I have an old (ancient) Compaq Proliant 1000 (486 DX 66) and two Prosignia 500 (Pentium 150)
All have SMART Raid controllers with a several scsi drives each. They are already up and running in RAID-5, but one of the Prosignias has a dodgy raid stack. I've scored 2x4Gb drives and want to change it to RAID-0 on two drives, or can I use the two good 2 Gb drives ? I have no software to administer the raid set, and the compaq web site has been less than useful... all I found was winNT or win2000 array config software. Any thoughts? No, the machine has no IDE, and only two PCI slots, occupied by the raid controller and a 100 Mbit NIC. I'd have to either dump the PCI raid controller for an IDE controller and drive, or use an (E)ISA controller.
