Hi,
Recently got my Logitech fusion working fine with uvc applications
including Motion.
However, I have not been able to capture the sound and video together.
Kmix(running suse linux10.1) has the capture turned on.
lsusb gives Bus 001 Device 002: ID 046d:08c1 Logitech, Inc.
xawtv -hwscan gives
/dev/video1: OK [ -device /dev/video1 ]
type : v4l2
name : USB Video Class device
flags: capture
usbview gives the info below.
So the sound should be available, how do I point an application at it?
Thanks,
Brian
uvcvideo / snd-usb-audio
Serial Number: AA2BCC92
Speed: 480Mb/s (high)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 01
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 046d
Product Id: 08c1
Revision Number: 0.05
Config Number: 1
Number of Interfaces: 4
Attributes: 80
MaxPower Needed: 500mA
Interface Number: 0
Name: uvcvideo
Alternate Number: 0
Class: ff(vend.)
Sub Class: 1
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 87
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 16
Interval: 16ms
Interface Number: 2
Name: snd-usb-audio
Alternate Number: 0
Class: 01(audio)
Sub Class: 1
Protocol: 0
Number of Endpoints: 0
Interface Number: 3
Name: snd-usb-audio
Alternate Number: 0
Class: 01(audio)
Sub Class: 2
Protocol: 0
Number of Endpoints: 0
begin:vcard
fn:Brian
n:;Brian
email;internet:[EMAIL PROTECTED]
x-mozilla-html:FALSE
url:http://astronomicalresearchaustralia.org
version:2.1
end:vcard
_______________________________________________
Linux-uvc-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
