Upgraded to 4.15.3 and now UAS works, strange...
Anyhow now the enclosure is connected via an USB 3.0 HUB (self powered
in my case) and it seems to be stable
Devs, apparently there is some problem operating this chipset with
Intel USB controller directly
I have googled a little bit aroud and actually found someone
complaining of a possible similar issue also on Windows:


Note that the USB controller I have is identical to the Chris one:

00:14.0 USB controller [0c03]: Intel Corporation Device [8086:22b5]
(rev 36) (prog-if 30 [XHCI])
        Subsystem: Intel Corporation Device [8086:7270]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 117
        Region 0: Memory at 91500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

2018-02-14 8:36 GMT+01:00 Menion <men...@gmail.com>:
> That is very strange
> My device has same vid:pid of your one, but it goes blacklisted...
> I am running kernel 4.15.1, I will try to upgrade
> What kind of enclosure is yours? Mine is an Orico 9553RU3 5 bay
> enclosure with RAID
> Bye
> 2018-02-13 23:41 GMT+01:00 Chris Murphy <li...@colorremedies.com>:
>> On Mon, Feb 12, 2018 at 12:57 AM, Menion <men...@gmail.com> wrote:
>>> I wanted to test my enclosure with an hub, but I have just realized
>>> that now the JMS567 is UAS blacklisted by default in kernel
>>> 4.15.x.........
>>> Can you check if it still works removing the dedicated hub external
>>> power supply?
>> I've upgraded to 4.15.3, and it does not appear to be blacklisted for uas
>> driver.
>> kernel: usbcore: registered new interface driver usb-storage
>> kernel: scsi host2: uas
>> kernel: usbcore: registered new interface driver uas
>> Full kernel messages upon insertion directly to the computer's USB port
>> (hub not involved at all):
>> https://paste.fedoraproject.org/paste/bPPAl~ngYjktfC--i7NqJA/raw
>> --
>> Chris Murphy
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to