On Mon, 2004-06-07 at 20:31, Zane Gilmore wrote:
> Darryl,
> Don't know much about PCI ADSL cards but you are running an old
> distribution.
> 
> IIRC Redhat 9 is probably getting to be about a year old.
> (and for software that's ooold)
> 
> Seeing as though you seem to be pretty early in your installation cycle 
> it might pay to get a hold of a copy of Mandrake 10 Official. It's a 
> good newbie distro.
> 
> Don't know where Paul's internet cafe has moved to now
> (Paul where are you now?) but he flogs Linux disks @ $5 /disk.

He is starting up again soon, still in the arts centre. beyond that I am
not sure I am at liberty to say.

tried to persuade him to lend me his aerial and so on until he is back
up and running...you can see Clarendon Tower from my office.

> 
> 
> 
> Darryl Te Whata wrote:
> > I don't know if am doing this right, new to mailing lists as well.
> > 
> > I am a newbie to Linux and have installed RH9 to a 4GB slave drive on my
> > WinXp comp. (Athlon 2000xp, 512sd ram 40 + 4 GB Hdd)
> > 
> > Having dabbled previously, I always dropped the install because of lack of
> > Internet access (too hard basket).
> > 
> > I am now trying to give it a real go but am having trouble configuring the
> > hardware as RH9 does not support this card out of the box.
> > 
> > I have located and installed 4 rpms from
> > http://www.data-technics.net/content.php?cat=7
> > <http://www.data-technics.net/content.php?cat=7>  ,
> > 
> > 1.  accessrunner-2.4.20-8.rh9.0.i386.rpm
> > 2.  initscripts-7.14-2.cnx.i386.rpm
> > 3.  linux-atm-2.4.1.cc-2.0.i386.rpm
> > 4.  ppp-2.4.2b3-rh9.0.i386.rpm
> > 
> > which have resulted in the boot sequence locating the card and initializing
> > an adsl connection but when I log onto RH there is still no card to find in
> > the hardware browser.
> > 
> > I have a couple of areas of concern, I would like to check the configuration
> > within the RPM's to ensure they are what I need, and I need an idiots guide
> > on the configuration steps when everything boots. I have been looking but
> > the level of help on the net is a little above me.
> > 
> > Thanx
> > 
> > Darryl Te Whata
> > mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> 
> > 

Reply via email to