[PATCH] Drivers: usb: serial: Replace unsigned to unsigned int and fix line over 80 characters

[Himanshu Jha]

This patch fixes the following checkpatch.pl warnings:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
WARNING: line over 80 characters

Signed-off-by: Himanshu Jha <himanshujha199...@gmail.com>
---
 drivers/usb/serial/ch341.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 351745a..f4ee53c 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -43,8 +43,10 @@
 /* second interrupt byte */
 #define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
 
-/* status returned in third interrupt answer byte, inverted in data
-   from irq */
+/*
+ * status returned in third interrupt answer byte, inverted in data
+ * from irq
+ */
 #define CH341_BIT_CTS 0x01
 #define CH341_BIT_DSR 0x02
 #define CH341_BIT_RI  0x04
@@ -92,7 +94,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct ch341_private {
        spinlock_t lock; /* access lock */
-       unsigned baud_rate; /* set baud rate */
+       unsigned int baud_rate; /* set baud rate */
        u8 mcr;
        u8 msr;
        u8 lcr;
@@ -121,7 +123,7 @@ static int ch341_control_out(struct usb_device *dev, u8 
request,
 
 static int ch341_control_in(struct usb_device *dev,
                            u8 request, u16 value, u16 index,
-                           char *buf, unsigned bufsize)
+                           char *buf, unsigned int bufsize)
 {
        int r;
 
@@ -289,6 +291,7 @@ static int ch341_port_remove(struct usb_serial_port *port)
 static int ch341_carrier_raised(struct usb_serial_port *port)
 {
        struct ch341_private *priv = usb_get_serial_port_data(port);
+
        if (priv->msr & CH341_BIT_DCD)
                return 1;
        return 0;
@@ -358,7 +361,7 @@ static void ch341_set_termios(struct tty_struct *tty,
                struct usb_serial_port *port, struct ktermios *old_termios)
 {
        struct ch341_private *priv = usb_get_serial_port_data(port);
-       unsigned baud_rate;
+       unsigned int baud_rate;
        unsigned long flags;
        u8 lcr;
        int r;
@@ -442,11 +445,13 @@ static void ch341_break_ctl(struct tty_struct *tty, int 
break_state)
        dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: 
%x, reg2: %x\n",
                __func__, break_reg[0], break_reg[1]);
        if (break_state != 0) {
-               dev_dbg(&port->dev, "%s - Enter break state requested\n", 
__func__);
+               dev_dbg(&port->dev, "%s - Enter break state requested\n",
+                       __func__);
                break_reg[0] &= ~CH341_NBREAK_BITS;
                break_reg[1] &= ~CH341_LCR_ENABLE_TX;
        } else {
-               dev_dbg(&port->dev, "%s - Leave break state requested\n", 
__func__);
+               dev_dbg(&port->dev, "%s - Leave break state requested\n",
+                       __func__);
                break_reg[0] |= CH341_NBREAK_BITS;
                break_reg[1] |= CH341_LCR_ENABLE_TX;
        }
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html