* Andreas Kemnade <andr...@kemnade.info> [180127 08:34]: > On dm3730 there are enumeration problems after resume. > Investigation led to the cause that the MUSB_POWER_SOFTCONN > bit is not set. If it was set before suspend (because it > was enabled via musb_pullup()), it is set in > musb_restore_context() so the pullup is enabled. But then > musb_start() is called which overwrites MUSB_POWER and > therefore disables MUSB_POWER_SOFTCONN, so no pullup is > enabled and the device is not enumerated.
I just gave this patch a quick try and things seem to behave for me from PM point of view: Tested-by: Tony Lindgren <t...@atomide.com> Unrelated to this patch, I also noticed that we now somehow higher idle power consumption initially when musb modules are loaded. It used to idle after that but now to get things to idle I had to plug and unplug a USB device once to the musb port. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
