We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
 drivers/usb/musb/tusb6010_omap.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index db2e4c379ccf..4e1a6e4a61b8 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -389,15 +389,19 @@ static int tusb_omap_dma_program(struct dma_channel 
*channel, u16 packet_sz,
 
        if (chdat->tx) {
                /* Send transfer_packet_sz packets at a time */
-               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-                       chdat->transfer_packet_sz);
+               u32 psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+               psize &= ~0x7ff;
+               psize |= chdat->transfer_packet_sz;
+               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
                musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
        } else {
                /* Receive transfer_packet_sz packets at a time */
-               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-                       chdat->transfer_packet_sz << 16);
+               u32 psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+               psize &= ~(0x7ff << 16);
+               psize |= (chdat->transfer_packet_sz << 16);
+               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
                musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
-- 
2.12.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to