Hello, I'm a Fedora Linux enthusiast but also a Linux newbie (about one year experience) running Linux 2.6.18-1.2200.fc5smp
1. I successfully compiled and installed the latest uvcvideo driver from the trunk (uvcvideo-52.tar.gz) 2. After I plug in my Logitech Quick Cam Orbit/Sphere (046d:08c2) camera, the driver loads upon boot and shows up as character device /dev/video0. 3. But all the video producing applications I've tried so far, produce a jumbled picture such as this 7 kB sample viewable at http://foxgulch.com/Miscellaneous/snap.jpg If you look closely, you can see parts of my face, but not in the sequence my Mother intended. {;-) 4. That above jpg was produced with uvccapture. Under luvcview20060920, I can control the pan/tilt etc of the 046d:08C2 logitech orbit/sphere usb web camera. However the fps number shown at the top constantly varies and the picture is repeatedly similarly jumbled. 5. I conclude my problem is somehow cockpit error on my part but after grinding away for several days, I'd appreciate any help offered. Thank you in advance, Larry Jones _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
