Currently VBUS is turned off while a usb device is detached, and turned
on again by the polling routine. This short period VBUS loss prevents
usb modem to switch mode.
VBUS should be constantly on for host-only mode, so this changes the
driver to not turn off VBUS for host-only mode.
Fixes: 2f3fd2c5bde1 ("usb: musb: Prepare dsps glue layer for PM runtime
support")
Cc: [email protected] #v4.11
Reported-by: Moreno Bartalucci <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
---
drivers/usb/musb/musb_dsps.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 9c7ee26ef388..bc6a9be2ccc5 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -245,6 +245,11 @@ static int dsps_check_status(struct musb *musb, void
*unused)
dsps_mod_timer_optional(glue);
break;
case OTG_STATE_A_WAIT_BCON:
+ /* keep VBUS on for host-only mode */
+ if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+ dsps_mod_timer_optional(glue);
+ break;
+ }
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
skip_session = 1;
/* fall */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
