Andreas,
On 16/02/18 20:35, Andreas Kemnade wrote:
> On Fri, 16 Feb 2018 13:13:11 -0500 (EST)
> Alan Stern <st...@rowland.harvard.edu> wrote:
>
>> On Fri, 16 Feb 2018, Andreas Kemnade wrote:
>>
>>> This powers down the phy and on a gta04 it reduces
>>> suspend current by 13 mA.
>>> For unknown reasons usb does not power on properly.
>>> Also calling usb_phy_shutdown() here feels wrong
>>> apparently the reset line has to be activated.
>>> usb_phy_set_suspend is not enough here. The power
>>> consumption still stays approximately the same as
>>> without any patch.
>>>
>>> With a device connected the device does not enumerate
>>> after resume. A rmmod ehci-omap ; modprobe ehci-omap
>>> does not make it reenumerade.
>>> So there is still something wrong here.
>>>
>>> Signed-off-by: Andreas Kemnade <andr...@kemnade.info>
>>> ---
>>> drivers/usb/host/ehci-omap.c | 59
>>> ++++++++++++++++++++++++++++++++++++++++++--
>>> 1 file changed, 57 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
>>> index 8d8bafc70c1f..0be2ccf8182a 100644
>>> --- a/drivers/usb/host/ehci-omap.c
>>> +++ b/drivers/usb/host/ehci-omap.c
>>> @@ -266,6 +266,58 @@ static int ehci_hcd_omap_remove(struct platform_device
>>> *pdev)
>>> return 0;
>>> }
>>>
>>> +
>>> +static int __maybe_unused ehci_omap_suspend(struct device *dev)
>>> +{
>>> + struct usb_hcd *hcd = dev_get_drvdata(dev);
>>> + struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
>>> + int ret;
>>> + int i;
>>> +
>>> + ret = ehci_suspend(hcd, false);
>>> + if (ret) {
>>> + dev_err(dev, "ehci suspend failed: %d\n", ret);
>>> + return ret;
>>> + }
>>> + for (i = 0; i < omap->nports; i++) {
>>> + if (omap->phy[i])
>>> + usb_phy_shutdown(omap->phy[i]);
>>> + }
>>> + pm_runtime_put_sync(dev);
>>
>> Why do you include a runtime PM call here, given that the driver
>> doesn't support runtime suspend or resume?
>>
> Well, the parent (drivers/mfd/omap-usb-host.c) has, and there are runtime PM
> calls here in the _probe/_remove functions, so it seems to be sane to do it
> here, too.
>
>
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int __maybe_unused ehci_omap_resume(struct device *dev)
>>> +{
>>> + struct usb_hcd *hcd = dev_get_drvdata(dev);
>>> + struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
>>> + int i;
>>> +
>>> + pm_runtime_get_sync(dev);
>>> + /*
>>> + * An undocumented "feature" in the OMAP3 EHCI controller,
>>> + * causes suspended ports to be taken out of suspend when
>>> + * the USBCMD.Run/Stop bit is cleared (for example when
>>> + * we do ehci_bus_suspend).
>>> + * This breaks suspend-resume if the root-hub is allowed
>>> + * to suspend. Writing 1 to this undocumented register bit
>>> + * disables this feature and restores normal behavior.
>>> + */
>>> + ehci_write(hcd->regs, EHCI_INSNREG04,
>>> + EHCI_INSNREG04_DISABLE_UNSUSPEND);
>>
>> Doesn't this code belong in ehci_hcd_omap_probe()? I assume you only
>> need to set this undocumented bit once, not every time the controller
>> is suspended. And in any case, according to the comment, you would
>> need to take care of this before the root hub is suspended -- by the
>> time the controller is suspended, it is already too late.
>>
>
> I am not really sure about this one. It is set in ehci_hcd_omap_probe()
> so it is set before suspend. I set it here to ensure it is re-set when
> the controller is powered down too much to keep register contents. I
> do not know if that is the case. But I thought it would not harm.
>
If the Hardware SAR (Save and restore) functionality is enabled then
everything will be restored by hardware after a sleep to wake transition.
But you will need this patch to enable SAR for the USB power domain.
https://lkml.org/lkml/2013/7/10/356
Missing this might be the reason why things break for you after a system
suspend/resume.
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
