Jim Cheetham wrote:
On Mon, 2004-05-17 at 12:19, C. Falconer wrote:
A 300 Gb IDE hard drive in a USB2 or Firewire external case....
Seconded. We dumped an n.CDRW solution for a set of removeable hard-drives. The external USB connect unit we tried wasn't too stable under Linux, so we went for IDE caddies, and a cold boot to remove/insert the drives. Seeing as it's a dedicated backup server that wasn't too much of a hassle.
With the sort of money you've been spending on tape drives, I'd say you should be looking at a frontloading hotswap n.raid-1 array, so you can pull drives (when the rebuild process has completed) any time you like.
-jim
Thirded! Want to buy any DDS drives?
I'd probably look at a Gigabyte ( 10Gig? ) SAN to a separate box in a production environment. USB2 is ok... I've used LaCie drives in the past and they seem to be the most robust for off-site stuff, but disaster recovery is only a small part of any backup solution, and having the stuff available online is much better.
I built one solution that required 3 servers, 8 dlt-40's and a 400 tape autochanger on a dedicated fibre network in 2000. Now, I could build a better disk-based one for less than 10% of the cost of licenses alone...
$0.02
Steve
