On Fri, Jun 9, 2017 at 10:43 PM, Alan Stern <st...@rowland.harvard.edu> wrote: > On Fri, 9 Jun 2017, Kai-Heng Feng wrote: > >> As Alan Stern points out [1], the PME signal is not enabled when >> controller is in D3, therefore it's not being woken up when new deivces >> get plugged in. >> >> Workaround this bug by preventing the controller enters D3 power state. >> >> [1] https://www.spinics.net/lists/linux-usb/msg157462.html >> >> Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com> >> --- >> drivers/usb/host/ehci-pci.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c >> index 93326974ff4b..616685f83954 100644 >> --- a/drivers/usb/host/ehci-pci.c >> +++ b/drivers/usb/host/ehci-pci.c >> @@ -181,6 +181,8 @@ static int ehci_pci_setup(struct usb_hcd *hcd) >> if (pdev->device == 0x7808) { >> ehci->use_dummy_qh = 1; >> ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 >> EHCI dummy qh workaround\n"); >> + >> + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; >> } >> break; >> case PCI_VENDOR_ID_VIA: > > Is this really the right solution? Maybe it would be better to allow > the controller to go into D3 provided no wakeup signal is needed. You > could do: > > device_set_wakeup_capable(&pdev->dev, 0);
This doesn't work. After applying this function, still nothing happens when devices get plugged in. IIUC this function disable the wakeup function, but what I want to do here is to have PME signal works even when runtime PM is enabled. I also saw some legacy PCI PM stuff, so I also tried: device_set_wakeup_capable(&pdev->dev, 1); ...doesn't work either. > > Another alternative is to put the controller into D2 instead of D3, but > (1) I don't know how to do that, and (2) we don't know if wakeup > signalling works any better in D2 than it does in D3. I'll try if D2 works. Thanks for the review. > > Alan Stern > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
