This patch fixes an issue that some registers may be not initialized
after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise,
if a cable is not connected, the driver will not enable INTENB0.VBSE
after resume. And then, the driver cannot detect the VBUS.
Fixes: ca8a282a5373 ("usb: gadget: renesas_usbhs: add suspend/resume support")
Cc: <[email protected]> # v3.2+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
---
drivers/usb/renesas_usbhs/common.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/renesas_usbhs/common.c
b/drivers/usb/renesas_usbhs/common.c
index 623c513..f0ce304 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -752,8 +752,10 @@ static int usbhsc_resume(struct device *dev)
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
- if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
+ if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
usbhsc_power_ctrl(priv, 1);
+ usbhs_mod_autonomy_mode(priv);
+ }
usbhs_platform_call(priv, phy_reset, pdev);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
