TCPCI stands for typec port controller interface, its implementation
has full typec port control with power delivery support, it's a
standard i2c slave with GPIO input as irq interface, detail see spec
"Universal Serial Bus Type-C Port Controller Interface Specification
Revision 1.0, Version 1.1"
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../devicetree/bindings/usb/typec-tcpci.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
new file mode 100644
index 0000000..9268440
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -0,0 +1,36 @@
+TCPCI(Typec port cotroller interface) binding
+---------------------------------------------
+
+Required properties:
+- compatible: should be "usb,tcpci".
+- reg: the i2c slave address of typec port controller device.
+- interrupt-parent: the phandle to the interrupt controller which provides
+ the interrupt.
+- interrupts: interrupt specification for tcpci alert.
+- port-type: typec port type.
+- default-role: preferred power role if port type is "dual".
+
+Required properties only for power source or drp:
+- src-pdos
+
+Required properties only for power sink or drp:
+- snk-pdos
+- max-snk-mv
+- max-snk-ma
+- op-snk-mw
+
+Example:
+
+ptn5110@50 {
+ compatible = "usb,tcpci";
+ reg = <0x50>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ port-type = "dual";
+ default-role = "sink";
+ src-pdos = <0x380190c8>;
+ snk-pdos = <0x380190c8 0x3802d0c8>;
+ max-snk-mv = <9000>;
+ max-snk-ma = <1000>;
+ op-snk-mw = <9000>;
+};
--
2.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
