Hi Rob,
the module may be the generic smc9194 by Eric Stahlman according
to the info in /usr/src/linux/drivers/net/smc9194.c
By "auto detected" do you mean by the "kernel" screen output on boot
or by "kudzu"? Sometimes kudzu will work if you remove the card,
remove settings if asked by kudzu on next boot,then replace the card
again.
Not sure what the console tool is other than 'setup' although in
earlier RH versions 'webmin'and 'linuxconf' could configure the
network devices.
You may be able to configure manually using mc, kate or pico.
Probably-
#/etc/rc.d/rc.local
/sbin/modprobe smc9194
#/etc/modules.conf
alias eth0 smc9194
options smc9194 io=10 io=0x300 ifport=0 #usually io=xx is all you need.
hth,
keith.
On Sat, 12 Oct 2002, Robert Fisher wrote:
> I have just installed RedHat8 on a Dell laptop with a docking station
> with an SMC 9000 network card.
>
> The NIC was not auto detected. Is there a manual configuration tool for
> it? (Like there is sndconfig for manual configuration of sound cards)
