This enables the platform-roothub for the xhci-plat driver. This allows
specifying a PHY for each port via devicetree. All PHYs will then be
enabled/disabled by the platform-roothub driver.

One example where this is required is the Amlogic GXL and GXM SoCs:
They are using a dwc3 USB controller with up to three ports enabled on
the internal roothub. Using only the top-level "phy" properties does not
work here since one can only specify one "usb2-phy" and one "usb3-phy",
while actually at least two "usb2-phy" have to be specified.

Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
 Documentation/devicetree/bindings/usb/usb-xhci.txt |  7 ++++++
 drivers/usb/host/Kconfig                           |  1 +
 drivers/usb/host/xhci-plat.c                       | 27 +++++++++++++++++++++-
 drivers/usb/host/xhci.h                            |  2 ++
 4 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt 
b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 2d80b60eeabe..31b4f681e9ca 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -29,6 +29,13 @@ Optional properties:
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable 
mechanism
 
+sub-nodes:
+- optionally there can be a node for the root-hub, see usb-roothub.txt in the
+  current directory
+- one or more nodes with reg 1-31 for each port to which a device is connected.
+  See usb-device.txt in the current directory for more information.
+
+
 Example:
        usb@f0931000 {
                compatible = "generic-xhci";
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b8b05c786b2a..3bdc49e89c0f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -36,6 +36,7 @@ config USB_XHCI_PCI
 config USB_XHCI_PLATFORM
        tristate "Generic xHCI driver for a platform device"
        select USB_XHCI_RCAR if ARCH_RENESAS
+       select USB_PLATFORM_ROOTHUB
        ---help---
          Adds an xHCI host driver for a generic platform device, which
          provides a memory space and an irq.
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index c04144b25a67..6fa27393e241 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/acpi.h>
 
+#include "platform-roothub.h"
 #include "xhci.h"
 #include "xhci-plat.h"
 #include "xhci-mvebu.h"
@@ -285,10 +286,20 @@ static int xhci_plat_probe(struct platform_device *pdev)
                        goto put_usb3_hcd;
        }
 
-       ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+       xhci->platform_roothub = platform_roothub_init(sysdev);
+       if (IS_ERR(xhci->platform_roothub)) {
+               ret = PTR_ERR(xhci->platform_roothub);
+               goto disable_usb_phy;
+       }
+
+       ret = platform_roothub_power_on(xhci->platform_roothub);
        if (ret)
                goto disable_usb_phy;
 
+       ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+       if (ret)
+               goto disable_plat_roothub;
+
        if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
                xhci->shared_hcd->can_do_streams = 1;
 
@@ -311,6 +322,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
 dealloc_usb2_hcd:
        usb_remove_hcd(hcd);
 
+disable_plat_roothub:
+       platform_roothub_power_off(xhci->platform_roothub);
+
 disable_usb_phy:
        usb_phy_shutdown(hcd->usb_phy);
 
@@ -342,6 +356,8 @@ static int xhci_plat_remove(struct platform_device *dev)
        usb_remove_hcd(xhci->shared_hcd);
        usb_phy_shutdown(hcd->usb_phy);
 
+       platform_roothub_power_off(xhci->platform_roothub);
+
        usb_remove_hcd(hcd);
        usb_put_hcd(xhci->shared_hcd);
 
@@ -374,6 +390,11 @@ static int __maybe_unused xhci_plat_suspend(struct device 
*dev)
        if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
                clk_disable_unprepare(xhci->clk);
 
+       if (ret)
+               return ret;
+
+       platform_roothub_power_off(xhci->platform_roothub);
+
        return ret;
 }
 
@@ -386,6 +407,10 @@ static int __maybe_unused xhci_plat_resume(struct device 
*dev)
        if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
                clk_prepare_enable(xhci->clk);
 
+       ret = platform_roothub_power_on(xhci->platform_roothub);
+       if (ret)
+               return ret;
+
        ret = xhci_priv_resume_quirk(hcd);
        if (ret)
                return ret;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3c6da1f93c84..1079ac1dc596 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1725,6 +1725,8 @@ struct xhci_hcd {
        int             msix_count;
        /* optional clock */
        struct clk              *clk;
+       /* optional platform root-hub */
+       struct platform_roothub *platform_roothub;
        /* data structures */
        struct xhci_device_context_array *dcbaa;
        struct xhci_ring        *cmd_ring;
-- 
2.13.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to