Use this method to make sure we don't try to connect on speeds not
supported by the gadget driver.
Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
---
drivers/usb/dwc3/gadget.c | 101 ++++++++++++++++++++++++++--------------------
1 file changed, 58 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d2bd28dc28b6..01cd7ddc9981 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1827,49 +1827,6 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), 0);
}
- reg = dwc3_readl(dwc->regs, DWC3_DCFG);
- reg &= ~(DWC3_DCFG_SPEED_MASK);
-
- /*
- * WORKAROUND: DWC3 revision < 2.20a have an issue
- * which would cause metastability state on Run/Stop
- * bit if we try to force the IP to USB2-only mode.
- *
- * Because of that, we cannot configure the IP to any
- * speed other than the SuperSpeed
- *
- * Refers to:
- *
- * STAR#9000525659: Clock Domain Crossing on DCTL in
- * USB 2.0 Mode
- */
- if (dwc->revision < DWC3_REVISION_220A) {
- reg |= DWC3_DCFG_SUPERSPEED;
- } else {
- switch (dwc->maximum_speed) {
- case USB_SPEED_LOW:
- reg |= DWC3_DCFG_LOWSPEED;
- break;
- case USB_SPEED_FULL:
- reg |= DWC3_DCFG_FULLSPEED;
- break;
- case USB_SPEED_HIGH:
- reg |= DWC3_DCFG_HIGHSPEED;
- break;
- case USB_SPEED_SUPER_PLUS:
- reg |= DWC3_DCFG_SUPERSPEED_PLUS;
- break;
- default:
- dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
- dwc->maximum_speed);
- /* fall through */
- case USB_SPEED_SUPER:
- reg |= DWC3_DCFG_SUPERSPEED;
- break;
- }
- }
- dwc3_writel(dwc->regs, DWC3_DCFG, reg);
-
/*
* We are telling dwc3 that we want to use DCFG.NUMP as ACK TP's NUMP
* field instead of letting dwc3 itself calculate that automatically.
@@ -2001,6 +1958,63 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
return 0;
}
+static void dwc3_gadget_set_speed(struct usb_gadget *g,
+ enum usb_device_speed speed)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+ reg &= ~(DWC3_DCFG_SPEED_MASK);
+
+ /*
+ * WORKAROUND: DWC3 revision < 2.20a have an issue
+ * which would cause metastability state on Run/Stop
+ * bit if we try to force the IP to USB2-only mode.
+ *
+ * Because of that, we cannot configure the IP to any
+ * speed other than the SuperSpeed
+ *
+ * Refers to:
+ *
+ * STAR#9000525659: Clock Domain Crossing on DCTL in
+ * USB 2.0 Mode
+ */
+ if (dwc->revision < DWC3_REVISION_220A) {
+ reg |= DWC3_DCFG_SUPERSPEED;
+ } else {
+ switch (speed) {
+ case USB_SPEED_LOW:
+ reg |= DWC3_DCFG_LOWSPEED;
+ break;
+ case USB_SPEED_FULL:
+ reg |= DWC3_DCFG_FULLSPEED;
+ break;
+ case USB_SPEED_HIGH:
+ reg |= DWC3_DCFG_HIGHSPEED;
+ break;
+ case USB_SPEED_SUPER:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
+ case USB_SPEED_SUPER_PLUS:
+ reg |= DWC3_DCFG_SUPERSPEED_PLUS;
+ break;
+ default:
+ dev_err(dwc->dev, "invalid speed (%d)\n", speed);
+
+ if (dwc->revision & DWC3_REVISION_IS_DWC31)
+ reg |= DWC3_DCFG_SUPERSPEED_PLUS;
+ else
+ reg |= DWC3_DCFG_SUPERSPEED;
+ }
+ }
+ dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+ spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
static const struct usb_gadget_ops dwc3_gadget_ops = {
.get_frame = dwc3_gadget_get_frame,
.wakeup = dwc3_gadget_wakeup,
@@ -2008,6 +2022,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
.pullup = dwc3_gadget_pullup,
.udc_start = dwc3_gadget_start,
.udc_stop = dwc3_gadget_stop,
+ .udc_set_speed = dwc3_gadget_set_speed,
};
/* --------------------------------------------------------------------------
*/
--
2.11.0.295.gd7dffce1ce
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
