On Tue, May 16, 2017 at 11:54:41PM +0300, Andrey Korolyov wrote:
> This patch adds support for recognition of ARM-USB-TINY(H) devices which
> are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack
> and serial console.
> 
> By suggestion from Johan Hovold it is possible to replace
> ftdi_jtag_quirk with a bit more generic construction. Since all
> Olimex-ARM debuggers has exactly two ports, we could safely always use
> only second port within the debugger family.

I had already fixed up and applied your v2, but ok let's convert the old
entries as well for consistency and to make things easier for the stable
maintainers.

> Signed-off-by: Andrey Korolyov <[email protected]>
> Cc: stable <[email protected]>
> ---
>  drivers/usb/serial/ftdi_sio.c     | 12 ++++++++----
>  drivers/usb/serial/ftdi_sio_ids.h |  2 ++
>  2 files changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
> index d38780f..3f6da7c 100644
> --- a/drivers/usb/serial/ftdi_sio.c
> +++ b/drivers/usb/serial/ftdi_sio.c
> @@ -809,10 +809,14 @@ static const struct usb_device_id id_table_combined[] = 
> {
>       { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
>       { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
>               .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
> -     { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
> -             .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
> -     { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
> -             .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
> +     { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID,
> +             1) },
> +     { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID,
> +             1) },
> +     { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID,
> +             1) },
> +     { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID,
> +             1) },

No need to break these lines even if checkpatch complains. We're a bit
more allowing for id tables.

>       { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
>               .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
>       { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
> diff --git a/drivers/usb/serial/ftdi_sio_ids.h 
> b/drivers/usb/serial/ftdi_sio_ids.h
> index 71fb9e5..4fcf1ce 100644
> --- a/drivers/usb/serial/ftdi_sio_ids.h
> +++ b/drivers/usb/serial/ftdi_sio_ids.h
> @@ -882,6 +882,8 @@
>  /* Olimex */
>  #define OLIMEX_VID                   0x15BA
>  #define OLIMEX_ARM_USB_OCD_PID               0x0003
> +#define OLIMEX_ARM_USB_TINY_PID      0x0004
> +#define OLIMEX_ARM_USB_TINY_H_PID    0x002a
>  #define OLIMEX_ARM_USB_OCD_H_PID     0x002b
>  
>  /*

Now applied, thanks.

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to