14.476119]  [<c14628d5>] ? i2c_do_del_adapter+0x6c/0x6c
[   14.476891]  [<c14651f2>] i2c_mux_del_adapters+0x63/0x7c
[   14.477650]  [<c15cb912>] unittest_i2c_mux_remove+0xe/0x12
[   14.478432]  [<c1461b30>] i2c_device_remove+0x2b/0x54
[   14.479148]  [<c130bf2c>] driver_probe_device+0x137/0x297
[   14.479935]  [<c130c0ed>] __driver_attach+0x61/0x7d
[   14.480637]  [<c130aaed>] bus_for_each_dev+0x43/0x67
[   14.481338]  [<c130c2a0>] driver_attach+0x14/0x16
[   14.482015]  [<c130c08c>] ? driver_probe_device+0x297/0x297
[   14.482812]  [<c130b114>] bus_add_driver+0xb4/0x185
[   14.483525]  [<c130c78d>] driver_register+0x6e/0xa0
[   14.484219]  [<c1462f89>] i2c_register_driver+0x4f/0x5b
[   14.484967]  [<c1d27d35>] of_unittest_overlay+0x649/0x7c2
[   14.485737]  [<c1d28a27>] of_unittest+0xb79/0xbe3
[   14.486427]  [<c11b0be9>] ? kobject_add+0x5b/0x66
[   14.487100]  [<c1632545>] ? add_sysfs_fw_map_entry+0x3c/0x7f
[   14.487905]  [<c1d27eae>] ? of_unittest_overlay+0x7c2/0x7c2
[   14.488701]  [<c1cdeba3>] do_one_initcall+0x7e/0xfc
[   14.489401]  [<c1056209>] ? parse_args+0x19b/0x26f
[   14.490096]  [<c1cded68>] ? kernel_init_freeable+0x147/0x1eb
[   14.490906]  [<c1cded84>] kernel_init_freeable+0x163/0x1eb
[   14.491689]  [<c170d049>] kernel_init+0x8/0xd0
[   14.492322]  [<c17122e2>] ret_from_kernel_thread+0xe/0x24
[   14.493108]  [<c170d041>] ? rest_init+0xa5/0xa5
[   14.493757] Code: 8d 40 04 ba 54 cd b9 c1 e8 a6 56 d5 ff 85 c0 74 07 89 d8 e8 27 fe ff ff 31 c0 5b 5d c3 55 89 e5 57 89 d7 56 53 8d 70 68 8b 50 68 <8b> 1a 8d 8a 80 fd ff ff 81 eb 80 02 00 00 eb 3f 39 79 18 75 2c
[   14.497629] EIP: [<c1462877>] i2c_do_del_adapter+0xe/0x6c SS:ESP 0068:c0047d80
[   14.498684] CR2: 0000000000000000
[   14.499163] ---[ end trace f70d4e126f7ee101 ]---
[   14.499841] Kernel panic - not syncing: Fatal exception
[   14.500622] Kernel Offset: disabled

Elapsed time: 20

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu kvm64
	-kernel /pkg/linux/i386-randconfig-h1-02252243/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15
	-initrd /osimage/quantal/quantal-core-i386.cgz
	-m 369
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sda5/disk0-quantal-ivb41-51,media=disk,if=virtio
	-drive file=/fs/sda5/disk1-quantal-ivb41-51,media=disk,if=virtio
	-drive file=/fs/sda5/disk2-quantal-ivb41-51,media=disk,if=virtio
	-drive file=/fs/sda5/disk3-quantal-ivb41-51,media=disk,if=virtio
	-drive file=/fs/sda5/disk4-quantal-ivb41-51,media=disk,if=virtio
	-drive file=/fs/sda5/disk5-quantal-ivb41-51,media=disk,if=virtio
	-drive file=/fs/sda5/disk6-quantal-ivb41-51,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-quantal-ivb41-51
	-serial file:/dev/shm/kboot/quantal-ivb41-51/serial
	-serial file:/dev/shm/kboot/quantal-ivb41-51/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	root=/dev/ram0
	hung_task_panic=1
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	link=/kbuild-tests/run-queue/quantal-ivb41/i386-randconfig-h1-02252243/linux-devel:devel-spot-201702252217:bea5b158ff0da9c7246ff391f754f5f38e34577a:bisect-linux-39/.vmlinuz-bea5b158ff0da9c7246ff391f754f5f38e34577a-20170226034040-53-ivb41
	branch=linux-devel/devel-spot-201702252217
	BOOT_IMAGE=/pkg/linux/i386-randconfig-h1-02252243/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
