On Sunday 17 March 2002 06:12 pm, you wrote: > Its a bit strange that you'd get SDL as a tarball, and SDL-devel as an > RPM. It should all be one or the other, not a mixture. Plus if you're > building SDL from a tarball, then you should already have gotten the > 'devel' stuff with the tarball. I'm wondering if you have ended up with > a mixed version. Might be best to remove SDL completely as best as you > can, and reinstall it again all from either RPM or tarball.
Right will try that. > ALso, which version of XFree86 are you using? I noticed some internal > references to X11 stuff in those errors. If its the Caldera hack job of > XFree86, you might want to consider grabbing XFree86-4.2.0 and using > that instead. Have had Xfree-4.2.0 going for sometime now > I've built MPlayer on 3 different boxes, and never ran into any > problems, but i tend to use alot of pure sources rather than distro > RPMs. Mostly I use tarballs so maybe its the rpm thats buggered it up. Start from sqaure one again. Funnuly I have most others working, VLC, MTV, Xine etc. -- Keith Antoine (GANDALF) aka 'skippy' 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage _______________________________________________ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
