evdo bit can be set or reset. We can not trust evdo bit
status after bootloader stage
Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
---
Changes v1->v2:
- None
---
drivers/usb/chipidea/usbmisc_imx.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c
b/drivers/usb/chipidea/usbmisc_imx.c
index a52f5a8..1f47ef6 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -151,14 +151,18 @@ static int usbmisc_imx25_post(struct imx_usbmisc_data
*data)
if (data->index)
return 0;
- if (data->evdo) {
- spin_lock_irqsave(&usbmisc->lock, flags);
- reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
- val = readl(reg);
- writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg);
- spin_unlock_irqrestore(&usbmisc->lock, flags);
- usleep_range(5000, 10000); /* needed to stabilize voltage */
- }
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
+ val = readl(reg);
+
+ if (data->evdo)
+ val |= MX25_BM_EXTERNAL_VBUS_DIVIDER;
+ else
+ val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER;
+
+ writel(val, reg);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ usleep_range(5000, 10000); /* needed to stabilize voltage */
return 0;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
