Em Fri, 26 Jan 2018 12:17:37 -0200 Mauro Carvalho Chehab <mche...@s-opensource.com> escreveu:
> Hi Alan, > > Em Mon, 8 Jan 2018 14:15:35 -0500 (EST) > Alan Stern <st...@rowland.harvard.edu> escreveu: > > > On Mon, 8 Jan 2018, Linus Torvalds wrote: > > > > > Can somebody tell which softirq it is that dvb/usb cares about? > > > > I don't know about the DVB part. The USB part is a little difficult to > > analyze, mostly because the bug reports I've seen are mostly from > > people running non-vanilla kernels. > > I suspect that the main reason for people not using non-vanilla Kernels > is that, among other bugs, the dwc2 upstream driver has serious troubles > handling ISOCH traffic. > > Using Kernel 4.15-rc7 from this git tree: > https://git.linuxtv.org/mchehab/experimental.git/log/?h=softirq_fixup > > (e. g. with the softirq bug partially reverted with Linux patch, and > the DWC2 deferred probe fixed) > > With a PCTV 461e device, with uses em28xx driver + Montage frontend > (with is the same used on dvbsky hardware - except for em28xx). > > This device doesn't support bulk for DVB, just ISOCH. The drivers work > fine on x86. > > Using a test signal at the bit rate of 56698,4 Kbits/s, that's what > happens, when capturing less than one second of data: > > $ dvbv5-zap -c ~/dvb_channel.conf "tv brasil" -l universal -X 100 -m > -t2dvbv5-zap -c ~/dvb_channel.conf "tv brasil" -l universal -X 100 -m -t2 > Using LNBf UNIVERSAL > Universal, Europe > Freqs : 10800 to 11800 MHz, LO: 9750 MHz > Freqs : 11600 to 12700 MHz, LO: 10600 MHz > using demux 'dvb0.demux0' > reading channels from file '/home/mchehab/dvb_channel.conf' > tuning to 11468000 Hz > (0x00) Signal= -33.90dBm > Lock (0x1f) Signal= -33.90dBm C/N= 30.28dB postBER= 2.33x10^-6 > dvb_dev_set_bufsize: buffer set to 6160384 > dvb_set_pesfilter to 0x2000 > 354.08s: Starting capture > 354.73s: only read 59220 bytes > 354.73s: Stopping capture > > [ 354.000827] dwc2 3f980000.usb: DWC OTG HCD EP DISABLE: > bEndpointAddress=0x84, ep->hcpriv=116f41b2 > [ 354.000859] dwc2 3f980000.usb: DWC OTG HCD EP RESET: bEndpointAddress=0x84 > [ 354.010744] dwc2 3f980000.usb: --Host Channel 5 Interrupt: Frame Overrun-- > ... (hundreds of thousands of Frame Overrun messages) > [ 354.660857] dwc2 3f980000.usb: --Host Channel 5 Interrupt: Frame Overrun-- > [ 354.660935] dwc2 3f980000.usb: DWC OTG HCD URB Dequeue > [ 354.660959] dwc2 3f980000.usb: Called usb_hcd_giveback_urb() > [ 354.660966] dwc2 3f980000.usb: urb->status = 0 > [ 354.660992] dwc2 3f980000.usb: DWC OTG HCD URB Dequeue > [ 354.661001] dwc2 3f980000.usb: Called usb_hcd_giveback_urb() > [ 354.661008] dwc2 3f980000.usb: urb->status = 0 > [ 354.661054] dwc2 3f980000.usb: DWC OTG HCD URB Dequeue > [ 354.661065] dwc2 3f980000.usb: Called usb_hcd_giveback_urb() > [ 354.661072] dwc2 3f980000.usb: urb->status = 0 > [ 354.661107] dwc2 3f980000.usb: DWC OTG HCD URB Dequeue > [ 354.661120] dwc2 3f980000.usb: Called usb_hcd_giveback_urb() > [ 354.661127] dwc2 3f980000.usb: urb->status = 0 > [ 354.661146] dwc2 3f980000.usb: DWC OTG HCD URB Dequeue > [ 354.661158] dwc2 3f980000.usb: Called usb_hcd_giveback_urb() > [ 354.661165] dwc2 3f980000.usb: urb->status = 0 Btw, Just in case, I also applied all recent pending dwc2 patches I found at linux-usb (even trivial unrelated ones) at: https://git.linuxtv.org/mchehab/experimental.git/log/?h=dwc2_patches No differences. ISOCH is still broken. If anyone wants to see the full logs, it is there: https://pastebin.com/XJYyTwPv Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
