On Fri, Apr 07 2017, Thinh Nguyen wrote:
> f_mass_storage has a memorry barrier issue with the sleep and wake
> functions that can cause a deadlock. This results in intermittent hangs
> during MSC file transfer. The host will reset the device after receiving
> no response to resume the transfer. This issue is seen when dwc3 is
> processing 2 transfer-in-progress events at the same time, invoking
> completion handlers for CSW and CBW. Also this issue occurs depending on
> the system timing and latency.
>
> To increase the chance to hit this issue, you can force dwc3 driver to
> wait and process those 2 events at once by adding a small delay (~100us)
> in dwc3_check_event_buf() whenever the request is for CSW and read the
> event count again. Avoid debugging with printk and ftrace as extra
> delays and memory barrier will mask this issue.
>
> Scenario which can lead to failure:
> -----------------------------------
> 1) The main thread sleeps and waits for the next command.
> 2) bulk_in_complete() wakes up main thread for CSW.
> 3) bulk_out_complete() tries to wake up the running main thread for CBW.
> 4) thread_wakeup_needed is not loaded with correct value in sleep_thread().
> 5) Main thread goes to sleep.
>
> See more detail below:
>
> Note the 2 critical variables.
> * common->thread_wakeup_needed
> * bh->state
>
> Eval'd | CPU0 (main thread) | CPU1
> --------+------------------------------------------+----------------------
> | get_next_command() |
> | ... |
> while(1)| while (bh->state != BUF_STATE_FULL) { |
> | for (;;) { |
> | set_current_state(TASK_INTERRUPTIBLE);|
> if(0) | if (thread_wakeup_needed) |
> | schedule() |
> | | bulk_in_complete() {
> | | smp_wmb();
> | | bh->state = BUF_STATE_EMPTY
> | | smp_wmb();
> | | thread_wakeup_needed = 1
> | | wake_up_process()
> | | }
> | /* 2nd for loop iteration */ |
> | for (;;) { |
> | set_current_state(TASK_INTERRUPTIBLE);|
> if(1) | if (thread_wakeup_needed) |
> | break |
> | } |
> | | bulk_out_complete() {
> | | smp_wmb();
> | __set_current_state(TASK_RUNNING); |
> | thread_wakeup_needed = 0; |
> | smp_rmb(); |
> | |
> | /* 2nd while loop iteration */ |
> while(1)| while (bh->state != BUF_STATE_FULL) { |
> | | bh->state = BUF_STATE_FULL;
> | | smp_wmb();
> | -->| thread_wakeup_needed = 1
> | | wake_up_process()
> | | }
> | for (;;) { |
> | set_current_state(TASK_INTERRUPTIBLE);|
> if(0) | if (thread_wakeup_needed) |<--
> | schedule() |
> | |
> | <THREAD GOES TO SLEEP AND WAITS> |
>
> thread_wakeup_needed is not guaranteed to be loaded before checking it.
> Note that this happens when wake_up_process() is called on a running
> process.
>
> This patch fixes this issue by explicitly use smp_mb() after clearing of
> thread_wakeup_needed in the sleep function. It serializes the order in
> which thread_wakeup_needed is loaded and stored, thus prevent loading
> the wrong value when checking it in the sleeper.
>
> However, a better solution in the future would be to use wait_queue
> method that takes care of managing memory barrier between waker and
> waiter.
>
> See DEFINE_WAIT_FUNC comment in kernel scheduling wait.c as this
> solution is similar to its implementation.
>
> Signed-off-by: Thinh Nguyen <[email protected]>
Acked-by: Michal Nazarewicz <[email protected]>
> ---
> drivers/usb/gadget/function/f_mass_storage.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/function/f_mass_storage.c
> b/drivers/usb/gadget/function/f_mass_storage.c
> index 4c8aacc232c0..f40433eb8259 100644
> --- a/drivers/usb/gadget/function/f_mass_storage.c
> +++ b/drivers/usb/gadget/function/f_mass_storage.c
> @@ -627,7 +627,7 @@ static int sleep_thread(struct fsg_common *common, bool
> can_freeze)
> }
> __set_current_state(TASK_RUNNING);
> common->thread_wakeup_needed = 0;
> - smp_rmb(); /* ensure the latest bh->state is visible */
> + smp_mb(); /* ensure the latest bh->state is visible */
> return rc;
> }
--
Best regards
ミハウ “𝓶𝓲𝓷𝓪86” ナザレヴイツ
«If at first you don’t succeed, give up skydiving»
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
