I'm really trying not to upgrade to RH7.2 here, 'cos it'll ruin my desktop. So I wondered if anyone has had experience with USB on the 2.2.19-6.2.15 kernel.
I'm trying to get my Sony DSC-S75 camera recognised as a usb-storage device. I have loaded usbcore, usb-ohci, and usb-storage. I know I can do SCSI stuff because I have a working parallel Zip drive which works on /dev/sda4. I did try usb-uhci and uhci along and they both segfault. So I stick with usb-ohci. Anyways, when I connect my wondrous camera, I get this: [vik@tikki vik]$ cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=cc0a3000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=054c ProdID=0010 Rev= 3.22 S: Manufacturer=Sony S: Product=Sony DSC C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms See where it says "Driver=(none)" 4 lines up? That bit should say "Driver=usb-storage" and I don't know why it doesn't. Any guidance appreciated. Vik :v) -- /"\ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . /"\ \ / ASCII Ribbon Campaign One of The Olliver Family \ / X - NO HTML/RTF in e-mail http://olliver.family.gen.nz X / \ - NO MSWord docs in e-mail Public PGP key available there / \
