Hi, As a certain other company would put it: This behavior is by design. ;-)
If you try the same thing on Windows, you will see that the pan/tilt buttons are disabled for resolutions higher than VGA. It's a limitation of the hardware. Cheers, Martin On Thu, 02 Nov 2006 15:41:44 +0100, Noble Pepper <[EMAIL PROTECTED]> wrote: > Hello again. > > I just installed a USB2.0 interface in my desktop box so I am playing > with > the higher resolutions available with the Orb. > > In 320x240 and 640x480 resolutions, the pan/tilt operates fine in both > luvcview and motion. > > When I go to 704x576 I get errors and the camera doesn't move > > In luvcview I get: > ioctl pan updown control error > Set Pan up error > ioctl tiltupdown control error > Set Tilt up error > > In motion I get: > [0] Failed to move camera!: Input/output error > [0] httpd - Read from client: Input/output error > > Since both apps have similar problems I am assuming this is a driver or > hardware problem. > > Is this a known issue? > > Are you interested in pursuing this? > > I am going to try to get more detailed info but any tips would help at > this > point. > > > > _______________________________________________ > Linux-uvc-devel mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/linux-uvc-devel _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
